WCP:-80
FTP:-21
Telnet:-23
message im getting when im trying to connect "Access violation at address 005ACB5 in module VUCC.exe read of address 00000000
WCP:-80
FTP:-21
Telnet:-23
message im getting when im trying to connect "Access violation at address 005ACB5 in module VUCC.exe read of address 00000000
That's the message I get when I enter the wrong IP address into VuCC.
Click in the IP address field and delete the IP address and close VuCC.
Now reopen VuCC and enter the IP address again then try and connect and see if that cures it.
get an AZBOX mate! proper E2
I don't get that exact error (different address) but I get the same sort of access error with the wrong password or the wrong IP number
I think my router is playing up!going to borrow my mates to try
Are you using windows or what? Even windows has a basic telnet program built in. At least I think all versions do.
Go to the command line and run telnet
Then type
open IP number
Obviously insert the right IP number in after open.
This should show if you can connect to the box.
i can connect to the box with DCCC using the same ip the VUCCC wont connect,tested my connections all showing ok
You say DCC works but you can't telnet the box to change the password ?
Can you also clarify that the box has a fixed IP address ?
Try enabling DHCP and reboot the receiver so a new IP address is assigned to the receiver.
If telnet isn't connecting to your receiver using DCC then you've got a network issue.
Ok thanks for all your help iv'e now deleated the latest version of the vucc,and reinstalled version 3 and all is working i can now connect to my stb,everything is working smoothly now!
Can I join in this discussion please. I have been able to use VUCC with no problems until today. I can conect to my box and can upload catseyes. However FTP will not work. I have entered the IP address, user name: root, password:Blank; WebControl Port: 80, FTP Port:21, Telnet Port: 23. I have FileZilla running. If I put in the IP address in FileZilla Host and root in the username I can get access to my box so I tried to send the Cccam file to the etc file. The transfer went OK but I had to edit the Permissions and set the Attributes to 755. The problem is NO Cccam showing installed in the box. If anyone can tell me how to get VUcc and FileZilla to talk to one another it would be a big help and I can then install the Cccam using VUCC. I am using the latest Blackhole Image. The box is running free to view programmes with no problems.
In Black Hole you need to manually install the Cams, prior to editing the CCcam.cfg file.
You do this using FileZilla, first download the cams you wish to use, if using one of the latest Black Hole images, 2.11 - 2.14, stick with CCcam 230:
https://www.satpimps.co.uk/showthrea...s-(2013)-(2014)
Download this, plus any other cams, you want to install, then place the unzipped file on your computer desktop, to make it easier to find. So you end up with a file:
enigma2-plugin-cams-cccam_2.3.0_mips32el.ipk
You then start up FileZilla, and connect to your receiver, then transfer this file into the tmp folder.
Next go to your receiver, press the green button, followed by the yellow button, and select manually install ipk packages.
Let this run, it takes a little time.
Once installed activate your cam, by pressing the Blue button and use the < > buttons and the OK to select Cam 2.30.
Now go back to Filezilla, on your PC, and go to the var folder, and etc sub folder.
In the bottom right pane scroll down and locate the CCcam.cfg file. Right click on this and click on the view/edit option.
Now select all the text, in the file, delete it, copy/paste in your lines, then save the file.
You can find this information in the VU+ help section, just check out Lee's, from Goldwafers, Guides.
Thanks Mickha. Cccam is now working fine. Now regarding the other bit of my question. As I said I have been able to use VUCC without any issues until yesterday. VUCC connects to my box ok but when I press FTP nothing happens. I can connect FileFilla to my box Ok (I have just used it to activate my Cccam) but I can not get FileFilla to work with VUCC. ANY ideas? I have deleated both and downloaded and run the latest files.
I'm not sure I understand your post, FileZilla is the FTP program that VUCC runs, all that happens when you click on FTP is that FileZilla opens.
When I press the FTP button in VUCC nothing happens...it does not open Filefilla. The way I loaded the Cccam this morning was to open FileFilla, without using VUCC, putting in my IP address and username and connect to my receiver. It worked fine but I would like to be able to use VUCC, it makes thing so simple. So my question is how do I get VUCC to run FileFilla when I press the FTP button?
Try downloading VUCC 08 again, although as I uise FileZilla, more than the VUCC, I find it easier to have Filezilla downloaded, and run, separately from VUCC.
You could also check your anti virus software, and temporarily disable any spyware, pop up blocking software.
its probably a fault with your windows os (you never said what version you were using)
it may be something needs installing like netframework or some other MS product ?
vucc0.8 works fine on my win8 laptop, also ok on my win7 laptop too
once I connected to the linux box using the correct name, password and ip address, all the options stopped being ghosted out, click ftp and filezilla opened ok (then wanted me to update it)
so I would think its a fault with your windows os, so try it on a different pc or laptop, to double check
Thanks Mickha and echelon. I did as advised and deleted both VUCC and Filefilla and then reinstalled VUCC. All is well again apart from the fact that when FileFilla is opened it keeps telling there is a new update even though I have installed the latest version. Still that is no great problem. Thanks again to you both.
Bookmarks