OpenAZBox PLiMOD HD Prerelease 2 Premium, Ultra, Elite Kernel 3.4.4

[zeini]

OpenAZBox PLi MOD HD Prerelease - 2 -

Enigma 2 of 11. august 2012

Drivers of 11. august 2012

Kernel of 11. august

Changes:

- 2nd Fix for 0/12V Output (confirmed by zeini -> OK)

- 2nd Fix for 2 x record in same time from same TP (confirmed by zeini -> OK)

- Correct mount point for HDD, to solve recording and timeshift problem

Download OpenAZBox PLi MOD HD Prerelease - 2- Enigma 2 Image


Flash this image only with AZUp 2.2.5 which you can download

[zeini]

Now not implemented:

• Blindscan
• CI-Modul
• Card reader not accessible
• AV Settings Pan&Scan and pillarbox do not work

Bug:

• Recordings and Timeshift coils up to 128 times is good. Rewind, but no matter, equal what setting is only about 2 times and then stops it after some time. But with 1/4/7 and 3/6/9 jump well.
• Some movies (avi, mpg) will not work for me. Maybe this is better, if we get AZPlayer.
• Sometimes, but very less tone is sibilant. If I change the channel and go back tone is clear.
• Softcam will not start automatically at start. Workaround
  
  • put the emu's manually into required folders and start them via telnet;
  • if you're capable of making scripts (or if you got hold of them extracting from .ipk), you can use the RTi Panel to start your emu's
  • and finally, once you run Emu via the RTi Panel, give the following command via telnet to enable autostart:
    

    update-rc.d softcam defaults

  • Make a restart and it will work without a need for manual starting! (thx go to user @kess for sharing this)
• Systemdate and time is wrong. So also program-time is wrong. workaround
• No EPG - only in Infobar workaround
• Not a bug - but limitations. Additional recording on the same transponder is now possible, but only for 2 channels. With second tuner also OK on Premium+, if this recorded programme is at an other transponder. Also looking a third programme no problem, even if all 3 programmes are HD channels. I have also tried to record 4 SD channels at same time (two on each transponder) and looking a fifth. Recording 4 programmes and looking the fifthty also here was no problem. But sometimes there are problems to stop this recording (duration wheels).
• 0/12V output for LNB-Control is implemented. Now you can find it in Menu > Setup > System > Customize. But this entry should be in Menu > Setup > Service Searching > Tuner configuration > for all tuners that are available. Only in this menue I can set the right adjustment automatically, if I choose an other satellite in channellist.