Astra 4A (4.8°E) 11785V S/R 27500 FEC 3/4:

SVT1 ABC
SVT1 Gavledala
SVT1 Mittnytt
SVT1 Nordnytt
SVT1 Østnytt
SVT1 REG
SVT1 Smalandsnytt
SVT1 Sydnytt
SVT1 Tvarsnytt
SVT1 Varmlandsnytt
SVT1 Vasterbottensn
SVT1 Vastnytt
SVT2 ABC
SVT2 Gavledala
SVT2 Mittnytt
SVT2 Nordnytt
SVT2 Østnytt
SVT2 REG
SVT2 Smalandsnytt
SVT2 Sydnytt
SVT2 Tvarsnytt
SVT2 Varmlandsnytt
SVT2 Vasterbottensn
SVT2 Vastnytt
SVT24

Astra 4A (4.8°E) 11823V S/R 27500 FEC 3/4:

DR1
DR2

Astra 4A (4.8°E) 11881H S/R 27500 FEC 3/4:

SVT Barnkanalen/Kunskapskanalen
SVT1
SVT2

Astra 4A (4.8°E) 12015V S/R 27500 FEC 3/4:

NRK Super/NRK3
NRK1
NRK1 Midtnytt
NRK1 More og Romsda
NRK1 Nordland
NRK1 Nordnytt
NRK1 Østafjells
NRK1 Østfold
NRK1 Østnytt
NRK1 Rogaland
NRK1 Sorlandet
NRK1 Tegnsprak
NRK2
NRK1 HD

Astra 4A (4.8°E) 12476V S/R 27500 FEC 3/4:

TV 2/Bornholm
TV 2/Fyn
TV 2/Lorry
TV 2/Midt-Vest
TV 2/Nord
TV 2/Øst
TV 2/Østjylland
TV 2/Syd

One way to add these to your Spiderbox is using the Fausto v1.45 program as a server and Spiderbox as the receiving Client:

In Fausto in the "FaustoServers.cfg" file which is opened under the Server TAB/Configuration TAB. Enter a line like:

N: XXX.X.X.X 25000 0102030405060708091011121314 {090F/000000}

and one like:

U: username password

Where XXX.X.X.X is the IP Address of your PC

username is the username you want

and password is the password you want

also be sure to put a "# " ("hash & a space" in the examples you don't want in the FaustoServers.cfg file)

Save the FaustoServers.cfg
Then start the Fausto Client (Again under Server TAB on Fausto there is the Manager TAB, Load and Start).

On your Spiderbox on the accessory menu select Network go into Client Set up and set a Newcamd account with the same info:

Type: NEWCAMD
Name or IP Address: XXX.X.X.X
Port: 25000
ID: username
Password: password
DES Key: 0102030405060708091011121314
and Apply

if you are not connecting your Spiderbox to the internet with Ethernet cable, yes you need a Season Interface from your PC (RS232) to a CAM (eg Dragon CAM, T-REX CAM) into your Spiderbox's CI slot (make sure CaID 090F in included in the CAM file) this may have the same problem you have with your Diablo thou....although you can change the delay setting this may help.

and: You can also delete all Seca(Mediaguard) and all Irdeto2 keys from your Spiderbox after loading a softcam and use the above Server/Client to run Canal Digitaal NL (I2 0622), Bulsat (I2 0604), RAI (Seca 0100 000030) & if you receive 4!Story @ 4W Telespasio Hungary (Seca 0100 00002A) the advantage of this is the fausto key.bin contains now & probable next Bulsat keys so on a day when Bulsat changes key (like yesterday) you can carry on watching your program with no need to update the softcam or enter keys from the menus.