Hi mister-t many thanks once for your help so far
Can I PM you with my address so you can check my lon/lat
The one I am trying to use is 31.4 Lon --- 51.2 Lat I got these from multi map
As for a list of channels I can get I will send them to you tomorrow
Thats wrong, must be a typoThe one I am trying to use is 31.4 Lon --- 51.2 Lat I got these from multi map
got you pm and messaged you the usuals settings,as john.dat says that is wrong.from your location i get the settings asOriginally Posted by supergab
longitude 005.3w latitude 51.4n
mister-t
Hi Master-t
Many many thanks for sorting out my Lon/Lat
I input what you said Lon 005.3w -- Lat 51.4n
On all the east satillites all I get is No Signal when I go back in and delete the lon/lat I get all the channels back
So what it looks like to me is that when I did a back up of the files STB_ALL.UAD and STB_DB.UDB the lat/lon was reading 0000 then I did a factory reset
That is why I think that when I now do a factory reset and load these two files back I get some channels BUT as soon as I input the longitude latitude all I get is No Signal
I will send you a list of channel I get with out using Lon/Lat
Here is a list of channels I am getting
Sirius 5E Nothing
Hotbird 13E Novasport 1,2
JSC Sports1,2,3,4,5,6,7,8,9
Eatelsat 16.7E Canal +
Astra 19E Canal +
Last edited by supergab; 23-09-2010 at 11:53 AM.
ok first thing first 16.7e it dont exist 16e exists and no canal+ on that sat
personally i would re-load someone elses channel list,re-enter the long and lat settings i gave you,you seem to be scanning wrong sats somewhere
are you saving when you exit after putting in lat and long setings
seems to me for some reason you are scanning in the wrong sats
mister-t
16e channels check on king of sat
check the link as i am even more sure now you aint scanning the right sats
hotbird alone 13e should give you at leas nearly 900+ channels
mister-t
just thought of something
press sat on remote,satellite list should now be viewable.do you see eutelsat w2 16e,if yes scroll to it then press ok,then go to menue motor setup.
motor type should say usuals,scroll down to satellite position it should say
016.0e if not then change it with remote to 016.0e,maybe your satellite settings have altered for some reason
mister-t
Hi master-t
How about you sending me your channel list and let me try that with the Long/lat you give me and see what happens
I have changed 16.7 east back to 16 east some of the codes is in Conax where do I get the codes for Conax ???
As for Hotbird 13 east I get total of 977 channels
As you can see this is all new to me having to do all of it myself all the time it is a shot in the dark befour when I had a Technomat super 1500 + Ever time something went wrong my next door M8 would come and sort it out now he has move i am down the river with out a paddle
As I have said I have changed from 16.7 eest to 16 east for example go to the first channel on the list channel 0001 Film Thriller it opens for 2 seconds and then I get Scrambled channel by the way I get 359 channels on 16 East
Again I am working with NO Lat/Lon Like I said as soon as I input the setting that you sent me for Lon/Lat I lose all the channels
Last edited by supergab; 23-09-2010 at 02:08 PM.
not sure why you keep losing signal when you change to usuals,i will upload my channel list for you,if push comes to shove then just use diseqc motor
and manually move dish with east west untill you get signal then store
give me a few mins ok,
mister-t
uploaded my channel list for you,these are the sats that i can get from my location
mister-t
you wrote So what it looks like to me is that when I did a back up of the files STB_ALL.UAD and STB_DB.UDB the lat/lon was reading 0000 then I did a factory reset
did you re-load the above files?because if you are you are just going back to an earlier patch.load the latest patch click on sw update only,wait for box to reboot ,reload channel list
set lon and lat settings as before then see what happens
mister-t
Thank you master-t
Can you please let me know where i can find the latest patch
I have looked but I don't know what i am looking for
mister-t i thank you very much for sticking with me on this with you are very helpfull and very understanding I just don't where to turn to
look in spider box section patch and gift
New and Improved software for Spiderbox, 03 Sept
this is the latest patch by brutus
mister-t
Last edited by mister-t; 23-09-2010 at 04:54 PM.
Master-t you are a star
Thank you
Will let you know later how I get on
no problem,we are all here to help each other
mister-t
Hi master-t
I have loaded the latest patch and still on change put the Lon/Lat in and get No Signal put 0000 in and I get some channels
I have booked a satellite guro for Monday to see if my sat is out of lione so keeping my fingers crossed so whtch tis space
ok m8,let us all know the outcome
mister-t
Master-t you will be the first to know
Once again I thank you very much for all your help so far
Master-t
All sorted M8
The dish was 5mm out of alinement it took him 5 minutes to sort it out
Let me once again say to you M8 thank you very much indeed for alll your help I now know where to come went I am in trouble
Posting Permissions
Reply With Quote
Bookmarks