RTi Core v1.0

**Blagi** · 29-05-2011, 10:32 PM

What is new ?

- Card Reader OK

- New MediaCenter OK ( Menu -> Media Center, choose My Videos and wait 10-15 seconds to re-initialize HDMI!!!, for subtitles *.SRT press red button or SUB-T on RCU, they need to be named same as movie )

- Audio BUG Fixed

- A lot of other bugs fixed and so on.

- Time for zap - reduced

- VOL +/- Fixed

- MUTE(when change ch.) - Fixed

- Lost data when power off/on - Fixed

- Problem with relaod ch.list - Fixed

- Problem with external messages - Fixed

- New/rewritten WebIf

- NEW driver for RemoteControl - work like a charm

- New way for go to rescue mode - press and hold VOL+ button (from front panel or RemoteControl) during AZBox booting

- Removed DOM to be listed as HDD in Enigma2 Info, and now DOM is excluded from standby so COGs will show less.

In Media Center we know that Seeking is not working and VOL UP and DOWN, so please do not report this as BUG, it will be fixed in next release!

Link will apparently be available soon... They are working on it...

**hfmls** · 30-05-2011, 12:13 AM

http://www.filesonic.com/file/108899...i_Core_1.0.rar

**MickeySa** · 30-05-2011, 01:00 AM

Valid link is :

http://www.filesonic.com/file/108899...i_Core_1.0.rar

And please USE JUST THIS LINK, as we noticed also FAKE E2 for AzBox HD.

**Hectore** · 30-05-2011, 08:13 AM

Hello;

RTI V1.0 can be installed with Jazup 2.2.
That's work... :respect-048:

Regards.
Hectore

**Vasco** · 30-05-2011, 04:58 PM

Originally Posted by Hectore

Hello;

RTI V1.0 can be installed with Jazup 2.2.
That's work... :respect-048:

Regards.
Hectore

Hello Hectore,

I could install this version with Jazup 2.2. with success.
Now I would like to go back to official FW.s
I tried but without success.
Is it possible with Jazup 2.2 ?

Thanks by advance

**iwols** · 30-05-2011, 05:32 PM

hi guys long time since i had my azbox switched on is this the rc13 that people are talking about and is it any better than the original fw

**Hectore** · 30-05-2011, 11:20 PM

Originally Posted by Vasco

Hello Hectore,

I could install this version with Jazup 2.2. with success.
Now I would like to go back to official FW.s
I tried but without success.
Is it possible with Jazup 2.2 ?

Thanks by advance

Hello,

Yes, you put your azbox in rescue mode.
You put a orignal firmware on your usb stick pluged in your azbox
After you flash the original kernel with jazup2.2.

Regards.

**andy2005** · 31-05-2011, 06:48 AM

Installed the RC1 --> Nice image. However, I am not yet able to connect wifi to the router with WPA2.

Anybody experiences the same issue ?
:117:

**valerie** · 30-05-2011, 07:06 PM

Originally Posted by Hectore

Hello;

RTI V1.0 can be installed with Jazup 2.2.
That's work... :respect-048:

Regards.
Hectore

With jazup 2.2
is beter,i mean for format with azup 2.0.7 he dont do format
thanks a lot

**beamobhoy** · 30-05-2011, 08:31 AM

Lads, this download site is p#ssing me off, nearly one hour so far and everytime i get to 0 seconds to download, it goes back to 13 mins. Can someone please upload this file to this thread??

Thanks

**SatSearcher** · 30-05-2011, 08:49 AM

A different link would be nice, Filesonic is great if you have an account, but it's almost impossible to d/l from as a free user, just keep getting told i can only d/l 1 file at a time, even though i'm not downloading anything!

**beamobhoy** · 30-05-2011, 09:02 AM

Just found this and it works!!

http://www.megaupload.com/?d=HC1AREHO

**valerica** · 30-05-2011, 09:12 AM

Here's another downl. link :

Code:

http://www.easy-share.com/1915756064/RTi_Core_1.0.rar

Cheers ,
Val .

**naveh** · 30-05-2011, 09:29 AM

another mirror:
http://www.megaupload.com/?d=S63ELOZU

**tx0** · 30-05-2011, 01:10 PM

S*y card is not working with this cardreader driver

PHP Code:


2011/05/30 16:05:06   2156 r02 card detected

2011/05/30 16:05:12   2156 r02 ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02 

2011/05/30 16:05:13   2156 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz

2011/05/30 16:05:14   2156 r02 [videoguard2-reader] in videoguard2_card_init

2011/05/30 16:05:14   2156 r02 [videoguard2-reader] type: VideoGuard BSkyB (0963), baseyear: 1997

2011/05/30 16:05:15   2156 r02 card system not supported

2011/05/30 16:05:15   2156 r02 Normal mode failed, reverting to Deprecated Mode

2011/05/30 16:05:18   2156 r02 ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02 

2011/05/30 16:05:19   2156 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz

2011/05/30 16:05:20   2156 r02 [videoguard2-reader] in videoguard2_card_init

2011/05/30 16:05:20   2156 r02 [videoguard2-reader] type: VideoGuard BSkyB (0963), baseyear: 1997

2011/05/30 16:05:22   2156 r02 card system not supported

2011/05/30 16:05:22   2156 r02 card initializing error

**simon30000** · 30-05-2011, 04:18 PM

same error here as tx0 i tested 2 emu osc#m initializing error.. also ccc#m card init fail ..uk card..

**the illuminati** · 30-05-2011, 05:45 PM

guys i have a problem ...
every time i reboot i go back to factory settings . have to re configure everything al over again . it is getting on my nerves.
also another thing i have 2 configs for sats as i have a 180cm motorized dish and a fixed 60cm dish on a fixed pos. lnb 1 is diseq 1.2 and lnb 2 is diseq 1.0 port ab everything was working ok on RC4 on this one no joy .when i swich between them i loose signal have to reboot but the i loose everthing .have to reconfigre everything
going back to RC4

**Blagi** · 31-05-2011, 04:34 PM

Originally Posted by the illuminati

guys i have a problem ...
every time i reboot i go back to factory settings . have to re configure everything al over again . it is getting on my nerves.
also another thing i have 2 configs for sats as i have a 180cm motorized dish and a fixed 60cm dish on a fixed pos. lnb 1 is diseq 1.2 and lnb 2 is diseq 1.0 port ab everything was working ok on RC4 on this one no joy .when i swich between them i loose signal have to reboot but the i loose everthing .have to reconfigre everything
going back to RC4

Join the club. I went back to OFW. But there is good movement this time. A good beta version, I think. If they sort out the bugs - nice...

Hectore, telesat claims that JAZUp 2.2 doesn't work, that it throws mistakes. Is he correct in saying that? The format hasn't changes since the last time, I think.

Let's all keep on hoping...

**Hectore** · 01-06-2011, 09:09 AM

Originally Posted by Blagi

Hectore, telesat claims that JAZUp 2.2 doesn't work, that it throws mistakes. Is he correct in saying that? The format hasn't changes since the last time, I think.

Telesat is jealous of success and stability of Jazup, that's all...
When you install with azup v2.07, your dom is at 88% of use.
When you install with Jazup 2.2, your dom is at 17% of use !

Search the mistake...

Regards.