Adding channels (non linux boxes)

[Giga]

inspired by a dodgybrook posting <= click here, borrowed from Karl2047.
Tested on TM6900 HD Super, should be very similar on the non linux receivers.
Example: Supersport 6: 11658 H SR 27900 Video PID: [7][5][0][8] Audio PID: [2][3][0][5] PCR PID: [7][5][0][8]
On the remote [SAT] and select 16°East
Main Menu -> Installation -> Satellite Setup
Find the required Transponders you need to add channels and note Transponder N°


Main Menu -> Edit Channels -> Add Channels


in Transponder select the required frequency 11658 with the corresponding Transponder N°:
polarization is not showing here!



Fill in Channel Name: Supersport 6


Select Video PID and enter from remote [7][5][0][8]


Do the same for Audio PID: [2][3][0][5] and PCR PID: [7][5][0][8]


(EXIT) and confirm saving changes


do now the same for the other channels:
Supersport 7: 11658 H SR 27900 Video PID: [2][3][0][7] Audio PID: [2][3][0][8] PCR PID: [2][3][0][7]
Supersport 8: 10758 V SR 27500 Video PID: [2][3][1][0] Audio PID: [2][3][1][1] PCR PID: [2][3][1][0]

after this you find the added channels at the end of your channellist