Page 1 of 2 12 LastLast
Results 1 to 20 of 23

Thread: Has my wireless gone dead?

  1. #1
    V.I.P beamobhoy's Avatar
    Join Date
    Jul 2009
    Posts
    360
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Has my wireless gone dead?

    Just flashed to new Spaze 2.0 and until then i was connecting wirelessly with RTi 1.3 - after flashing to new Spaze, the wireless module seems to of died. Signal strength is -121 dBm and encryption states Unsupported. Has anyone else had this and could anyone confirm if it is the module that has died.

  2. #2
    Member Fieltshop's Avatar
    Join Date
    Jul 2011
    Posts
    65
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Its a known bug in this Image, they are working on it.

  3. #3
    V.I.P beamobhoy's Avatar
    Join Date
    Jul 2009
    Posts
    360
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hi there Enzofielt!! Was worried that my box had turned into an unwanted FTA box - but hopefully the team will come up with a quick answer.

  4. #4
    V.I.P beamobhoy's Avatar
    Join Date
    Jul 2009
    Posts
    360
    Thanks
    0
    Thanked 0 Times in 0 Posts
    One question though Enzofielt, how come other users are not affected by this - only me??!

  5. #5
    Member Fieltshop's Avatar
    Join Date
    Jul 2011
    Posts
    65
    Thanks
    0
    Thanked 0 Times in 0 Posts
    For sure you are not the only one, i send your crashlog to Spaze. I hope they find something to get this fixed also.
    I gues you have tryed a reflash also, maybe something went bad the first time.
    Most of time these are driver problems, from my experiance with the azbox is that every new install can fix problem or create problems.

  6. #6
    V.I.P beamobhoy's Avatar
    Join Date
    Jul 2009
    Posts
    360
    Thanks
    0
    Thanked 0 Times in 0 Posts
    it certainly has created a problem, i just flashed back to RTi 1.3 where the wireless worked pre-Spaze 2.0 but now it doesn't work. how can i get this module to work? can you point me to a place where i can download previous wireless module so i can watch some tv tonight?

  7. #7
    Senior Member Ceaser's Avatar
    Join Date
    Jan 2010
    Posts
    113
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Try rebooting the box a couple of times, after first install I could not not get the wi-fi working , rebooted router then box . After the second reboot I had Wi-fi.

    Azbox premium, encryption wpa

  8. #8
    V.I.P beamobhoy's Avatar
    Join Date
    Jul 2009
    Posts
    360
    Thanks
    0
    Thanked 0 Times in 0 Posts
    thanks Ceaser, tried all that - even reflashed a couple of times - still no wifi!

  9. #9
    Member
    Join Date
    Dec 2010
    Posts
    61
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hello friends

    wireless work fine, no problem in spaze 2.0.
    i have wap enription and just put my key network et voila, try it maybe flash again with spaze 2.0.

    cheers

    mx700

  10. #10
    V.I.P beamobhoy's Avatar
    Join Date
    Jul 2009
    Posts
    360
    Thanks
    0
    Thanked 0 Times in 0 Posts
    just reflashed (again) nothing! Got to be the box if everyone else is working...............is there any other way of testing?

  11. #11
    Senior Member Ceaser's Avatar
    Join Date
    Jan 2010
    Posts
    113
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Have you tried installing using jazup 2.3 ?

  12. #12
    V.I.P beamobhoy's Avatar
    Join Date
    Jul 2009
    Posts
    360
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Will try jazup 2.3 today when the kids have gone to school!! Interestingly, went back to Spaze 1.0 late last night and wireless is now working! At least it's not my box - i won't have to throw it!

    Never tried jazup - will download and look at it - is it as simple as azup?

  13. #13
    Member Hectore's Avatar
    Join Date
    Mar 2009
    Location
    Belgium
    Posts
    97
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hello,

    To use JaZup remove "ext4" option before flash !

    Regards.

  14. #14
    V.I.P beamobhoy's Avatar
    Join Date
    Jul 2009
    Posts
    360
    Thanks
    0
    Thanked 0 Times in 0 Posts
    thanks, tried with jazup 2.3 and still no wireless - just need the spaze team to come up with a decent wireless module that works for everyone!

  15. #15
    Junior Member
    Join Date
    Jun 2010
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    just to give my experience. Came up with the same problem. no wifi -121 and encryption unsupported. changed encryption on router, channel, removed encryption nothing.
    Finally what worked was this:
    1. Shutdown azbox premium HD while I was in the wireless network configuration
    2. Enabled Wired interface (was disabled).
    3. Made default wireless.
    Voila Wifi was up again.

  16. #16
    V.I.P beamobhoy's Avatar
    Join Date
    Jul 2009
    Posts
    360
    Thanks
    0
    Thanked 0 Times in 0 Posts
    thanks maggel - trying that now!

  17. #17
    V.I.P beamobhoy's Avatar
    Join Date
    Jul 2009
    Posts
    360
    Thanks
    0
    Thanked 0 Times in 0 Posts
    maggel - you're a genius! Unplugged power lead from azbox whilst on the wireless config - then heyho wireless came back. Now why didn't the Spaze team come up with this fix?? well done mate, wish i could buy you a drink!

  18. #18
    V.I.P zeini's Avatar
    Join Date
    Dec 2008
    Location
    Austria
    Posts
    455
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by maggel View Post
    just to give my experience. Came up with the same problem. no wifi -121 and encryption unsupported. changed encryption on router, channel, removed encryption nothing.
    Finally what worked was this:
    1. Shutdown azbox premium HD while I was in the wireless network configuration
    2. Enabled Wired interface (was disabled).
    3. Made default wireless.
    Voila Wifi was up again.
    In Spaze 2.0.0 I can not wake uo WIFI with his tutorial.:001_07:

  19. #19
    V.I.P beamobhoy's Avatar
    Join Date
    Jul 2009
    Posts
    360
    Thanks
    0
    Thanked 0 Times in 0 Posts
    zeini - it took me half an hour before it worked! unplug all power sources (including ext hdd if you have one - mine was a powered ext hdd) when on the wireless configuration screen. Plug back in, go back to wireless configuration and scan your wireless router - hey presto it should work!

  20. #20
    Junior Member
    Join Date
    Jun 2010
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by beamobhoy View Post
    maggel - you're a genius! Unplugged power lead from azbox whilst on the wireless config - then heyho wireless came back. Now why didn't the Spaze team come up with this fix?? well done mate, wish i could buy you a drink!
    Glad it helped you too. Its good to share succesfull actions soas to help others find easier solutions with our Aztrouble....
    Got to mention that this image is very well done apart from these hicups so cudos to Spaze. Especially the media center is modded with a few very welcome goodies.

Page 1 of 2 12 LastLast

Similar Threads

  1. i have a dead sat nav
    By cairnsy in forum TomTom GO
    Replies: 1
    Last Post: 05-07-2009, 10:01 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •