9.9.4931 - telesat® - mod & AZBox4YU

[bilbobg]

9.9.4931 - telesat® - mod & AZBox4YU

This image is a modifictaion of original 0.9.4931 and it is, in a first place, for dummies.
The idea is that dummy, which is usng AZBox for a first time, can get basics for normal use of it,
without any knowledge of linux/stb.

Installing this FW you are getting:
- new skin, which is, by my opinion, more elegant from the original one;
- ch list for the most watched satellites for usals DiseqC motor
- plugins: liveonsat, livefeeds, tevee4yu, WeatherForecast, SudoQ, tuxchess_0.2, colorbars, PassReset
- CAMs and camreader: Mbox, MGCamd, MultiCAS, CheopsCAS and NewCS (CardReader)
by default Mbox and Newcs are active, cofigured to work together,
which means that the only thing that you should do is to put your original card in the slot and the image will appear
You can choose CAMs by pushing '****|' button
You can get ECM info if you push '****' button
- font 'telesat_Uni4AZ.ttf' - subtitles have better visibility (space is ok)
- Network is set on automatic assigning of network parameters - DHCP
After your first restart, on VFD you will get IP address, which is assigned to AZBox
- Network services activated: SSH, Telnet, FTP
- SAMBA activated and set right
- Settings for downloading plugins and CAMs - reset

After you install FW and your first restart, you'll get setup menu.
Choose 'TV channel', then 'Tuner A.DVB-S' and 'Antenna Setup', go down to 'Positioner Setup - USALS', press OK and enter your USALS parameters.
After you go out from the menu, remove your USB stick, reboot your AZBox pressing POWER button down for 5 seconds.
Your AZBox is now ready to be used.

Gratitude goes out to the AZBox4YU team:
Chemstar - for the preinstalled plugins
iPod - for the idea
Roger Rabbit - moral support
Mickey - testing
Thief - proof-reading
telesat - the one responsible for the existance of this FW

ATTENTION :
IF update with new FW is succesful - you will get SETUP menu, in other case - pls renew update !



h__p://rapidshare.com/files/400714762/9.9.4931.rar.html

[Dig Deep]

Looks like a nice idea !

[eme]

would help dummys if u re post key button colours and action as this rediculas text blocker on hear thinks ur bracking the rules. cheers :respect-050:

[eme]

i have now installed this version and it went in no problem. dont like anti setup as i had to change all setting to of for sats, but others will like it as its ready setup for them. all i have done is put cccam .config file in and all at this point is well. not sure i like the new menu screen yet but time will tell. loads of extras to play with. will let u know waht probs if any i get. have fun. :respect-067:

[zeini]

Very interesting that with this version 1.0 was skipped, and immediately begins 9.x. :congratulations-008

[eme]

gone back to 4923, to meney problems with play back and recording.:respect-050:

[abujonas]

thank you brother

[SatSearcher]

Looks nice, only problem i have is multicas doesn't seem to work.

[ronniee]

I can't get ECM info if you push '****' button. Only a black rectangle. Why?
the ecm info file is in /tmp/ecm.info is in the right position?
i give it 755 rights

[Smudger]

@ronniee

Did you add lines

INFO = /tmp/ccc_ecm.info
REFRESH = 5

to openxcas.conf ?

also if still not working use command
dos2unix openxcas.conf
in multicas folder.

[ronniee]

thanks
but the problem is, I don't run multicas
only cccam server with OpenXCAS/dvbapiCAS

in this case I need to enable Multicas?
why can't display the ecm.info text? the file is created at /tmp/ecm.info