Results 1 to 9 of 9

Thread: PVR playback

  1. #1
    Member
    Join Date
    Jan 2005
    Posts
    43
    Thanks
    0
    Thanked 0 Times in 0 Posts

    PVR playback

    Hi all
    My axbox has a problem with recording playback.Pic freezes,reboot needed 2/3 times to detected hdd again, using latest firmware.hdd is WD 500G sata2 green. Question is this a bug in firmware or incompatible hdd

  2. #2
    Senior Member ade1970's Avatar
    Join Date
    Dec 2004
    Posts
    227
    Thanks
    0
    Thanked 0 Times in 0 Posts

    same prob

    hi, i believe gthis is the latest fw bug as i've not had this prob before, only since upgrade...can you record fta ok?

  3. #3
    V.I.P eme's Avatar
    Join Date
    Dec 2004
    Posts
    587
    Thanks
    0
    Thanked 0 Times in 0 Posts
    latest firmware records in sd no problems at all here, hd, small freezing on cs.

  4. #4
    Member
    Join Date
    Jan 2005
    Posts
    43
    Thanks
    0
    Thanked 0 Times in 0 Posts
    it records fine in hd /sd, just playback freexes iv tried 2 hdd both WD sata2 green with the same result,it could be it dont like WD hdd.whats the best hdd 4 the azbox

  5. #5
    Member
    Join Date
    Sep 2009
    Posts
    37
    Thanks
    0
    Thanked 0 Times in 0 Posts
    i had the same problems with hdd and now i'm using a 2,5'' seagate 160gb .
    it won't fit properly to the mount but what the heck it is working .
    maybe the less power consumption is critical .

  6. #6
    Member
    Join Date
    Jan 2005
    Posts
    43
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by nickman9271 View Post
    i had the same problems with hdd and now i'm using a 2,5'' seagate 160gb .
    it won't fit properly to the mount but what the heck it is working .
    maybe the less power consumption is critical .
    thanks i thought it was the hdd.time 2 buy a new 1 , any1 recommend 1tb drive or a 500g

  7. #7
    Member
    Join Date
    Jan 2005
    Posts
    43
    Thanks
    0
    Thanked 0 Times in 0 Posts
    sorted my problem,drive now playing back smooth.all it was jumper setting
    OPT1 enable jumper on pins 5-6
    1.5gb/s data transfer speed activated
    may be of help 2 others

  8. #8
    Member
    Join Date
    Sep 2009
    Posts
    54
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by peter1176 View Post
    sorted my problem,drive now playing back smooth.all it was jumper setting
    OPT1 enable jumper on pins 5-6
    1.5gb/s data transfer speed activated
    may be of help 2 others
    I had the same problem when I installed an WD HDD on by box last October. It was a big headache until I found the solution, as there was no information at all on the forums about the hard disk needing a jumper setting in order to run smooth on the Azbox.

  9. #9
    Junior Member
    Join Date
    Oct 2010
    Posts
    15
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by iceman3108 View Post
    I had the same problem when I installed an WD HDD on by box last October. It was a big headache until I found the solution, as there was no information at all on the forums about the hard disk needing a jumper setting in order to run smooth on the Azbox.
    thanks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •