Page 1 of 2 12 LastLast
Results 1 to 20 of 26

Thread: NEW:::: MGCAMD 1.38a Plugin for Icecrypt Receivers

  1. #1
    Member
    Join Date
    Apr 2011
    Posts
    24
    Thanks
    0
    Thanked 25 Times in 12 Posts

    NEW:::: MGCAMD 1.38a Plugin for Icecrypt Receivers

    NEW:::::::::::::::::::::::::::::: ::: Very Stable MGCAMD 1.38a

    MGCAMD 1.38a Plugin is fully compiled for the Icecrypt S3500HDCCI, S3550HDCCI, S3600HDCCI, STC 6000 HD PVR

    Instructions.

    1. Download the plugin.zip file.
    2. Unzip the file named plugin.zip and save this to your desktop
    3. Double click on the file you have saved on your desktop i.e plugin.
    4. Once you have doubled clicked on the plugin file you will see the following files,,,, bin,,,etc,,,keys
    5. Double click on Keys.
    6. Right click your mouse on newcamd.list and open it in notepad
    7. If adding keys the layout is as followings CWS = URL PORT USERNAME PASSWORD 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    8. Replace the URL with your own URL i.e example.... free.systes.net
    9. Replace the PORT with your own PORT i.e example..... 10001
    10. Replace the USERNAME with your own USERNAME i.e example.... joe
    11. Replace the PASSWORD with your own PASSWORD i.e example...... bloggs
    12. The DES KEY is normally 01 02 03 04 05 06 07 08 09 10 11 12 13 14 but change if you have changed your own DES KEY
    13. Once you have done the above It should end up looking like this (example) : CWS= free.systes.net 10001 joe bloggs 01 02 03 04 05 06 07 08 09 10 11 12 13 14 click file then click save.
    14. Close everything down.
    15. Copy the Plugin file off your desktop on to a Blank USB Pen.
    16. Insert this into your Icecrypt S3500HDCCI, S3550HDCCI, S3600HDCCI, STC 6000 HD PVR
    17. Wait for an on screen message that says PLUGIN once you see this press the RED button on the remote control.
    18. The plugin will now install.
    19. Wait for the box to reboot.
    20. Press MENU on the remote control.
    21. Go to Plugins
    21. You will see MGCAMD in this screen
    22. Press the RED button and select it to AUTO
    23. Press the GREEN button to start MGCAMD.

    MGCAMD is far more stable than CCCAM or XCAM.

    Download Link:::: _http://max.mailbigfile.com/35a955d198989a51feaa2f1f97186840/listFiles.php
    Last edited by jasonterry; 31-05-2012 at 08:44 PM.

  2. The Following 10 Users Say Thank You to jasonterry For This Useful Post:

    aranycsapat (12-10-2012), dondusan (22-10-2012), fatboy7 (24-06-2012), flickerrr (01-05-2013), joe2419 (23-05-2012), orbit (23-06-2012), sambsue (08-12-2012), satjohn (21-04-2013), todray1 (30-05-2012), xximhxx (29-06-2014)

  3. #2
    Senior Member
    Join Date
    Feb 2010
    Posts
    153
    Thanks
    60
    Thanked 16 Times in 14 Posts
    Could somebody clear a few things up for me please ,the port you need to select where do I find this out ,the password do you just pick a password or is there a default password that you change ,the same with the username is there a default that you change or do you just pick one

  4. #3
    V.I.P blakmumba's Avatar
    Join Date
    Feb 2012
    Posts
    338
    Thanks
    101
    Thanked 385 Times in 173 Posts
    Quote Originally Posted by paulipm View Post
    Could somebody clear a few things up for me please ,the port you need to select where do I find this out ,the password do you just pick a password or is there a default password that you change ,the same with the username is there a default that you change or do you just pick one
    The port, username etc is given to you via a c/n-line (card sharing). Can't say further more as not allowed on forum
    Last edited by blakmumba; 22-06-2012 at 04:01 PM.

  5. The Following User Says Thank You to blakmumba For This Useful Post:

    paulipm (23-06-2012)

  6. #4
    Senior Member
    Join Date
    Feb 2010
    Posts
    153
    Thanks
    60
    Thanked 16 Times in 14 Posts
    Thanks for clearing that up .

  7. #5
    Senior Member fatboy7's Avatar
    Join Date
    Nov 2011
    Posts
    125
    Thanks
    45
    Thanked 109 Times in 56 Posts
    Sorry 'File is not available', when trying to download.

    Can anyone upload a copy, cant wait to try it.

    Many Thanks...

  8. #6
    Senior Member fatboy7's Avatar
    Join Date
    Nov 2011
    Posts
    125
    Thanks
    45
    Thanked 109 Times in 56 Posts
    Can anyone upload, please, please, please.

    Many Thanks....

  9. The Following User Says Thank You to fatboy7 For This Useful Post:

    todray1 (17-01-2014)

  10. #7
    Senior Member fatboy7's Avatar
    Join Date
    Nov 2011
    Posts
    125
    Thanks
    45
    Thanked 109 Times in 56 Posts
    Here it is, if anyone wants it.

    I've found it to be very stable.

    Enjoy...
    Attached Files Attached Files

  11. The Following 6 Users Say Thank You to fatboy7 For This Useful Post:

    buck401 (22-07-2012), ColdAsICE (23-07-2012), dcdon86 (17-08-2012), Gaza (28-11-2012), joe2419 (22-07-2012), vasjox (30-12-2012)

  12. #8
    Verified Registered User joe2419's Avatar
    Join Date
    Dec 2004
    Posts
    21
    Thanks
    111
    Thanked 13 Times in 5 Posts
    thanks fatboy7

  13. #9
    Member
    Join Date
    Jan 2010
    Posts
    65
    Thanks
    1
    Thanked 3 Times in 1 Post
    you think this also can be used at Octagon, ex 1018, 1028 the new 918G-series ?
    Or someone know where i can find this plugin for 918G-serie\1018?
    Last edited by bibo_norway; 07-08-2012 at 09:21 PM.

  14. #10
    Member
    Join Date
    Jan 2010
    Posts
    65
    Thanks
    1
    Thanked 3 Times in 1 Post
    File Not Available

    Unfortunately, the file is no longer available. It may have expired, or may have been downloaded more than the maximum number of times. Please contact the sender of the file.
    Quote Originally Posted by jasonterry View Post
    NEW:::::::::::::::::::::::::::::: ::: Very Stable MGCAMD 1.38a

    MGCAMD 1.38a Plugin is fully compiled for the Icecrypt S3500HDCCI, S3550HDCCI, S3600HDCCI, STC 6000 HD PVR

    Instructions.

    1. Download the plugin.zip file.
    2. Unzip the file named plugin.zip and save this to your desktop
    3. Double click on the file you have saved on your desktop i.e plugin.
    4. Once you have doubled clicked on the plugin file you will see the following files,,,, bin,,,etc,,,keys
    5. Double click on Keys.
    6. Right click your mouse on newcamd.list and open it in notepad
    7. If adding keys the layout is as followings CWS = URL PORT USERNAME PASSWORD 01 02 03 04 05 06 07 08 09 10 11 12 13 14
    8. Replace the URL with your own URL i.e example.... free.systes.net
    9. Replace the PORT with your own PORT i.e example..... 10001
    10. Replace the USERNAME with your own USERNAME i.e example.... joe
    11. Replace the PASSWORD with your own PASSWORD i.e example...... bloggs
    12. The DES KEY is normally 01 02 03 04 05 06 07 08 09 10 11 12 13 14 but change if you have changed your own DES KEY
    13. Once you have done the above It should end up looking like this (example) : CWS= free.systes.net 10001 joe bloggs 01 02 03 04 05 06 07 08 09 10 11 12 13 14 click file then click save.
    14. Close everything down.
    15. Copy the Plugin file off your desktop on to a Blank USB Pen.
    16. Insert this into your Icecrypt S3500HDCCI, S3550HDCCI, S3600HDCCI, STC 6000 HD PVR
    17. Wait for an on screen message that says PLUGIN once you see this press the RED button on the remote control.
    18. The plugin will now install.
    19. Wait for the box to reboot.
    20. Press MENU on the remote control.
    21. Go to Plugins
    21. You will see MGCAMD in this screen
    22. Press the RED button and select it to AUTO
    23. Press the GREEN button to start MGCAMD.

    MGCAMD is far more stable than CCCAM or XCAM.

  15. #11
    Member Gaza's Avatar
    Join Date
    Nov 2009
    Posts
    70
    Thanks
    11
    Thanked 6 Times in 4 Posts
    Quote Originally Posted by fatboy7 View Post
    Here it is, if anyone wants it.

    I've found it to be very stable.

    Enjoy...
    Quote Originally Posted by bibo_norway View Post
    File Not Available

    Unfortunately, the file is no longer available. It may have expired, or may have been downloaded more than the maximum number of times. Please contact the sender of the file.
    you can down load the file from Fatboy 7 post

  16. #12
    Junior Member
    Join Date
    Dec 2004
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I have 5 lines I did this.
    cws= url port username password
    cws= url port username password
    cws= url port username password
    cws= url port username password
    cws= url port username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14

    this installed but didnt work could someone please tell me if it was right much appreciated

  17. #13
    Senior Member fatboy7's Avatar
    Join Date
    Nov 2011
    Posts
    125
    Thanks
    45
    Thanked 109 Times in 56 Posts
    Hi Dobbin.

    If its used for an client, edit the mg.cfg file to have MGcamd used this way G: { 01 }.

    That should sort it out.

    Enjoy...

  18. #14
    Member
    Join Date
    Aug 2012
    Posts
    49
    Thanks
    51
    Thanked 18 Times in 11 Posts
    Thank you Fatboy 7

  19. #15
    Banned
    Join Date
    Jul 2012
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    eyxaristo: Gnorsi:: Ο10:

  20. #16
    Junior Member
    Join Date
    Mar 2012
    Posts
    14
    Thanks
    4
    Thanked 0 Times in 0 Posts
    it is possible to use mgcamd to enter clines, it looks like it but everytime i enter one using mgcamdconfigure it does not remember it, i tried adding a cccam.list file but that did not work either


    any help much appreciated

  21. #17
    V.I.P
    Join Date
    May 2008
    Posts
    582
    Thanks
    42
    Thanked 872 Times in 262 Posts
    Zoot if your using this MGcamd plugin you need to be on V*.10.67 or earlier firmware as it hasn't been updated for the newer API layer.

  22. The Following User Says Thank You to ColdAsICE For This Useful Post:

    iiiZOOTiii (15-10-2012)

  23. #18
    V.I.P
    Join Date
    May 2008
    Posts
    582
    Thanks
    42
    Thanked 872 Times in 262 Posts
    The latest plugin dated 21OCT2012 bundle now has an updated MGcamd but no MGcamd config so you need to either ftp your lines into the MGcam once installed or edit them into the plugin bundle(use notepad to edit the CWS, in the newcamd.list, in the keys folder) before installing it.
    Tested and working with the later firmwares now though!
    Last edited by ColdAsICE; 22-10-2012 at 06:04 PM.

  24. The Following 2 Users Say Thank You to ColdAsICE For This Useful Post:

    buck401 (22-10-2012), echelon (22-10-2012)

  25. #19
    Registered kennyboy's Avatar
    Join Date
    Jan 2005
    Posts
    598
    Thanks
    349
    Thanked 64 Times in 49 Posts
    will this work on v+duo with cccam 2.3 or 2.1.3 bh image 1.7.8 thanks

  26. #20
    Security Admin echelon's Avatar
    Join Date
    Dec 2004
    Posts
    12,732
    Thanks
    13,913
    Thanked 9,112 Times in 4,411 Posts
    Quote Originally Posted by kennyboy View Post
    will this work on v+duo with cccam 2.3 or 2.1.3 bh image 1.7.8 thanks
    read the thread title and section details

    ICECRYPT

Page 1 of 2 12 LastLast

Similar Threads

  1. Icecrypt Plugin for S3500, S4000 and STC6000
    By geoffh in forum ICECRYPT
    Replies: 9
    Last Post: 27-10-2011, 12:04 PM
  2. Mgcamd Plugin
    By reboot in forum Plugins
    Replies: 8
    Last Post: 20-08-2011, 12:35 PM
  3. Icecrypt Plugin for S3500, S4000 and STC6000
    By ColdAsICE in forum Plugins
    Replies: 0
    Last Post: 28-07-2011, 02:02 PM
  4. Icecrypt S4000 Plugin 22310
    By ManikM in forum ICECRYPT
    Replies: 0
    Last Post: 25-03-2010, 02:53 PM
  5. Fortis_CCCam, for all Fortis receivers, Including Icecrypt
    By Friendly-Face in forum Tools & Editors
    Replies: 0
    Last Post: 06-12-2009, 02:48 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •