Results 1 to 8 of 8

Thread: nemesis 2.5

  1. #1
    Registered kennyboy's Avatar
    Join Date
    Jan 2005
    Posts
    598
    Thanks
    349
    Thanked 64 Times in 49 Posts

    nemesis 2.5

    NEMESIS 2.5 104r4 Dual Enigma on-line, next step 105r1
    Latest 2.4 101r1 stable version Here
    Latest 2.3 095r6 stable version Here


    Attention for all users!
    Please read change-log 100r8, 101r1 and here before updating!!!

    Next step 105r1
    Updated 16.02.2012-14:30



    All updates until 104r4 are included
    All updates until 103r5 are included
    All updates until 102r8 are included
    Added time syncronization via Internet at dreambox boot (OpenVPN improvement)
    Update dreambox-dvb-modules to 20120216 for all machines
    Update to InitramFS 2.5 dm7020hd (thanks @gutemine)
    Update dreambox-secondstage to 86r0 for dm7020hd
    Fix crash on manual scan on mode 2
    Fix enable swap file on reboot
    Fix load EPG from backup on reboot
    Add preview for Picon
    Small fix on Addons Panel
    Update enigma2-plugins
    Up
    Nemesis 2.5 Release 104r4 (On-Line)
    Updated 14.02.2012-17:30



    All updates until 103r5 are included
    All updates until 102r8 are included
    Update to InitramFS 2.4, for all Machines (thanks @gutemine)
    Update dreambox-dvb-modules to 20120213 for all machines
    Update dreambox-secondstage to 85r0 for dm7020hd
    Update Enigma2 to 3.2.2 (20120214)
    Update Kernel
    Full support for USB-DTT in both mode 1 and 2
    You can now choose between 3 different Extended InfoBar (Lite, Medium or Full)
    Blue->Yellow->Setup Extended InfoBar OSD->Choice Extended InfoBar type


    Code optimization on Blue Panel
    Code optimization on Addons Panel
    Update enigma2-plugins
    Up
    Release 103r5 (Private Release)
    Updated 03.02.2012-14:00



    All updates until 102r8 are included
    Update dreambox-dvb-modules to 20120202 for all machines
    Update Bootlogo for version 2.5 (thanks @XPlanet)
    Replaced the old default skin, with the new eXcort luX (thanks @mmark & Stardust)
    Code optimization on Blue Panel
    Move to 2.5 version
    Update enigma2-plugins
    Up
    Release 102r8 (Private Release)



    All updates until 101r1 are included
    Update bootlogo
    Add skin Preview on Addons Panel
    Update CrossEPG
    Update to InitramFS 2.2, for all Machines (thanks @gutemine)
    Update Kernel (add EFI/GPT partition recognition support, enable large block device support)
    Update PCSC-Lite to 1.8.2
    Update gst-plugin-good (raise dts, ac3 and aac parse elements' ranks)
    Update libpagecache (fix occasional program aborts/crashes (e.g. on e2 recording stop))
    Downgrade plugin bitrateviewer, now work in both mode 1 and 2
    Update to Webinterface 1.7.1
    Change Green Button text "Initialize" to "Manage" on HDD Manager Screen
    Fix Automatic download on StayUp plugin
    Fix crash on HDD Manager
    Fix crash on EPG Info Screen when plugin EasyInfo is installed
    Fix some Italian translation
    Update enigma2-plugins
    Up
    Release 101r1


    All updates until 100r8 are included
    Fixed EPG data loss at the transition between Enigma2 modes
    Removed unused entry(Backup EPG, Save EPG) on Green Panel in Mode 1
    Fix CrossEPG on Mode 1 (Enigma2 3.2) on dm7020hd
    Add possibility to choice demux for CrossEPG
    Blue->Yellow->EPG Configuration->CrossEPG demux


    Small fix on default Skin
    Up
    Release 100r8 (Private Release)


    All updates until 099r1 are included
    Update radio.mvi screen logo
    Add enable/disable deepstandby function on front power button long press
    Blue->Yellow->Setup Console/RC/Enigma->Enable deepstandby on front power button long press


    Add new choice "do nothing" on RC 'Action on long powerbutton press'
    Add Unwanted Reboot Manager
    Blue->Yellow->Setup Console/RC/Enigma->Go to standby after (unwanted) reboot


    Update skin default
    Replace HD-Glass-15 skin to old skin default
    Fix HDD info on Device Status Panel
    Update Plugin StayUP, Fix load epg on Mode 1
    Fix Mode 2 on dm7020hd now enigma run in both mode 1 & 2
    Load EPG in a cache without restart Enigma2 on E2 3.2.1 (Thank's Dr.Best)
    No plugin epgloader need!!!! Plese do not install it!!!!
    If you have epgloader plugin in your box, please remove it, before upgrade

    Update Linux Kernel (Small fix)
    Update bootlogo
    Update dreambox-dvb-modules to 2011109 dm500hd, 800, 800se, 8000
    Update dreambox-dvb-modules to 2011121 dm7020hd
    Update Mode 1 enigma2 to 3.2.1
    Partially rewrited Green Panel (Epg Control Center)
    Fix crash on Mode 2 on System Info (Yellow and Blue Button)
    Fix crash on Mode 2 using new setting created by Blindscan (I hope )
    Fix loading kernel module for rt3070 based WIFI Adapter
    Fix skin to support new Harddisk Manager
    Update Italian translation
    Update enigma2-plugins
    After updating, and reboot, you do mount HDD with new Harddisk Manager!

    Menu->Setup->System->Harddisk
    Up
    Release 099r1


    All updates until 098r6 are included
    Update bootlogo
    Fix crash on Timer function
    Update LED Manager plugin to 0.2
    Re-add epgblacklist on Enigma Experimental (Mode 2)
    Update enigma2-plugins
    Up
    Release 098r6


    All updates until 095r6 are included
    Move to 2.4 version
    Changed bootlogo
    Update dm7020hd dreambox-dvb-modules (20111102)
    Add LED Manager plugin
    Add full new Enigma 3.2 features (Only Using Mode 1)
    Update enigma2-plugins
    Update CrossEPG (Now you do download Rytec Provider)
    You can run this image in two mode:

    Mode 1: Enigma2 3.2


    Blindscan Support (Tuner: BCM4505, BCM4506, Alps BSBE1 C01A/D01A)
    Limited CrossEPG patch
    No LCN Scanner patch
    Full Enigma2 3.2 features
    Mode 2: Enigma2 Experimental


    No Blindscan Support
    Full CrossEPG patch
    LCN Scanner patch
    More Enigma2 binary patch
    After flashing, the image start in Mode 1: Enigma2 3.2
    If you want change Mode, you can choose enigma2 to run via Blue Panel:


    Blue->Yellow->Configure Console/RC/Enigma->Select Enigma Version
    Restart Enigma2
    Up
    Release 095r6 (Latest 2.3 Version)


    Update to InitramFS 1.8, for all Machines (thanks @gutemine)
    Fix some italian translation
    Update Lithuanian Language (Thanks @adga)
    Update sqlite to 3.6.23.1 (dm7020hd)
    Update CCID to 1.4.5
    Update CrossEPG
    Update CrossEPG (mpepg.conf) for Mediaset (Thanks @pappa)
    Add MerlinEPGCenter plugin on Extension
    Add New RC config (Enigma Key Green Swap) Green Key Press = subchannel
    Green Key Press >1s = EPG Manager
    Blu->Yellow->Setup Console/RC to choice RC Map.

    Update enigma2
    Update enigma2-plugins
    Up
    Update to new release Instruction

    This Update work only if you have a Nemesis svn >= 098r6!!!!

    If you have a SVN version < 092, or SSL < 84, follow this:

    Flash SecondStage Loader 84-r0 (nfi version)
    Reboot
    Flash Image SVN 104r4
    Reboot
    If you have a SVN version >= 092, or SSL = 84

    You can directly flash a new 104r4

  2. #2
    Senior Member apriliarsvr's Avatar
    Join Date
    Aug 2009
    Posts
    227
    Thanks
    3
    Thanked 7 Times in 6 Posts
    iv done this update online and got it all working ok....

    i then tried to reflash my box with the updated image above ( just for practice) and for some reason when i power up the box while holding the button in the ip address dosent come up... it just goes straight in and boots up....so if i wanted to change the image i cant..!

    anyone else had this problem or is it me box..!!??
    Last edited by apriliarsvr; 17-02-2012 at 04:31 PM.

  3. #3
    Verified Registered User
    Join Date
    Dec 2004
    Posts
    220
    Thanks
    23
    Thanked 19 Times in 10 Posts
    hi, i had this, in my case removing anything connected to the usb sockets cured it for me.

  4. #4
    Senior Member apriliarsvr's Avatar
    Join Date
    Aug 2009
    Posts
    227
    Thanks
    3
    Thanked 7 Times in 6 Posts
    i havnt got anything in my usb sockets..!

    have you got an ip address up on this image in question hazzardboy..!

  5. #5
    Verified Registered User
    Join Date
    Dec 2004
    Posts
    220
    Thanks
    23
    Thanked 19 Times in 10 Posts
    yes, but i use a dreambox 800se

  6. #6
    Senior Member apriliarsvr's Avatar
    Join Date
    Aug 2009
    Posts
    227
    Thanks
    3
    Thanked 7 Times in 6 Posts
    ok.. problem sorted..... on this box... and the 8k ..its the channel up button is pressed and not the power button to get the ip..!

  7. #7
    Registered kennyboy's Avatar
    Join Date
    Jan 2005
    Posts
    598
    Thanks
    349
    Thanked 64 Times in 49 Posts
    NEMESIS 2.5 105r4 Dual Enigma on-line (Not 7020hd)
    Latest 2.4 101r1 stable Here , or 2.3 095r6 stable Here


    Attention read carrefully!
    to do before upgrade to 105r4!!!!



    Remove all Skins installed from Addons and reboot with de default skin
    the old skins are no more compliant with the 105r4
    Only for dm7020hd download dreambox-secondstage-86r0 and install it via web-if
    proceed with the upgrade on-line
    Nemesis 2.5 105r4 (On-Line)
    Updated 23.02.2012-13:30



    All updates until 104r4 are included
    All updates until 103r5 are included
    All updates until 102r8 are included
    Update Kernel
    Added full german locale translation (thanks @bigstar2005)
    Added time syncronization via Internet at dreambox boot (OpenVPN improvement)
    Update dreambox-dvb-modules to 20120216 for all machines
    Update to InitramFS 2.5 for all machines (thanks @gutemine)
    Update dreambox-secondstage to 86r0 for dm7020hd
    Fix crash on manual scan on mode 2
    Fix enable swap file on reboot
    Fix load EPG from backup on reboot
    Fix hang on addons panel on dm800
    Fix bug on HDD Manager, now network share as hdd replacement is correctly mounted
    Add preview for Picon and Boologo
    Small fix on Addons Panel
    Update enigma2-plugins
    Up
    Nemesis 2.5 Release 104r4
    Updated 14.02.2012-17:30



    All updates until 103r5 are included
    All updates until 102r8 are included
    Update to InitramFS 2.4, for all Machines (thanks @gutemine)
    Update dreambox-dvb-modules to 20120213 for all machines
    Update dreambox-secondstage to 85r0 for dm7020hd
    Update Enigma2 to 3.2.2 (20120214)
    Update Kernel
    Full support for USB-DTT in both mode 1 and 2
    You can now choose between 3 different Extended InfoBar (Lite, Medium or Full)
    Blue->Yellow->Setup Extended InfoBar OSD->Choice Extended InfoBar type


    Code optimization on Blue Panel
    Code optimization on Addons Panel
    Update enigma2-plugins
    Up
    Release 103r5 (Private Release)
    Updated 03.02.2012-14:00



    All updates until 102r8 are included
    Update dreambox-dvb-modules to 20120202 for all machines
    Update Bootlogo for version 2.5 (thanks @XPlanet)
    Replaced the old default skin, with the new eXcort luX (thanks @mmark & Stardust)
    Code optimization on Blue Panel
    Move to 2.5 version
    Update enigma2-plugins
    Up
    Release 102r8 (Private Release)



    All updates until 101r1 are included
    Update bootlogo
    Add skin Preview on Addons Panel
    Update CrossEPG
    Update to InitramFS 2.2, for all Machines (thanks @gutemine)
    Update Kernel (add EFI/GPT partition recognition support, enable large block device support)
    Update PCSC-Lite to 1.8.2
    Update gst-plugin-good (raise dts, ac3 and aac parse elements' ranks)
    Update libpagecache (fix occasional program aborts/crashes (e.g. on e2 recording stop))
    Downgrade plugin bitrateviewer, now work in both mode 1 and 2
    Update to Webinterface 1.7.1
    Change Green Button text "Initialize" to "Manage" on HDD Manager Screen
    Fix Automatic download on StayUp plugin
    Fix crash on HDD Manager
    Fix crash on EPG Info Screen when plugin EasyInfo is installed
    Fix some Italian translation
    Update enigma2-plugins
    Up
    Release 101r1


    All updates until 100r8 are included
    Fixed EPG data loss at the transition between Enigma2 modes
    Removed unused entry(Backup EPG, Save EPG) on Green Panel in Mode 1
    Fix CrossEPG on Mode 1 (Enigma2 3.2) on dm7020hd
    Add possibility to choice demux for CrossEPG
    Blue->Yellow->EPG Configuration->CrossEPG demux


    Small fix on default Skin
    Up
    Release 100r8 (Private Release)


    All updates until 099r1 are included
    Update radio.mvi screen logo
    Add enable/disable deepstandby function on front power button long press
    Blue->Yellow->Setup Console/RC/Enigma->Enable deepstandby on front power button long press


    Add new choice "do nothing" on RC 'Action on long powerbutton press'
    Add Unwanted Reboot Manager
    Blue->Yellow->Setup Console/RC/Enigma->Go to standby after (unwanted) reboot


    Update skin default
    Replace HD-Glass-15 skin to old skin default
    Fix HDD info on Device Status Panel
    Update Plugin StayUP, Fix load epg on Mode 1
    Fix Mode 2 on dm7020hd now enigma run in both mode 1 & 2
    Load EPG in a cache without restart Enigma2 on E2 3.2.1 (Thank's Dr.Best)
    No plugin epgloader need!!!! Plese do not install it!!!!
    If you have epgloader plugin in your box, please remove it, before upgrade

    Update Linux Kernel (Small fix)
    Update bootlogo
    Update dreambox-dvb-modules to 2011109 dm500hd, 800, 800se, 8000
    Update dreambox-dvb-modules to 2011121 dm7020hd
    Update Mode 1 enigma2 to 3.2.1
    Partially rewrited Green Panel (Epg Control Center)
    Fix crash on Mode 2 on System Info (Yellow and Blue Button)
    Fix crash on Mode 2 using new setting created by Blindscan (I hope )
    Fix loading kernel module for rt3070 based WIFI Adapter
    Fix skin to support new Harddisk Manager
    Update Italian translation
    Update enigma2-plugins
    After updating, and reboot, you do mount HDD with new Harddisk Manager!

    Menu->Setup->System->Harddisk
    Up
    Release 099r1


    All updates until 098r6 are included
    Update bootlogo
    Fix crash on Timer function
    Update LED Manager plugin to 0.2
    Re-add epgblacklist on Enigma Experimental (Mode 2)
    Update enigma2-plugins
    Up
    Release 098r6


    All updates until 095r6 are included
    Move to 2.4 version
    Changed bootlogo
    Update dm7020hd dreambox-dvb-modules (20111102)
    Add LED Manager plugin
    Add full new Enigma 3.2 features (Only Using Mode 1)
    Update enigma2-plugins
    Update CrossEPG (Now you do download Rytec Provider)
    You can run this image in two mode:

    Mode 1: Enigma2 3.2


    Blindscan Support (Tuner: BCM4505, BCM4506, Alps BSBE1 C01A/D01A)
    Limited CrossEPG patch
    No LCN Scanner patch
    Full Enigma2 3.2 features
    Mode 2: Enigma2 Experimental


    No Blindscan Support
    Full CrossEPG patch
    LCN Scanner patch
    More Enigma2 binary patch
    After flashing, the image start in Mode 1: Enigma2 3.2
    If you want change Mode, you can choose enigma2 to run via Blue Panel:


    Blue->Yellow->Configure Console/RC/Enigma->Select Enigma Version
    Restart Enigma2
    Up
    Release 095r6 (Latest 2.3 Version)


    Update to InitramFS 1.8, for all Machines (thanks @gutemine)
    Fix some italian translation
    Update Lithuanian Language (Thanks @adga)
    Update sqlite to 3.6.23.1 (dm7020hd)
    Update CCID to 1.4.5
    Update CrossEPG
    Update CrossEPG (mpepg.conf) for Mediaset (Thanks @pappa)
    Add MerlinEPGCenter plugin on Extension
    Add New RC config (Enigma Key Green Swap) Green Key Press = subchannel
    Green Key Press >1s = EPG Manager
    Blu->Yellow->Setup Console/RC to choice RC Map.

    Update enigma2
    Update enigma2-plugins
    Up
    Update to new release Instruction

    This Update work only if you have a Nemesis svn >= 098r6!!!!

    If you have a SVN version < 092, or SSL < 84, follow this:

    Flash SecondStage Loader 84-r0 (nfi version)
    Reboot
    Flash Image SVN 104r4
    Reboot
    If you have a SVN version >= 092, or SSL = 84

    You can directly flash a new 104r4

  8. #8
    Registered kennyboy's Avatar
    Join Date
    Jan 2005
    Posts
    598
    Thanks
    349
    Thanked 64 Times in 49 Posts
    Download Link:
    dm500hd, dm800, dm800se, dm7020hd, dm8000

    NEMESIS 2.6 107r5 Dual Enigma


    Attention read carrefully!
    to do before upgrade to 107r5!!!!



    •Remove all Skins installed from Addons and reboot with de default skin
    the old skins are no more compliant with the 107r5
    •proceed with the upgrade on-line

    Nemesis 2.6 107r5 (On-Line)
    Updated 29.03.2012-13:00



    •All updates until 105r4 are included
    •Rewrite device info panel, now are also displayed the network devices
    •Update dreambox-dvb-modules to 20120328 fot 800se
    •Update dreambox-dvb-modules to 20120322 for 500hd, 7020hd and 8000
    •Update Enigma2 to 3.2.2 (20120327)
    •Move to 2.6 version
    •Added possibility to disable HDD as a device for epg.dat, swap files and skins
    •Added possibility to remove HDD on Picon search path
    •Update CrossEPG to use new Autodiscover EPG (Only for Nemesis Images)
    •Update Bootlogo for version 2.6 (thanks @XPlanet)
    •Replaced the eXcort Lux default skin, with the new Nemesis Black Skin by mmark (thanks @mmark & Stardust)
    •Added possibility to enable/disable Pig Widget on Skin
    Blue->Yellow->Setup Skin->Enable Pig Widget on skin
    •Added developer mode for skinner (Thank's @skaman)
    •Added Suppprt for Skins on external device
    Now you can install skin on, USB/CF/HDD/eSATA devices
    (At the moment 0nly skins without Python code modification)
    •Added Autodiscover Picon
    Discover on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
    •Added Autodiscover swap file
    Discover on: USB/CF/HDD/eSATA devices
    •Added Autodiscover epg.dat file
    Discover on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
    •Added device selection for Picon installation
    You can install Picon on: Flash, USB/CF/HDD/eSATA devices and Network Mountpoint
    •Removed Picon Provider, System e Satellite from image
    Now you can install it from Blue Panel->Addons
    •Updated italian CVS translation using german locale as reference (Thank's @blu8)
    •Updated Nemesis Panel italian translation(Thank's @blu8)
    •Updated full german locale translation (thanks @bigstar2005)
    •Updated enigma2-plugins

    Up
    Nemesis 2.5 105r4
    Updated 23.02.2012-13:30



    •All updates until 104r4 are included
    •Update Kernel
    •Added full german locale translation (thanks @bigstar2005)
    •Added time syncronization via Internet at dreambox boot (OpenVPN improvement)
    •Update dreambox-dvb-modules to 20120216 for all machines
    •Update to InitramFS 2.5 for all machines (thanks @gutemine)
    •Update dreambox-secondstage to 86r0 for dm7020hd
    •Fix crash on manual scan on mode 2
    •Fix enable swap file on reboot
    •Fix load EPG from backup on reboot
    •Fix hang on addons panel on dm800
    •Fix bug on HDD Manager, now network share as hdd replacement is correctly mounted
    •Add preview for Picon and Boologo
    •Small fix on Addons Panel
    •Update enigma2-plugins

    Up
    Nemesis 2.5 Release 104r4
    Updated 14.02.2012-17:30



    •All updates until 103r5 are included
    •Update to InitramFS 2.4, for all Machines (thanks @gutemine)
    •Update dreambox-dvb-modules to 20120213 for all machines
    •Update dreambox-secondstage to 85r0 for dm7020hd
    •Update Enigma2 to 3.2.2 (20120214)
    •Update Kernel
    •Full support for USB-DTT in both mode 1 and 2
    •You can now choose between 3 different Extended InfoBar (Lite, Medium or Full)
    Blue->Yellow->Setup Extended InfoBar OSD->Choice Extended InfoBar type

    •Code optimization on Blue Panel
    •Code optimization on Addons Panel
    •Update enigma2-plugins

    Up
    Release 103r5 (Private Release)
    Updated 03.02.2012-14:00


    •All updates until 102r8 are included
    •Update dreambox-dvb-modules to 20120202 for all machines
    •Update Bootlogo for version 2.5 (thanks @XPlanet)
    •Replaced the old default skin, with the new eXcort luX (thanks @mmark & Stardust)
    •Code optimization on Blue Panel
    •Move to 2.5 version
    •Update enigma2-plugins

    Up
    Release 102r8 (Private Release)


    •All updates until 101r1 are included
    •Update bootlogo
    •Add skin Preview on Addons Panel
    •Update CrossEPG
    •Update to InitramFS 2.2, for all Machines (thanks @gutemine)
    •Update Kernel (add EFI/GPT partition recognition support, enable large block device support)
    •Update PCSC-Lite to 1.8.2
    •Update gst-plugin-good (raise dts, ac3 and aac parse elements' ranks)
    •Update libpagecache (fix occasional program aborts/crashes (e.g. on e2 recording stop))
    •Downgrade plugin bitrateviewer, now work in both mode 1 and 2
    •Update to Webinterface 1.7.1
    •Change Green Button text "Initialize" to "Manage" on HDD Manager Screen
    •Fix Automatic download on StayUp plugin
    •Fix crash on HDD Manager
    •Fix crash on EPG Info Screen when plugin EasyInfo is installed
    •Fix some Italian translation
    •Update enigma2-plugins

    Up
    Release 101r1


    •All updates until 100r8 are included
    •Fixed EPG data loss at the transition between Enigma2 modes
    •Removed unused entry(Backup EPG, Save EPG) on Green Panel in Mode 1
    •Fix CrossEPG on Mode 1 (Enigma2 3.2) on dm7020hd
    •Add possibility to choice demux for CrossEPG
    Blue->Yellow->EPG Configuration->CrossEPG demux

    •Small fix on default Skin

    Up
    Release 100r8 (Private Release)


    •All updates until 099r1 are included
    •Update radio.mvi screen logo
    •Add enable/disable deepstandby function on front power button long press
    Blue->Yellow->Setup Console/RC/Enigma->Enable deepstandby on front power button long press

    •Add new choice "do nothing" on RC 'Action on long powerbutton press'
    •Add Unwanted Reboot Manager
    Blue->Yellow->Setup Console/RC/Enigma->Go to standby after (unwanted) reboot

    •Update skin default
    •Replace HD-Glass-15 skin to old skin default
    •Fix HDD info on Device Status Panel
    •Update Plugin StayUP, Fix load epg on Mode 1
    •Fix Mode 2 on dm7020hd now enigma run in both mode 1 & 2
    •Load EPG in a cache without restart Enigma2 on E2 3.2.1 (Thank's Dr.Best)
    No plugin epgloader need!!!! Plese do not install it!!!!
    If you have epgloader plugin in your box, please remove it, before upgrade
    •Update Linux Kernel (Small fix)
    •Update bootlogo
    •Update dreambox-dvb-modules to 2011109 dm500hd, 800, 800se, 8000
    •Update dreambox-dvb-modules to 2011121 dm7020hd
    •Update Mode 1 enigma2 to 3.2.1
    •Partially rewrited Green Panel (Epg Control Center)
    •Fix crash on Mode 2 on System Info (Yellow and Blue Button)
    •Fix crash on Mode 2 using new setting created by Blindscan (I hope )
    •Fix loading kernel module for rt3070 based WIFI Adapter
    •Fix skin to support new Harddisk Manager
    •Update Italian translation
    •Update enigma2-plugins
    After updating, and reboot, you do mount HDD with new Harddisk Manager!
    •Menu->Setup->System->Harddisk

    Up
    Release 099r1


    •All updates until 098r6 are included
    •Update bootlogo
    •Fix crash on Timer function
    •Update LED Manager plugin to 0.2
    •Re-add epgblacklist on Enigma Experimental (Mode 2)
    •Update enigma2-plugins

    Up
    Release 098r6


    •All updates until 095r6 are included
    •Move to 2.4 version
    •Changed bootlogo
    •Update dm7020hd dreambox-dvb-modules (20111102)
    •Add LED Manager plugin
    •Add full new Enigma 3.2 features (Only Using Mode 1)
    •Update enigma2-plugins
    •Update CrossEPG (Now you do download Rytec Provider)
    You can run this image in two mode:

    Mode 1: Enigma2 3.2

    •Blindscan Support (Tuner: BCM4505, BCM4506, Alps BSBE1 C01A/D01A)
    •Limited CrossEPG patch
    •No LCN Scanner patch
    •Full Enigma2 3.2 features
    Mode 2: Enigma2 Experimental

    •No Blindscan Support
    •Full CrossEPG patch
    •LCN Scanner patch
    •More Enigma2 binary patch
    After flashing, the image start in Mode 1: Enigma2 3.2
    If you want change Mode, you can choose enigma2 to run via Blue Panel:

    •Blue->Yellow->Configure Console/RC/Enigma->Select Enigma Version
    •Restart Enigma2

    Up
    Release 095r6 (Latest 2.3 Version)


    •Update to InitramFS 1.8, for all Machines (thanks @gutemine)
    •Fix some italian translation
    •Update Lithuanian Language (Thanks @adga)
    •Update sqlite to 3.6.23.1 (dm7020hd)
    •Update CCID to 1.4.5
    •Update CrossEPG
    •Update CrossEPG (mpepg.conf) for Mediaset (Thanks @pappa)
    •Add MerlinEPGCenter plugin on Extension
    •Add New RC config (Enigma Key Green Swap)
    Green Key Press = subchannel
    Green Key Press >1s = EPG Manager
    Blu->Yellow->Setup Console/RC to choice RC Map.

    •Update enigma2
    •Update enigma2-plugins

    Up
    Update to new release Instruction

    This Update work only if you have a Nemesis svn >= 098r6!!!!

    If you have a SVN version < 092, or SSL < 84, follow this:
    •Flash SecondStage Loader 84-r0 (nfi version)
    •Reboot
    •Flash Image SVN 104r4
    •Reboot

    If you have a SVN version >= 092, or SSL = 84 •You can directly flash a new 104r4

Similar Threads

  1. about Nemesis 2.2 SVN 073
    By aapaul in forum Dreambox DM8000
    Replies: 12
    Last Post: 10-03-2011, 08:21 PM
  2. EDG-Nemesis 4.1
    By onecard in forum Firmware
    Replies: 1
    Last Post: 10-04-2010, 01:36 PM
  3. Edg-nemesis 4.2
    By tr8. in forum 500/600/9100 series
    Replies: 15
    Last Post: 23-07-2008, 06:18 PM
  4. EDG-Nemesis v.3.2
    By Gone_Fishing in forum 500/600/9100 series
    Replies: 25
    Last Post: 14-12-2007, 01:04 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •