Hello,

I have done some test and for people that get stuck with Geeko :P in the VFD it is because you remove the USB stick after the first step - Upgrade Screen - 1. upgrade USB.

You need to leave the USB stick after the reboot in this step, if you remove the USB stick you will get stuck into Geeko :P mode.

So for people with the problem, power off your Azbox, connect back the USB stick FAT32 formatted with Enigma 2 patch.bin file into the Azbox.
Power it up and you will see that you will have Rescue Mode in the VFD and then you will have the IP address received from DHCP.

Then start Azup enter the IP address and press update button.
Azup will tell you when to remove the USB stick.

At the very first reboot (without USB stick) you will again have Geeko for a while just wait (I know it seems always long when we wait) if nothing happens then try to press Menu key.

For people that have change the DOM with an SD or CF adaptator it is better to power off and power on the Azbox rather than just reboot.

Hope this help.

Pr2