Results 1 to 14 of 14

Thread: LNB for 1M Lenson Heath - Ideas?

  1. #1
    Cool Dude stevethejack's Avatar
    Join Date
    Jan 2005
    Posts
    277
    Thanks
    65
    Thanked 180 Times in 88 Posts

    LNB for 1M Lenson Heath - Ideas?

    Got myself a VU+ Duo. Wanted to put a quad LNB on the 1M Lenson Heath dish (I don't think its offset). Do you guys have any recommendations?

    Also is there a great difference in getting a twin rather than a quad LNB for it?

    Would the ICECRYPT 0.1db Universal Quad Output LNB from the board sponsors do the job?

    Thanks
    Steve
    Last edited by stevethejack; 17-07-2011 at 07:00 PM.

  2.    Advert



  3. #2
    V.I.P
    Join Date
    Feb 2005
    Posts
    2,214
    Thanks
    61
    Thanked 150 Times in 123 Posts
    depends how many ports you need all lnbs are ok for the dish offset is the norm but if you have a centre feed prime focus you may need a c120 type there are loads of different makes on the market and most equal in noise and quality

  4. #3
    V.I.P
    Join Date
    Jul 2006
    Posts
    1,325
    Thanks
    655
    Thanked 1,453 Times in 672 Posts
    1M Lenson Heath takes any 40mm lnb

    i have one



    Quote Originally Posted by stevethejack View Post

    Would the ICECRYPT 0.1db Universal Quad Output LNB from the board sponsors do the job?
    yes

  5. The Following User Says Thank You to ozzsurf For This Useful Post:

    stevethejack (14-02-2017)

  6. #4
    Cool Dude stevethejack's Avatar
    Join Date
    Jan 2005
    Posts
    277
    Thanks
    65
    Thanked 180 Times in 88 Posts
    Thanks for the advice, looks like the icecrypt one for me. Should be pretty good being 0.1db

  7. #5
    Cool Dude stevethejack's Avatar
    Join Date
    Jan 2005
    Posts
    277
    Thanks
    65
    Thanked 180 Times in 88 Posts
    I ended up getting this http://www.goldwafers.com/cart/ICECR...-Quad-LNB.html however this was 5 and a half years ago. Do you think it needs replacing. I need a few more % out of my dish to have a stable picture on the Tandberg Premier League Saturday 3pm feeds on 11020 V at 7e. Do you think the Inverto Black Ultra HGLN Quad LNB (0.1 db) would give me that extra few % I need? Well worth the 22 if it does the job. Thanks

    BTW - now I also have a Vu Duo2 and a TM 5402 HD M3 that gives me the Tandberg feeds.
    Last edited by stevethejack; 14-02-2017 at 08:55 PM.

  8. #6
    Cool Dude
    Join Date
    Jan 2005
    Posts
    132
    Thanks
    60
    Thanked 31 Times in 23 Posts
    My Inverto Black Ultra (duo) which is about 5 years old performs much better than any other LNB I have owned.

  9. The Following User Says Thank You to philips For This Useful Post:

    stevethejack (14-02-2017)

  10. #7
    In the beeches
    Join Date
    Dec 2004
    Posts
    825
    Thanks
    212
    Thanked 195 Times in 140 Posts
    I get good results with an OPTICUM Quad LNB LQP-04H - about the same price as the Inverto Quad.

    Bought in summer 2016.

  11. The Following User Says Thank You to Burnham For This Useful Post:

    stevethejack (14-02-2017)

  12. #8
    Cool Dude Mobley2's Avatar
    Join Date
    Apr 2013
    Posts
    149
    Thanks
    95
    Thanked 125 Times in 82 Posts
    Quote Originally Posted by stevethejack View Post
    I ended up getting this http://www.goldwafers.com/cart/ICECR...-Quad-LNB.html however this was 5 and a half years ago. Do you think it needs replacing. I need a few more % out of my dish to have a stable picture on the Tandberg Premier League Saturday 3pm feeds on 11020 V at 7e. Do you think the Inverto Black Ultra HGLN Quad LNB (0.1 db) would give me that extra few % I need? Well worth the 22 if it does the job. Thanks

    BTW - now I also have a Vu Duo2 and a TM 5402 HD M3 that gives me the Tandberg feeds.
    Have you tried adjusting the focus of the Lnb, before you spend any money, you may gain a little more. Some Lnbs work better when pulled hard back against the mount,
    certainly that is the way my Inverto works on my 1Mtr Dish, other Lnbs I have used over the years, have worked best when moved forward towards the dish. It's all about
    illuminating the surface of the dish, too far forward and you do not cover the full surface, too far back and you get spill over on the edges, resulting in extra noise.
    If you do go ahead and buy the Inverto Black Ultra, you will not be disappointed.

    regards mobley2

  13. The Following 4 Users Say Thank You to Mobley2 For This Useful Post:

    dog-man (15-02-2017), JOE.MADDISON (15-02-2017), simon 2003 (15-02-2017), stevethejack (15-02-2017)

  14. #9
    V.I.P ABA's Avatar
    Join Date
    Dec 2004
    Posts
    505
    Thanks
    10
    Thanked 103 Times in 40 Posts
    think its time you went for a bigger dish now
    say 1.2

  15. The Following User Says Thank You to ABA For This Useful Post:

    stevethejack (15-02-2017)

  16. #10
    Cool Dude stevethejack's Avatar
    Join Date
    Jan 2005
    Posts
    277
    Thanks
    65
    Thanked 180 Times in 88 Posts
    Quote Originally Posted by ABA View Post
    think its time you went for a bigger dish now
    say 1.2
    Getting info and prices on a Gibertini 1.25m right now.

  17. #11
    Cool Dude simon 2003's Avatar
    Join Date
    Dec 2004
    Posts
    3,136
    Thanks
    931
    Thanked 705 Times in 396 Posts
    about 150 mate ,im looking at one aswell but they seem very heavy and i wanted it on a techno diseqc motor

  18. #12
    Cool Dude stevethejack's Avatar
    Join Date
    Jan 2005
    Posts
    277
    Thanks
    65
    Thanked 180 Times in 88 Posts
    27kg - looking at putting it on a low wall - less distance to fall on someone's head, and easy to maintain.

  19. #13
    Cool Dude simon 2003's Avatar
    Join Date
    Dec 2004
    Posts
    3,136
    Thanks
    931
    Thanked 705 Times in 396 Posts
    yes thats crazy i saw that figure thats with an aluminium dish face as well which i think is 4kg ,its the mount thats the weight ,

  20. #14
    Cool Dude stevethejack's Avatar
    Join Date
    Jan 2005
    Posts
    277
    Thanks
    65
    Thanked 180 Times in 88 Posts
    Quote Originally Posted by stevethejack View Post
    Getting info and prices on a Gibertini 1.25m right now.
    OP125 = 150
    Polar Mount = 48
    18 inch Jack Arm = 56.68
    Gibertini matched C120 Feed horn = 26.40
    Invacom C120 Quad = 60
    Inverto C120 Quad = 25.20
    V Box = 51.60
    HH120 = 70.80 << this item is on offer until end February 2017 normally 85
    Heavy duty 4 Core Motor cable 1.80 (all four cores individually screened)
    40M roll CT100 Cable (very low loss cable) 12.50
    75mm L Bracket with 550mm standoff = 37.52

    from that looking at:

    Gibertini OP125 150.00
    Polar Mount 48.00
    Gibertini matched C120 Feed Horn 26.40
    Invacom C120 Quad 60.00
    Motor cable 1.80

    Have cables and Jaeger QARL3618+ Superjack 18” Motor Jack Arm from the Lenson Heath dish & Superjack V Box 2, so a decent price to upgrade.

Similar Threads

  1. Insatalling a LNB monoblock???
    By dude66 in forum LNB Discussions
    Replies: 15
    Last Post: 11-01-2008, 12:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •