CCcam / ET9000

**andrew** · 23-01-2011, 08:35 AM

morning guys

anyone help with this

got a ET9000 with blackhole image and installed cccam. how and where do i install the softcam files and how do i get the cccam to look at them ?

**kegnkiwi** · 23-01-2011, 09:02 AM

If its running an enigma 2 image then it should be just like all other box's. FTP into the box using dcc or that clarktec version and put the softcam files in usr/keys and usr/scce. Cccam should do the rest from there.

ki

**andrew** · 23-01-2011, 09:16 AM

hi

tried that couldnt get the softcam files to work any ideas ? i used the techsat ctechmaker. is the files to be in a specific format ?

**andrew** · 23-01-2011, 09:17 AM

also the softcam option is not showing in the menus ?

**swiffer** · 23-01-2011, 10:17 AM

you can also install the openPli image and dowload all you need from their feed. It is very simple and it works fine for me

**andrew** · 23-01-2011, 10:29 AM

would this still not be the same problem for me with the soft cam files ?

***sonic1*** · 23-01-2011, 10:32 AM

You must use the latest drivers which have addressed some of the card reading issues.

**andrew** · 23-01-2011, 11:46 AM

can anyone tell me how to update the softcam key files on the cccam ? im not connected to a server but can update my reciever via ftp

***hda5*** · 23-01-2011, 01:09 PM

Remember to always restart CCcam after uploading new keys.

First download the latest Satan keybundle from HERE

Upload the satan.tar.bz2 file to the /tmp folder on ET9000.

Open up a Telnet window and type the following exactly how I've written it below (case sensitive)

cd /tmp
tar -xjf satan.tar.bz2 -C /
exit

Now Press Blue Button on ET9000 Remote then select CCcam using the < or > buttons on remote then press OK to restart.

To edit keys use a text editor of your choise to edit the SoftCam.Key file.
Reupload your edited SoftCam.Key file to /var/keys folder on ET9000 then restart CCcam.

Tools for the job
ET9000 Control Centre
Notepad++ _http://notepad-plus-plus.org/