Page 1 of 4 123 ... LastLast
Results 1 to 20 of 67

Thread: Morsor Get EPG 2.2 NEW!

  1. #1
    V.I.P SAUS04's Avatar
    Join Date
    Jun 2008
    Posts
    300
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Icon14 Morsor Get EPG 2.2 NEW!

    2.2 getepg
    Attachment 1980Well, here I leave the last version of the plugin to install on any firm from the 4890 (KGD or not).

    The main novelty of this version is the use of epg.dat file has been replaced load the EPG function for the creation of epg.dat file you need in principle less memory and is faster, after the creation of frees memory file and then loads the EPG from the file, which is very fast, as a result, memory usage is lower, the upload speed is at least 6 times faster, we have the file generated for subsequent charging a startup script in order not to lose the restart and the info is loaded into the appropriate field allowing more characters.

    Some examples approximate speed:
    Loading EPG Digital + (140 channels) for 2 days - 45 seconds
    Loading EPG Digital + (140 channels) for a week - 1:30 minutes
    Loading EPG Sky Italia (530 channels) for a week - 3:30 minutes.

    Besides this, there have been some fixes in the xml (for example, has fixed the bug that did not eliminate the previous xml) and any thing else in the field of memory and has been added to getepg the parameter-A EPG convert all charged with capital letters (for those who have vision problems, lol) and the parameter-l for loading epg.dat generated (when getepg launches and loads the files but if you just want to do load without the whole process, this parameter does).

    KGD 4890 Installation on firm
    1 - Unzip the contents of the zip on your hard disk.
    2 - Copy files getepg, and getepg.conf DaemonEPG the epg folder to / plugins / PanelKGD / epg in our Azbox and give permissions 755 to getepg and DaemonEPG
    3 - Modify the getepg.conf to everyone's taste
    4 - If you have a script in / DISk2/etc/start.d to recharge the old EPG epgdat program, delete it.
    5 - Copy the script start.d content of the file folder that have been downloaded and unzipped to / DISk2/etc/start.dy give permissions 755
    6 - As I suppose you will have the daemon loaded from the menu of the getepg PanelKGD or you throw through the crond, modify this script last boot and remove the line it says. / DaemonEPG.

    Installation on non-firm KGD> 4890
    1 - Unzip the contents of the zip on your hard disk.
    2 - generate Azbox / PLUGINS a folder called PanelKGD (respecting upper) and within this another call epg
    3 - Copy all files in the file epg that have been downloaded and unzipped to / plugins / PanelKGD / epg (to be created before our Azbox) and give permissions 755 to getepg and DaemonEPG
    4 - Modify the getepg.conf to everyone's taste
    5 - Copy the script start.d content of the file folder that have been downloaded and unzipped to / DISk2/etc/start.dy give permissions 755
    6 - Connecting via telnet to Azbox and type:

    cd / PLUGINS / PanelKGD / epg
    . / DaemonEPG
    . / Getepg

    The second instruction memory, the daemon starts to load automatically every night and the third loading the epg.

    Note: I found that almost always fails in the end when loading the file into memory epg.dat but apparently the EPG is loaded without problems, so do not give him much importance.

    Note 2: I modified the tutorial according to these changes.

    \u003d\u003d\u003d\u003d\u003d\u0 03d\u003d\u003d\u003d\u003d\u003d \u003d\u003d\u003d\u003d\u003d\u0 03d\u003d\u003d\u003d\u003d\u003d \u003d\u003d\u003d\u003d\u003d\u0 03d\u003d\u003d\u003d\u003d\u003d \u003d\u003d\u003d\u003d\u003d\u0 03d\u003d\u003d\u003d\u003d\u003d \u003d
    Version 2.1 changes
    - Fixed bug in MediaHighway 1 with the time difference
    - Fixed bug with negative offset values in the getepg.conf
    - Now add events in MediaHighway 1 retransmissions
    - Added support for multiple character sets.
    \u003d\u003d\u003d\u003d\u003d\u0 03d\u003d\u003d\u003d\u003d\u003d \u003d\u003d\u003d\u003d\u003d\u0 03d\u003d\u003d\u003d\u003d\u003d \u003d\u003d\u003d\u003d\u003d\u0 03d\u003d\u003d\u003d\u003d\u003d \u003d\u003d\u003d\u003d\u003d\u0 03d\u003d\u003d\u003d\u003d\u003d \u003d
    Changes in version 2.2
    - Added standard protocol (Supplier Tivusat added in conf)
    - Added protocol Nova (using standard protocol but sent by a different pid)
    - For those who use MediaHighway 2 (Digital +) a surprise to see who is the first thing is, jejejeje

    (Files that change are the getepg.conf getepg and the rest remained even though I placed the last epg.excl epg.equiv and published.)

  2. #2
    V.I.P SAUS04's Avatar
    Join Date
    Jun 2008
    Posts
    300
    Thanks
    0
    Thanked 2 Times in 2 Posts
    this version is almost perfect. loads data without needing to reset box thankx morsor great work ...

    looking forward to e2 though

  3. #3
    Member
    Join Date
    Sep 2009
    Posts
    54
    Thanks
    5
    Thanked 0 Times in 0 Posts
    Is there any other frequency on Astra 2 on which SKY UK is transmitting its EPG? On 11778 V which is mentioned in the getepg.conf, there is no more signal.

  4. #4
    Junior Member
    Join Date
    Oct 2009
    Posts
    5
    Thanks
    0
    Thanked 0 Times in 0 Posts

    epg

    How to get viasat EPG on azbox elite, pleas explain.

  5. #5
    V.I.P hfmls's Avatar
    Join Date
    May 2009
    Posts
    1,819
    Thanks
    3
    Thanked 8 Times in 7 Posts
    works great
    thank you.

  6. #6
    Member
    Join Date
    Aug 2009
    Posts
    76
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by iceman3108 View Post
    Is there any other frequency on Astra 2 on which SKY UK is transmitting its EPG? On 11778 V which is mentioned in the getepg.conf, there is no more signal.
    I found this on another board about Sky UK in Spain 12129 V appears to be better there:


    Select the Frequency (GHz) box line and type in 12129 (the default is 11778).



    Scroll down and select Polarization. This should show V

  7. #7
    Member
    Join Date
    Sep 2009
    Posts
    54
    Thanks
    5
    Thanked 0 Times in 0 Posts
    Many thanks! I hope it will work, especially for the fact that it's on the south beam. In my region, the north beam has quite a low signal and the reception is not possible around the clock.

    Quote Originally Posted by neilD View Post
    I found this on another board about Sky UK in Spain 12129 V appears to be better there:


    Select the Frequency (GHz) box line and type in 12129 (the default is 11778).



    Scroll down and select Polarization. This should show V

  8. #8
    Member
    Join Date
    Aug 2009
    Posts
    76
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Is the error
    ERROR: TVSDK_LockTuner:1084 Fail to lock tuner freq = 11778000

    critical

  9. #9
    Member
    Join Date
    Sep 2010
    Posts
    86
    Thanks
    0
    Thanked 0 Times in 0 Posts
    does anyone know how to edit the 5am autoupdate ? I switch my box off at night and it's most commonly only switched on around 8pm-10pm in the evening... so I need to change the AU date to this.

  10. #10
    V.I.P Smudger's Avatar
    Join Date
    Dec 2004
    Posts
    758
    Thanks
    67
    Thanked 23 Times in 17 Posts
    I think it's
    ./DaemonEPG -t 19:00
    to run at eight or set to anytime you need. I know the time sounds wrong but thats the way it worked for me.
    I have seen it somewhere on the net.

    This needs to be in your startup script.

  11. #11
    Member
    Join Date
    Sep 2010
    Posts
    86
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by Smudger View Post
    I think it's
    ./DaemonEPG -t 19:00
    to run at eight or set to anytime you need. I know the time sounds wrong but thats the way it worked for me.
    I have seen it somewhere on the net.

    This needs to be in your startup script.
    Great thanks, so presently in my /DISK2/etc/start.d/S50epgKGD.sh I have

    #!/bin/sh
    cd /PLUGINS/PanelKGD/epg
    ./DaemonEPG
    ./getepg -l

    So I'll amend it to

    #!/bin/sh
    cd /PLUGINS/PanelKGD/epg
    ./DaemonEPG -t 20:00
    ./getepg -l


    does that look ok ?

  12. #12
    V.I.P Smudger's Avatar
    Join Date
    Dec 2004
    Posts
    758
    Thanks
    67
    Thanked 23 Times in 17 Posts
    Sorry I got it wrong it's not -t
    it's
    ./DaemonEPG -h 20-m 00

    this would would update every day at 20:00 although I think it would actually run at 21:00


    run it manually via telnet to test.
    Last edited by Smudger; 11-10-2010 at 08:47 PM.

  13. #13
    Member
    Join Date
    Sep 2010
    Posts
    86
    Thanks
    0
    Thanked 0 Times in 0 Posts
    thanks Smudger, ok edited it again to

    #!/bin/sh
    cd /PLUGINS/PanelKGD/epg
    ./DaemonEPG -h 20-m 00-d 7
    ./getepg -l

    hows that look ?

  14. #14
    V.I.P Smudger's Avatar
    Join Date
    Dec 2004
    Posts
    758
    Thanks
    67
    Thanked 23 Times in 17 Posts
    looks ok should load 7 days I've just run you settings in telnet. I find on my box my system time is always one hour slow so your settings would run at 21:00.


    Try it and see.
    Last edited by Smudger; 11-10-2010 at 09:03 PM.

  15. #15
    Member
    Join Date
    Sep 2010
    Posts
    86
    Thanks
    0
    Thanked 0 Times in 0 Posts
    tried it on mine with 1hr fwd and then one hour backward and then the correct time....I then waited for the times I had set but nothing seeemed to kick off an auto update of any of the files in my /DATA/hdb1/download/ directory ....if I do a manual update then these files update without an issue.

    I'm connecting in via SSH and using the foloowing syntex

    cd /PLUGINS/PanelKGD/epg
    ./DaemonEPG -h 20-m 32-d 7

    I then wait until that time, check my /DATA/hdb1/download/ directory and nothing seems to update

    did yours work ok ?

  16. #16
    V.I.P Smudger's Avatar
    Join Date
    Dec 2004
    Posts
    758
    Thanks
    67
    Thanked 23 Times in 17 Posts
    try using the command ps in telnet to see if running also try without the -d 7.

    also type date to see box time.

    did you killall any running DaemonEPG first.


    just tried different combinations sorry I can't get it to work, I used to have it set to a different time. Try googling I know it's mentioned on other boards.
    Last edited by Smudger; 11-10-2010 at 10:10 PM.

  17. #17
    Member
    Join Date
    Sep 2010
    Posts
    86
    Thanks
    0
    Thanked 0 Times in 0 Posts
    yep just tried all that and still no go....I found this page, what do you think or is it the same as what we have done, just in a different way ?

    HTML Code:
    http://translate.google.co.uk/translate?u=http%3A%2F%2Fwww.azboxhd.org%2Fguida-plugin-epg-per-immagine-kgd%2F&sl=es&tl=en&hl=&ie=UTF-8
    Last edited by lucky13; 12-10-2010 at 10:38 AM.

  18. #18
    V.I.P Smudger's Avatar
    Join Date
    Dec 2004
    Posts
    758
    Thanks
    67
    Thanked 23 Times in 17 Posts
    it's the same thing read it, it might give more info.

    also remove your live link from post before Admins chase you.

  19. #19
    Member
    Join Date
    Sep 2009
    Posts
    54
    Thanks
    5
    Thanked 0 Times in 0 Posts
    What about the channels which are on more satellites? For instance, Csat contains channels which are present both on Astra and HB, but also on Atlantic Bird 3. Ift I download the csat epg, how can I make it work on a channel, regardless the satellite it is transmitted on?

  20. #20
    Member
    Join Date
    Sep 2010
    Posts
    86
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I'm running the KILL_TV_EMU=1 option in PM 1.8 to get all performanc possible but when I switch back to TV I lose my GetEPG plugin, I can see I need to specify this to start again with the below option but I'm not sure the syntex to use



    RUN_AFTER_RETURN_FROM_KILL= # ==> IF DEFINED, PRIORITY MANAGER CAN START USER SELECTED
    # PROGRAMS AFTER SWITCHING BACK TO TV MODE AFTER TV AND EMU
    # KILLED. YOU CAN DEFINE YOUR EPG PLUGIN SCRIPT HERE. YOU CAN
    # DEFINE MULTIPLE COMMAND SEPARETED WITH " &; "

Page 1 of 4 123 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •