New Gemini3 Image for Azbox

[Micha77]

Anyone else having problems to download plugins list?
I go into Plugins in the menu and press Red button (Manage Extension)
After that it is trying to download the list and if I let it be for 10 min it is still trying to download the list.

I've checked all network settings and it's all fine.

Any suggestions?
I'm trying to get cccam installed and to work.

[enzian96]

You have a plugin list in the blue panel , then you press ADDONS and wait.
After 15-30 sec the list will be loaded.

When you have installed this image is cccam directly active in run mode.
Use cccam info to see it, when you use the camd maneger then comming the green screen.

regards Olaf

[Micha77]

You have a plugin list in the blue panel , then you press ADDONS and wait.
After 15-30 sec the list will be loaded.

When you have installed this image is cccam directly active in run mode.
Use cccam info to see it, when you use the camd maneger then comming the green screen.

regards Olaf

Yes I know that, but the problem is thta I don't get the any list even after waiting 10 minutes.

[ceyar]

We are waiting for a new release with 1.0fix base

[Egyptian11]

We are waiting for a new release with 1.0fix base

Most coplete image ever
It has include lot of plugins
VTI Panel is for managing emus
CCcam INSIDE
JUST PUT card
and HAVE PHUN !
Based on RTi1.0

[ceyar]

Egyptian11, i know that current release is based on RTi1.0, i was expecting a new release GP3 based on RTi1.0 + fix release and not only RTi1.0, please see official RTI forum for what fixes are included

[Egyptian11]

Egyptian11, i know that current release is based on RTi1.0, i was expecting a new release GP3 based on RTi1.0 + fix release and not only RTi1.0, please see official RTI forum for what fixes are included

Ok ceyar
I understand you

[Ceaser]

How do I get this image to recognise my usb stick. I am wanting to watch a film from it but can't find out how to do so.

[boko2525]

How do I get this image to recognise my usb stick. I am wanting to watch a film from it but can't find out how to do so.

you should go to this order
pick media center, then pick media and finally usb.
Have fun

[Ceaser]

When I go to ' Media centre ' > ' My Videos ' > USB, none of the films are dispayed. Do I have to create a folder with a particlur name om the USb stick and place the films inside.

With original firmware the films were recognised straight from the USB stick.

[digihoe]

Does your USB stick have more than one partition?
Does it come up as several drives when plugged into a PC?

If so you would need to change autofstab and fstab to include more search paths and maybe make some dirs that they can redirect to. I have my box setup to look for sda1, sda2, sdb1, sdb2 and sdb3 pointing to /media/usb, /media/usb1, /media/usb2, /media/usb3 and /media/usb4.
If you don't want to do that make sure you format the stick to only contain one partition (FAT32/NTFS/EXT3) and it will turn up in /media/usb

Do you have an USB harddrive connected also?

Best regards!

[Blagi]

Can we see your fstab, please?

[digihoe]

Can we see your fstab, please?

Sure!

rootfs               /                    auto       defaults,errors=remount-ro,data=writeback,noatime,nodiratime,nobh,commit=1     0     1
proc                 /proc                proc       defaults              0 0
devpts               /dev/pts             auto       mode=0620,gid=5       0 0
usbfs                /proc/bus/usb        usbfs      defaults              0 0
tmpfs                /var                 tmpfs      defaults              0 0
tmpfs                /tmp                 tmpfs      defaults              0 0
/dev/hda2            swap                 swap       defaults              0 0
/dev/hda5            /media/cf            auto       defaults              0 0
/dev/hdb1            /media/hdd           auto       defaults              0 0
/dev/sda1            /media/usb           auto       defaults              0 0
/dev/sda2            /media/usb1           auto       defaults              0 0
/dev/sda3            /media/usb2           auto       defaults              0 0
/dev/sdb1            /media/usb3           auto       defaults              0 0
/dev/sdb2            /media/usb4           auto       defaults              0 0

You need to make the dirs /media/usb* after you change your /etc/fstab file

telnet
mkdir /media/usb*

[Blagi]

Thanx! Appreciated!

Could you describe a bit and then explain, in a few words?

Cheers!

[Ceaser]

Does your USB stick have more than one partition?
Does it come up as several drives when plugged into a PC?

If so you would need to change autofstab and fstab to include more search paths and maybe make some dirs that they can redirect to. I have my box setup to look for sda1, sda2, sdb1, sdb2 and sdb3 pointing to /media/usb, /media/usb1, /media/usb2, /media/usb3 and /media/usb4.
If you don't want to do that make sure you format the stick to only contain one partition (FAT32/NTFS/EXT3) and it will turn up in /media/usb

Do you have an USB harddrive connected also?

Best regards!

Re-formatted my USB stick to FAT32. When I try to read it , it shows up in media > USB ok but thats it, still can't view contents placed on usb stick.

What i get is media>usb>usr>lib>opkg>info and thats it .

Where am I going wrong ?

[Ceaser]

Anybody ???