Page 3 of 5 FirstFirst 12345 LastLast
Results 41 to 60 of 83

Thread: Mosers getEPG 2.0

  1. #41
    V.I.P zeini's Avatar
    Join Date
    Dec 2008
    Posts
    455
    Thanks
    5
    Thanked 91 Times in 52 Posts
    Do you have DVB-C tuner, DVB-T tuner, ISDB-T tuner, or ATSC tuner in your AZBoxHD?

    If, you don't have, than these error-messages are normal.

  2. #42
    Junior Member
    Join Date
    May 2009
    Posts
    21
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by ebro View Post
    morser, I still think you are using too many spaces. There should be no space in the commands "./DaemonEPG" and "./getepg". (remove the quotes)

    In linux you use the ./ to advise that you are running a command from the directory you are currently located in. The "DaemonEPG" or "getepg" ar the programs that are being run.
    The problem of space is caused by google translation

    Quote Originally Posted by thomo2710 View Post
    strggling a little bit here, can anybody help.

    i have everything where it should be but i get the following errors when i run the ./getepg command

    unlik fail!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!! No such file or directory.

    ERROR: ChannelSDK_LoadNetwork:767 Fail to open 'DISK2/DVBC.dat'
    ERROR: ChannelSDK_LoadNetwork:775 Fail to read networks from 'DISK2/DVBCTa.dat'
    ERROR: ChannelSDK_LoadNetwork:767 Fail to open 'DISK2/ISDBT.dat'
    ERROR: ChannelSDK_LoadNetwork:767 Fail to open 'DISK2/ATSC.dat'

    Display Mode: FND

    Comp: July 23 2010 15:32:39
    Ver: SDecoderCtrl.so, NormalPushCtrl 2.8.5.1.1956

    g_msg_client_connect : key_request 0x59075AB key_responce 0x59075AB
    ERROR: TVSDK_LockTuner: 1084 Fail to lock tuner freq =11778000

    and thats as far as i can get. My picture changes to scrambled and the OSD says Loading EPG (but doesnt)

    And sure enough the 3 files it fails to open do not exist and the 1 it can read is because the file exists but its empty.

    Any suggestions?

    Cheers
    Your problem is this

    ERROR: TVSDK_LockTuner: 1084 Fail to lock tuner freq =11778000

    Check the netindex of the satellite in MaZ in your channel list (the number to the left of the satellites names) should be 14. If not, put the correct number in the getepg.conf

    SkyUK skyUK 2 0 i 14;11778000;1 y /Download/skyuk.epg

  3. #43
    Senior Member
    Join Date
    Dec 2004
    Posts
    115
    Thanks
    5
    Thanked 15 Times in 7 Posts
    Any suggestions why I'm now getting this, only slyuk enabled in the conf file?

    AZBox[epg]$ ./ DaemonEPG
    -sh: ./: is a directory
    AZBox[epg]$ ./getepg
    ./getepg: can't load library 'mariesSKY'
    AZBox[epg]$

    Thanks again for all help

  4. #44
    Member
    Join Date
    Sep 2009
    Posts
    37
    Thanks
    2
    Thanked 5 Times in 2 Posts
    ./DaemonEPG

    use no spaces

  5. #45
    V.I.P SAUS04's Avatar
    Join Date
    Jun 2008
    Posts
    300
    Thanks
    0
    Thanked 2 Times in 2 Posts
    i dont have any probems with loading the data itself .. however with sly uk i find on certain channels it misses some time slices to when your viewing epg data it might show for example bbc news 18.00 - 18.30 next would show something like eastenders 20.00 so skips what ever was in between

    i am using latest firmware now but also seemed to do this on kgd firmware anyway to correct this blip morser?

  6. #46
    Senior Member
    Join Date
    Dec 2004
    Posts
    115
    Thanks
    5
    Thanked 15 Times in 7 Posts
    ./DaemonEPG produces this

    AZBox[~]$ cd /PLUGINS/PanelKGD/epg
    AZBox[epg]$ ./DaemonEPG
    ./DaemonEPG: can't load library 'LD_MAP'
    AZBox[epg]$ ./ DaemonEPG
    -sh: ./: is a directory
    AZBox[epg]$ ./getepg
    ./getepg: can't load library 'mariesSKY'
    AZBox[epg]$ ./ getepg
    -sh: ./: is a directory
    AZBox[epg]$

    as you can see introducing one space allows it to find directory but it won't load after getepg. Very strange

  7. #47
    Junior Member
    Join Date
    Aug 2010
    Posts
    28
    Thanks
    2
    Thanked 5 Times in 3 Posts
    Quote Originally Posted by morser View Post
    Your problem is this

    ERROR: TVSDK_LockTuner: 1084 Fail to lock tuner freq =11778000

    Check the netindex of the satellite in MaZ in your channel list (the number to the left of the satellites names) should be 14. If not, put the correct number in the getepg.conf

    SkyUK skyUK 2 0 i 14;11778000;1 y /Download/skyuk.epg
    Thanks boss - it was indeed my sky is 0 in my list as i ahve peed around with the satellites and channels files so only sky uk with the latest TP is on the box as thats all i want it for now.

    Now it starts but i get different errors now..

    Ill pop them up when i get a mo as i have to go out now.

    thanks for helping though to get as far as i have

  8. #48
    Member
    Join Date
    Sep 2009
    Posts
    54
    Thanks
    5
    Thanked 0 Times in 0 Posts
    I get this message over and over again. Yesterday I managed to load D+ epg, but today it doesn't work anymore, without having anything changed. Same for SkyIT and SkyUK.

    g_msq_client_connect : key_request 0x59075AB key_response 0x59075AC
    ERROR: TVSDK_GetEvent:307 timeout !! cmd 0x15
    ERROR: TVSDK_GetSystemLanguage:525 fail to receive 15
    ERROR: TVSDK_GetEvent:307 timeout !! cmd 0x15
    ERROR: TVSDK_GetSystemLanguage:525 fail to receive 20

  9. #49
    Junior Member
    Join Date
    May 2009
    Posts
    21
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by iceman3108 View Post
    I get this message over and over again. Yesterday I managed to load D+ epg, but today it doesn't work anymore, without having anything changed. Same for SkyIT and SkyUK.

    g_msq_client_connect : key_request 0x59075AB key_response 0x59075AC
    ERROR: TVSDK_GetEvent:307 timeout !! cmd 0x15
    ERROR: TVSDK_GetSystemLanguage:525 fail to receive 15
    ERROR: TVSDK_GetEvent:307 timeout !! cmd 0x15
    ERROR: TVSDK_GetSystemLanguage:525 fail to receive 20
    These continuous timeout errors occur due to lack of memory. Possibly you have running at the same time several emus or the priority manager. The solution may be to use the swap.

  10. #50
    V.I.P pr2's Avatar
    Join Date
    Jul 2006
    Posts
    669
    Thanks
    1
    Thanked 102 Times in 25 Posts
    @Morser

    Hello,

    I try your plugin on firmware 0.9.5020 it works except that I have a time difference.

    My setup is GMT+1 , daylight saving is ON, so meaning that I am now in GMT+02:00

    When I use your EPG with:
    Can***** mhw 2 0 i 9;12363000;1 y /DATA/hdb1/MorserEPG/csat.epg

    Then all the program are set in memory with +2hours, so the TV News is planned at 22H00 instead of 20H00 in the Azbox EGP.

    I try also with:

    Can***** mhw 2 -120 i 9;12363000;1 y /DATA/hdb1/MorserEPG/csat.epg

    To try to fix the problem but it seems that -120 is not properly handled because then I have only the normal current - next program.

    Another point in the MHW implementation it seems that there is a reccurent flag that is not handled. So for example, everyday at 20H00 it is the TV News, day 1 you have it in the EPG day 2 there is a blank at the TV News time, so I guess that to spare memory MHW EPG has a repeat feature that says that eveyday at the same time it is the same TV show, this doesn't seems to be supported in your implementation.

    Regards,

    Pr2

  11. #51
    Member
    Join Date
    May 2010
    Posts
    40
    Thanks
    3
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by nickman9271 View Post
    is there any chance we can get greek encoding because the font iso-8859 is only latin , and utf is also non readable in greek .
    any progress with greek encoding?
    i tried the"i" and the "u" option and also a few fonts with no luck.

    any suggestion?

  12. #52
    Junior Member
    Join Date
    Sep 2010
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Icon9

    Hello all,

    I am trying to install it, I followed the instructions and all I get is a Segmentation fault when I try to execute:

    AZBox[epg]$ ls -al
    drwxr-xr-x 2 root root 1024 Sep 7 02:06 ./
    drwxr-xr-x 4 root root 1024 Sep 7 01:44 ../
    -rwxr-xr-x 1 root root 15111 Sep 7 01:39 DaemonEPG*
    -rw-r--r-- 1 root root 1057 Sep 7 01:39 epg.equiv
    -rw-r--r-- 1 root root 949 Sep 7 01:39 epg.excl
    -rwxr-xr-x 1 root root 234868 Sep 7 01:39 getepg*
    -rw------- 1 root root 4747 Sep 7 02:06 getepg.conf
    AZBox[epg]$ ./DaemonEPG
    Segmentation fault

    AZBox[epg]$ ./getepg
    Segmentation fault

    I Have a Az HD+, FW 5020, fresh installed.

    Thanks for any help !

    -------------------------------------------------------------------------------------
    UPDATE:

    I decided to reformat my Az HD+. After reformatting, I was getting the same error. But after I rescan all channels and reboot, the Segmentation Fault stopped. Now I am getting the same error as luis88:

    AZBox[epg]$ ./getepg
    ./getepg: can't load library 'mariesSKY'
    AZBox[epg]$ ./DaemonEPG
    ./DaemonEPG: can't load library 'LD_MAP'
    Last edited by lexlth; 07-09-2010 at 04:23 AM.

  13. #53
    V.I.P zeini's Avatar
    Join Date
    Dec 2008
    Posts
    455
    Thanks
    5
    Thanked 91 Times in 52 Posts
    You must give all files 0755 permits!

  14. #54
    Junior Member
    Join Date
    Sep 2010
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Zeini,

    if you are answering to me, my files (DaemonEPG and getepg) are 755, exactly as I posted. The others are not necessary, because they are just text files that are read by the program. Anyway, I put all of then 755 and I got the same error.
    Seems to be some library that KGD has and default official dosen't.

    Thanks.
    Last edited by lexlth; 07-09-2010 at 12:31 PM.

  15. #55
    Junior Member
    Join Date
    Mar 2010
    Posts
    15
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by lexlth View Post
    Zeini,

    if you are answering to me, my files (DaemonEPG and getepg) are 755, exactly as I posted. The others are not necessary, because they are just text files that are read by the program. Anyway, I put all of then 755 and I got the same error.
    Seems to be some library that KGD has and default official dosen't.

    Thanks.
    the problem is the program that you use to send the files, try with another ftp software.
    in my mac i cant use filezilla to send to azbox, all files go with that kind of issues.

  16. #56
    Senior Member
    Join Date
    Dec 2004
    Posts
    115
    Thanks
    5
    Thanked 15 Times in 7 Posts
    tul, what programmes are you using with mac, i'm using filezilla and zoc6 for telnet?

  17. #57
    Junior Member
    Join Date
    May 2009
    Posts
    21
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I do not know these libraries but I do something like that happened long ago and the problem was to send files via ftp in text mode. When I send files in binary mode it worked without problems.

  18. #58
    Junior Member
    Join Date
    Sep 2010
    Posts
    3
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by tul View Post
    the problem is the program that you use to send the files, try with another ftp software.
    in my mac i cant use filezilla to send to azbox, all files go with that kind of issues.
    That's strange that filezilla puts errors on the files in AzBox, and only these getepg, because Every other file is sent perfectly.

    Does anyone has a hash to comprare ? I don't think this is the problem now, the problem is some missing libraries...

    Thanks... I'll try anyway to upload with linux command line.

    -----------------------------------------------------------------------------------------------

    UPDATE:
    The problem is not filezilla, it is really something related to the software. I've just installed KGD and it ran whitout any error message, no SegFault, NO missing libraries....
    Last edited by lexlth; 07-09-2010 at 06:19 PM.

  19. #59
    Junior Member
    Join Date
    May 2009
    Posts
    21
    Thanks
    0
    Thanked 0 Times in 0 Posts
    I do not know what the problem, but many people have installed the plugin on non-KGD firmwares and they work without problems.

  20. #60
    Member
    Join Date
    Sep 2010
    Posts
    37
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hi all,

    I just registered to say a huge thank you to morser for some excellent work in creating this! Absolutely brilliant and thanks again!

Page 3 of 5 FirstFirst 12345 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •