Results 1 to 10 of 10

Thread: Easy enigma2 plugin!!! At last ech!

  1. #1
    V.I.P ManikM's Avatar
    Join Date
    Dec 2004
    Posts
    5,425
    Thanks
    457
    Thanked 703 Times in 450 Posts

    enigma2 INSTALLER plugin!!!

    sorry for the german, but heres a plugin, that u install and run, it modifies your bootloader to include options for booting off USB...a menu is presented after flashing at boot time, use your up and down arrows on your remote to select FLASH (default) or one of the USB ports containing your USB images on mem stick.

    hopefully we'll get some more of u onto E2 now.

    CHEERS!! (the code i used was 0815 when prompted)




    Maxi-Flasher für Single (S) und Twin (T)
    Plugin zum Flashen des Maxi-U-Boot-Loaders inkl. Def-Boot-Args

    Das Plugin
    Der Flasher basiert auf dem HDFreaks Bootloader Flash Plugin.

    Mit diesem Plugin ist es möglich unter der Original Firmware den Bootloader zu flashen ohne Putty und ohne serielles Kabel. Es kann normal wie jedes andere Plugin durch entpacken der RAR in den Stammordner eines USB-Sticks und anstecken diesem an den Receiver installiert werden.

    Nach Start des Plugin erfolgt alles weitere dialog-geführt.
    Aus Sicherheitsgründen wird ein Code abgefragt: 0815
    Zusätzlich kann ein anderes Modell über die Links/Rechts-Tasten ausgewählt werden.

    Bei der Installation werden MAC- und IP-Adresse ermittelt und in der Boot-Umgebung eingetragen. Ebenso ein Flag welches das Vorhandensein einer SATA-Festplatte vermerkt. Falls man eine nachrüstet oder ausbaut muss die Installation wiederholt werden.

    Der Loader
    Der Maxi-U-Boot-Loader erlaubt den Start eines alternativen Images von USB-Medien. Folgende Boot-Args werden gleich mit installiert:
    BA0 - bootet die originale Firmware aus dem Flash
    BA1-4 - bootet vom ersten USB-Medium
    BA5-8 - bootet vom zweiten USB-Medium
    BA9 - bootet in der Manier des HDF AutoBoot-Skripts und macht im Notfall ein Recovery
    Dis Auswahl der BA's erfolgt über die Hoch&Runter-Tasten der Fernbedienung. Standardmäßig wird BA0 gebootet. Man kann durch drücken von ROT einen anderen Eintrag vorwählen.
    Achtung: Vor einem FW-Upgrade muss man wieder auf Flash umstellen, um Fehler bei "UPGRADE APP" zu vermeiden!

    Beim boot von USB BA: 2,3,4;6,7,8 wird zuerst versucht von der ersten Partition (P1) den Linux-Kernel "/uImage<P-Nr>" per fatload zu Laden. Dies geht wesentlich schneller als per ext2load "/boot/uImage", welches im Anschluss aber auch noch versucht wird. Dazu muss P1 mit FAT formatiert sein, die die uImage-Datei kopiert und an diese die Partition-Nummer angefügt werden.

    Ein Hinweis bei 2 USB-Medien
    Die Reihenfolge der USB-Anschlüsse ist beim Twin "1018" Back USB1/sdb und Front USB2/sdc.
    Der einfache Single "1008" hat nur einen USB-Anschluss und man muss probieren ob USB1 oder USB2 funktioniert. Im Fehlerfall dauert es nur wenige Sekunden und das Boot-Menü erscheint wieder. Dann schnell die Alternative auswählen.
    Der erweiterte Single "1008SE" sollte sich ähnlich dem Twin verhalten.

    Die Danksagung
    Tausend Dank an Graham12 für seine wertvolle Unterstützung beim Vorabtest der Flasher.
    Des weitern bedanken ich mich recht herzlich bei SoLaLa für die kostenlose Bereitstellung des Loades und bei Googgi für die liebevolle Modell-Pflege im Wiki.
    Attached Files Attached Files
    Last edited by ManikM; 08-01-2012 at 07:05 PM.

  2. The Following 4 Users Say Thank You to ManikM For This Useful Post:

    fatboy7 (14-01-2012), jacksback (28-08-2012), Midnight R (07-01-2012), paulipm (07-01-2012)

  3. #2
    Senior Member
    Join Date
    Dec 2008
    Posts
    206
    Thanks
    22
    Thanked 8 Times in 6 Posts
    Good find.
    Last edited by Midnight R; 07-01-2012 at 07:00 PM.

  4. #3
    Senior Member
    Join Date
    Feb 2010
    Posts
    153
    Thanks
    60
    Thanked 16 Times in 14 Posts

    google translation

    Flasher for Maxi-Single (S) and twin (T)
    Plugin to flash the maxi-U-boat loader including Def Boot Args

    The plugin
    The flasher is based on the HDFreaks Bootloader Flash plugin.

    With this plugin it is possible to flash the original firmware with the bootloader without Putty and without serial cable. It can be normal like any other plugin by unpacking the RAR to the root folder of a USB stick and plug in this receiver to be installed.

    After starting the plugin takes everything out further dialogue.
    For security reasons, a code is requested: 0815
    In addition, a different model than the left / right buttons are selected.

    During installation, MAC and IP address is determined and entered into the boot environment. Similarly, a flag which indicated the presence of a SATA hard drive. If you have one retrofitted or expanding the installation to be repeated.

    The Loader
    The Maxi-U-Boot Loader allows the start of an alternative images from USB media. The following boot-args to be installed simultaneously with:
    BA0 - the original firmware boots from flash
    BA1-4 - first boot from USB media
    BA5 8 - boot from the second USB device
    BA9 - boots in the style of the HDF autoboot script and making a recovery in an emergency
    BA's selection is the Dis-Down keys on the High and the remote control. By default, BA0 is booted. You can select by pressing RED another entry.
    Caution: Before you have a firmware upgrade switch back to Flash to avoid errors in "APP UPGRADE!"

    When you boot from USB BA: 2,3,4, 6,7,8, first try of the first partition (P1), the Linux kernel "/ uImage <P-Nr>" by fatload to shop. This is much faster than from ext2load "/ boot / uImage", which is in port, but also still trying. This must be formatted with FAT P1, copied the uImage file and append to this the partition number.

    A note on two USB media
    The order of the USB ports is the Twin "1018" Back and Front USB1/sdb USB2/sdc.
    The simple single "1008" has only to try a USB port and works whether you have USB1 or USB2. If an error occurs, it only takes a few seconds and the boot menu appears again. Then quickly choose the alternative.
    The extended single "1008SE" should behave like the Twin.
    Last edited by paulipm; 07-01-2012 at 09:06 PM. Reason: incomplete

  5. The Following User Says Thank You to paulipm For This Useful Post:

    Gaza (11-01-2012)

  6. #4
    Member Gaza's Avatar
    Join Date
    Nov 2009
    Posts
    70
    Thanks
    11
    Thanked 6 Times in 4 Posts
    Has anyone tried this yet

  7. #5
    V.I.P ManikM's Avatar
    Join Date
    Dec 2004
    Posts
    5,425
    Thanks
    457
    Thanked 703 Times in 450 Posts
    yes , i have.

    works good.

  8. #6
    Senior Member
    Join Date
    Feb 2010
    Posts
    153
    Thanks
    60
    Thanked 16 Times in 14 Posts

    PKT E2 boot problem

    reposted in the main section
    Last edited by paulipm; 14-02-2012 at 12:37 AM.

  9. #7
    Member
    Join Date
    Mar 2012
    Posts
    54
    Thanks
    10
    Thanked 6 Times in 5 Posts
    Will this work with S3500HDCCi ?

  10. #8
    Junior Member
    Join Date
    Jan 2009
    Posts
    17
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I have just bought the icecrypt S3500, will this E2 image work on it. If not, in general, will this receiver accept any other image setup? Also, is this receiver the same firmware, plugins etc as an Octagon SF1008?

  11. #9
    Junior Member
    Join Date
    Mar 2012
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by EMKWRX View Post
    I have just bought the icecrypt S3500, will this E2 image work on it. If not, in general, will this receiver accept any other image setup? Also, is this receiver the same firmware, plugins etc as an Octagon SF1008?
    working it on s3500 ??

  12. #10
    Junior Member
    Join Date
    Sep 2012
    Posts
    5
    Thanks
    30
    Thanked 2 Times in 2 Posts
    good afternoon, working it on s3600 ? thanks

Similar Threads

  1. Replies: 6
    Last Post: 24-02-2011, 03:39 PM
  2. Azbox HD Enigma2 - 7day EPG plugin, how?
    By hfmls in forum AzBox HD E2 Newbie Questions
    Replies: 0
    Last Post: 24-10-2010, 10:57 PM
  3. Replies: 0
    Last Post: 09-03-2010, 09:25 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •