Mosers getEPG 2.0

[Smudger]

at about 04:01 this morning the skyuk.epg file was emptied to 1k I assume this was the started by the daemon starting the load procedure. 3 hours later and it's still the same.
if I do a ps I see /PLUGINS/PanelKGD/epg/ etepg -c 0
it did not appear to look correct but when I ran manually at the command prompt getepg last night it ran ok.
Is the daemon working correctly?

also last night around 22:00 when I did a reboot it loaded data into the epg.dat file ok.

Might have been a space problem so moved my plugins to hdd,

I cleared it all down ran it all again, will see what happens tonight.

[xanadu]

I did finally get this working last night on Sly UK, but the EPG data was still downloading after an hour, so I decided to abort, but it did load the data ok, not sure how many days, as I left it at the defaults which I think is 2 days.

[beamobhoy]

Worked great for me last night though didn't stay in memory after reboot. Anyone shed any light for me?

[satworld98]

What image are you using that works?

Can someone who have this working tell me if he gets a menu when this plugin is selected with the remote?

0.9.5020....it keeps the epg in the memory even after reboot but it seems to have lost it overnight..had to manually reload it...the startup script didnt seems to work when I restarted azbox but otherwise good.

[luis88]

Any tips on getting this installed? I've tried to install it 6 times so far I'm using filezilla to ftp and the directories all appear as though they are created correctly and kgdpanel appears in plugins on the azbox itself, but as soon as i go to telnet using zoc it tells me the directories don't exist and in the azbox itself ok'ing kgdpanel tells me that there is no executable and to reinstall the plug in. Any ideas guys?

[xanadu]

Any tips on getting this installed? I've tried to install it 6 times so far I'm using filezilla to ftp and the directories all appear as though they are created correctly and kgdpanel appears in plugins on the azbox itself, but as soon as i go to telnet using zoc it tells me the directories don't exist and in the azbox itself ok'ing kgdpanel tells me that there is no executable and to reinstall the plug in. Any ideas guys?

Problem I found is the original post is full of bad english and wrong information, so if you follow the instructions in the ops post it will not work!

[zeini]

Do you have the upper and lower case followed precisely. For the folders, the files and the commands.

[xanadu]

5 - Copy the script files into the folder the file start.d have downloaded and unzipped to / DISk2/etc/start.dy give 755 permits

There is NO start.dy directory.....Unzip to start.d directory which exists as default.

6 - Connect via telnet to Azbox and type:


cd / PLUGINS / PanelKGD / epg
. / DaemonEPG
. / Getepg

Don't use spaces in the commands.

This command should get you in the epg directory, so that you can run DaemonEPG and getepg

After running getepg, you should see the EPG data loading, and your Azbox display will say Loading EPG data or something like that...


Don't forget to edit getepg.conf file for the EPG you require....remove the # and change the days if required..

[thor]

menu? i think people are getting confused with kgd panel .. you can install this seprately if you like go to azboxhd.es it will explain but the getepg is activated through commands

i

Yes you are right something is confusing about kgd panel. Can you please put here link to this plugin for I do not understand Spanish.

Thanks

[beamobhoy]

Now i've got it all working, i'm really starting to love my azbox!!
Many thanks team!

[zeini]

I have also installed the getepg-plugin 2 days ago. And I'm really happy. All works fine. Many thanks to morser.

[zeini]

@SAUS04:

Please can you edit your post in the first thread this

cd / PLUGINS / PanelKGD / epg
. / DaemonEPG
. / Getepg

to

cd /PLUGINS/PanelKGD/epg
./DaemonEPG
./getepg

All users who have no knowledge with linux, have many problems if the spaces are not correct and the command getepg is written not in case-sensitive.

Thank you

[luis88]

Thanks for replies guys from what you say I think I have been following correct procedure, I've tried again but still no luck. Can you spot anything wrong here? Files all seem to be where they should be all 755 conf hash removed?

AZBox login: root
Password:
AZBox[~]$ cd/PLUGINS/PanelKGD/epg
-sh: cd/PLUGINS/PanelKGD/epg: No such file or directory
AZBox[~]$ ./DaemonEPG
-sh: ./DaemonEPG: No such file or directory
AZBox[~]$ ./getepg
-sh: ./getepg: No such file or directory
AZBox[~]$

ftp://root@10xxxx/PLUGINS/PanelKGD/epg

[xanadu]

Can you spot anything wrong here?
AZBox login: root
Password:
AZBox[~]$ cd/PLUGINS/PanelKGD/epg
-sh: cd/PLUGINS/PanelKGD/epg: No such file or directory

There should be a space in this line between cd and / as shown below...

cd /PLUGINS/PanelKGD/epg

[luis88]

Well spotted, we make progress...


AZBox[~]$ cd /PLUGINS/PanelKGD/epg
AZBox[epg]$ ./DaemonEPG
./DaemonEPG: can't load library 'LD_MAP'
AZBox[epg]$

Ahh now I get it more spaces

AZBox login: root
Password:
AZBox[~]$ cd /PLUGINS/PanelKGD/epg
AZBox[epg]$ ./DaemonEPG
./DaemonEPG: can't load library 'LD_MAP'
AZBox[epg]$ . / DaemonEPG
-sh: .: /: is a directory
AZBox[epg]$ . / getepg
-sh: .: /: is a directory
AZBox[epg]$

[luis88]

But azbox doesn't appear to be doing anything, nothing on display not much in epg as usual, what am I missing....polite suggestions only please

[morser]

Hello luis88. Which firm do you use? This plugin only works from 0.9.4890 firm

[luis88]

Hello Morser, Have tried it on 4991 and 5020 which is the one I have made most progress with today.
Thanks for all your efforts, by the way

[ebro]

morser, I still think you are using too many spaces. There should be no space in the commands "./DaemonEPG" and "./getepg". (remove the quotes)

In linux you use the ./ to advise that you are running a command from the directory you are currently located in. The "DaemonEPG" or "getepg" ar the programs that are being run.

[thomo2710]

strggling a little bit here, can anybody help.

i have everything where it should be but i get the following errors when i run the ./getepg command

unlik fail!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!! No such file or directory.

ERROR: ChannelSDK_LoadNetwork:767 Fail to open 'DISK2/DVBC.dat'
ERROR: ChannelSDK_LoadNetwork:775 Fail to read networks from 'DISK2/DVBCTa.dat'
ERROR: ChannelSDK_LoadNetwork:767 Fail to open 'DISK2/ISDBT.dat'
ERROR: ChannelSDK_LoadNetwork:767 Fail to open 'DISK2/ATSC.dat'

Display Mode: FND

Comp: July 23 2010 15:32:39
Ver: SDecoderCtrl.so, NormalPushCtrl 2.8.5.1.1956

g_msg_client_connect : key_request 0x59075AB key_responce 0x59075AB
ERROR: TVSDK_LockTuner: 1084 Fail to lock tuner freq =11778000

and thats as far as i can get. My picture changes to scrambled and the OSD says Loading EPG (but doesnt)

And sure enough the 3 files it fails to open do not exist and the 1 it can read is because the file exists but its empty.

Any suggestions?

Cheers