@t Giga
Would sssp be able to set up cccam and or newdcam.? running cccam program over your computer.
Just wonderring for my old tm6900hdcombo nonsuper
@t Giga
Would sssp be able to set up cccam and or newdcam.? running cccam program over your computer.
Just wonderring for my old tm6900hdcombo nonsuper
Are you Folks using Super Series ? And what version of Windows ?
On TM-5400 CI + USB Super
If Patch is not installed correctly to reciever "NO SSSP Option" will be viewable..
If this is not viewable No Communications can be properly set-up with computer.
With latest patch installed it should look like this in 5400
"System Information"
Model : TM5400 CI+Super
S/W Versiion : 1.41p (Aug 18 2010)
H/W verion : 1.10
Boot Version : 2:00 (08:50)
CH version : FEB:09
Once it look like this TM is ready to connect to your P.C.
If no Communications Check Cables/USB Serial port, System Manager in Windows and set to COM 1.
Any Chance of confirming what your tm says in sys info ?Originally Posted by standarren
You need to narrow it down a little more for me as I am Old and Crinkly And Giga is ten times faster than the rest of us.....:sifone: Am sure he can get to the answer if you can confirm what stage you are actually @ No Offence, One small piece of lost info ruins everything when it comes to getting Your PC to Talk with your TM.......
When there's a lot of hardware floating around the bits in-between usually catch us out...... Speaking for myself as a recent Tm Blow in
@thijs
all info is there: bridging CCCAM to Serial <= click here
Last edited by Giga; 14-10-2010 at 08:12 AM.
as I don't have the TM-5400 CI it is hard to figure out what is going on
current patches in 1000 and 6000 have SSSP option
In 6000 series this is enabled by setting Serial Mode to SSSP
In 1000 this working by simply switching channel (as far as I know)
If you test channel list download with Clarke Tech Studio <= click here
then you know serial communication is OK, if this is OK and you run Fausto with an enabled SSSP receiver then you should see data in Fausto [Serial] window.
The information that I can't find or confirm:
Do you need to enable somewhere SSSP on TM-5400 CI and where.
SSSP/RS232 Options in TM after Patch Installed !
Hope these photos help Folk's
First of all make sure the patch has been successfully sent to the TM using usb key. The Box will automatically reboot after patch has been installed..
Now go into TM menu using remote control and select System information.
********************************* **********************
if "Cass" and "Biss" option appear underneath information then Patch IS Installed.
If not Press "2004" on remote control to Enable/Activate Patch...
********************************* **********************
Once this is displayed Exit Back out to "Main Menu" and Down at the Bottom Right hand side of the Screen you will see and extra tab called "Options".
This is where the SSSP/RS232 options are. But as mentioned above These are not visible unless patch has been installed correctly.....
Hope these photos explain what I mean.......
Last edited by Plessy; 07-12-2010 at 11:13 PM.
thanks for that mate i have followed that procedure before everything is as it should be on my tm5400 exactly as yours is but cannot connect for some reason
?
What Operating System are your using ?
windows 7
Damm it !
I thought you would say that !!!
Have no problems here M8 with XP Pro SP3....
You most likely have all the hardware setup correctly, but Finstones 7 handles hardware and interupts differently to XP...
Unfortunately I never used Vista or 7 cause excuse my French ! but they are Crap O.S's ......
I remember reading somewhere in the technomate threads relating to a similar issue with Windows seven so I am afraid you will have to USE the Search Button and do a bit of reading......
If you have an old computer lying around preferably real Old with Printer port, serial port etc, etc sticking out the back ,,, this may be easier than what you are currently using.......
Make sure System Device manager Ports and Comms and Com Port is Set to Com 1.....
Even if it says it IS AT COM 1 Change it again reboot in Safe mode to confirm.......
Other than that ! All I can say is keep Reading Because It Does Work.......
thanks mate i've already done lots of reading i guess i will drag the pc in and connect it that wayDamm it !
I thought you would say that !!!
Have no problems here M8 with XP Pro SP3....
You most likely have all the hardware setup correctly, but Finstones 7 handles hardware and interupts differently to XP...
Unfortunately I never used Vista or 7 cause excuse my French ! but they are Crap O.S's ......
I remember reading somewhere in the technomate threads relating to a similar issue with Windows seven so I am afraid you will have to USE the Search Button and do a bit of reading......
If you have an old computer lying around preferably real Old with Printer port, serial port etc, etc sticking out the back ,,, this may be easier than what you are currently using.......
Make sure System Device manager Ports and Comms and Com Port is Set to Com 1.....
Even if it says it IS AT COM 1 Change it again reboot in Safe mode to confirm.......
Other than that ! All I can say is keep Reading Because It Does Work.......
You're also Doing you bit for the Environment by recycling old equipment......
Sorry for being blunt ! :respect-062:
Best of Luck and keep Us informed !
Regards : Plessy:respect-051:
see if it helps to run fausto in compatibility on Windows 7
What to try first
If an older program doesn't run correctly, the first, and easiest, thing to try is the Program Compatibility troubleshooter. It can automatically detect and fix common problems that prevent older programs from installing or running correctly.
If That Failed: try running as XP or Windows 98/ME. Make older programs run in this version of WindowsCode:http://windows.microsoft.com/en-us/windows7/What-is-program-compatibility
Still no Luck:Code:http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows
Download Windows XP Mode: Windows XP Mode runs some older productivity programs that might not run on Windows 7
If this fails to: as suggested Plessy or find a way to dual boot your laptop.Code:http://www.microsoft.com/windows/virtual-pc/download.aspx
Last edited by Giga; 15-10-2010 at 02:06 AM.
Hi guys, thanks for all the support you give to users for Fausto (guess i will call you Faustians now ).
Well, with lots of patience and the correct drivers usb to serial and pcmcia to serial can work really good in win7 .
Already tested season and some other options under win7.
Have to say that for maximum compatibility i used a pcmcia card with a win@#$ something chipset and worked like a treat ( a cheap no name pcmcia to serial )
thought i would let everyone no that the problem was because my laptop was running windows 7 i've since installed vista and can connect easy thanks guys
special thanks to giga for sticking with me:respect-055:
hi giga me agian now i've got it connected can you tell me which channels it will open :respect-055:
bulsat 39° irdeto
load new fausto keys, info what opens is there to:
EMPB's Latest Diablo/Fausto,UnderWorld,Ipnosys West Europe <= click here
save your current softcam
load empty TM softcam so you can test these channels:
Empty Softcam Technomate <= click here
hi mate is there a way to view Jsc Sports on Hotbird
sometimes:
https://www.satpimps.co.uk/showthread.php?t=132425
other possible way:
https://www.satpimps.co.uk/showthread.php?t=139416
can't help you much with this, not a football fan
and the forum rules:
9) NO card share server requests.
Please do not post requests for card sharing servers etc
Any requests will be removed and the ppl involved banned.
Technical discussion on CS is ok
Code:https://www.satpimps.co.uk/showthread.php?t=56249
thanks giga but wheres the download sorry to be such a pain i have some difficulty navigating this sitesometimes:
https://www.satpimps.co.uk/showthread.php?t=132425
other possible way:
https://www.satpimps.co.uk/showthread.php?t=139416
can't help you much with this, not a football fan
and the forum rules:
Posting Permissions
Reply With Quote
Bookmarks