Results 1 to 2 of 2

Thread: ICE Installer V1.5 by KinkDink

  1. #1
    V.I.P kinkdink's Avatar
    Join Date
    Dec 2009
    Posts
    16
    Thanks
    0
    Thanked 1 Time in 1 Post

    ICE Installer V1.5 by KinkDink



    ICE Installer V1.5 by KinkDink
    For ICECRYPT S4000 HD PVR and OCTAGON S1018HD PVR Receivers.

    Whats New:
    Mcas & Keditor: Bug fixed for storing keys
    Xcamclient & Xcamconfigure: slots increased up to 20.

    -------------------------------------
    Firmware Requirements
    -------------------------------------
    ICECRYPT S4000 HD PVR Firmware Version: v1.07.94 or above.
    OCTAGON SF1018 HD ALLIANCE V1.07.94 or above.

    -------------------------------
    Installer Instructions
    -------------------------------
    First, get the IP address of your receiver. To do this:
    Press Menu --> Installation --> Network Settings --> change DHCP off and then ON

    You will then get an IP number.

    Unzip all the files including all the folders in this zip to your local HDD.
    Be sure to tick the box "Use Folder Names" or "Extract Full Paths" depending on your Zip Utility.
    File structure should look like this on your Hard Disk after unzipping.

    ICE_Installer.exe
    README.txt
    CCcam (folder)
    incubusCamd (folder)
    Xcam (folder)
    Mcas (folder)
    SoftCam (folder)

    If you don't see the folders then you've unzipped the files incorrectly.

    -----------------------------------------------------------------------------
    Editing CCcam.cfg Instructions for CCcam
    -----------------------------------------------------------------------------

    Edit the CCcam.cfg file in the /CCcam/var/keys folder and add your C line.
    Use a suitable text editor like notepad to do this then save the file.

    Example, to add a C Line you'd enter the following

    C: server_address.com port username password

    To make it simpler, lets say:
    my server URL is server_address.com
    My port number is 12000
    My username is: kinkdink
    My password is: satdudez

    My C Line would look like this in CCcam.cfg

    C: server_address.com 12000 kinkdink satdudez

    -----------------------------------------------------------------------------
    Editing cardclient.conf Instructions for Xcam
    -----------------------------------------------------------------------------

    Edit the cardclient.conf file in the /Xcam/var/etc folder and add your C line.
    Use a suitable text editor like wordpad to do this then save the file.

    Example, to add a C Line you'd enter the following

    cccam2:server_address.com:Port-number:0/0/0:username:Password

    To make it simpler, lets say:
    my server URL is server_address.com
    My port number is 12000
    My username is: kinkdink
    My password is: satdudez

    My C Line would look like this in cardclient.conf

    cccam2:server_address.com:12000:0/0/0:kinkdink:satdudez

    -----------------------------------------------------------------------------
    Editing incubusCamd.conf file for incubusCamd
    -----------------------------------------------------------------------------

    Edit the incubusCamd.conf file in the /incubusCamd/var/keys folder and add your C line.
    Use a suitable text editor like wordpad to do this then save the file.

    Let's assume someone has sent you a C line in CCcam format and you want to convert that line to work in incubusCamd.conf file.
    C: cs_server.com 12000 username password no { 0:0:2 }

    csserver.com is the server domain
    12000 is the port number
    username is obvious
    password is obvious
    no is don't share emu

    To convert that line to work with incubusCamd you'd enter the line like this in incubusCamd.conf

    card_server_url=cccam://username:Password @ csserver.com:12000

    NOTE:- in the above example remove the spaces before and after the @

    --------------------------------------------------------------
    Updating SoftCam.Key when required
    --------------------------------------------------------------
    To keep your SoftCam.Key file up to date simply download the latest SoftCam.Key file from the Internet and
    unzip the SoftCam.Key file to the /SoftCam folder where the Ice Installer program resides.
    Then enter the IP address of your receiver in the IP Address box and click on the Update SoftCam.Key button to transfer
    the file to the receiver.

    ----------------------------------------------
    Installing the files Instructions
    ----------------------------------------------

    Now run the ICE_Installer.exe application.

    Enter the IP address of your ICECRYPT S4000HD or OCTAGON SF1018HD Receiver into the IP Address box.
    Unless you have changed the password of your receiver leave the password box blank.
    If you have added a password to your receiver then enter that password into the password box.
    Click on the INSTALL button to FTP the files to the Receiver.

    When all files have successfully transferred, power off the receiver (power switch on the back)
    to reboot, then power on.

    In Receiver Menu:

    Press Menu --> Utilities --> CAS --> OK Button
    Switch internal card reader OFF.

    Reboot Receiver.
    Press Menu --> Utilities --> CAS --> Plugin --> OK Button
    You'll see the list of Plugins, cursor up or down to select your plugin
    Press the Green Button to start the plugin.

    Job done.

  2. #2
    Security Admin echelon's Avatar
    Join Date
    Dec 2004
    Posts
    12,732
    Thanks
    13,913
    Thanked 9,112 Times in 4,411 Posts
    newcs:-
    I have figured out that if you edit the same config file with a newcamd N line it works as a local share off that same server box
    ( my local lan , the host server box is using a fixed local ip )

    example ( use the newcamd N section for this line , and use a # line above it for comments )

    # n line below connecting to local host server on 192.168.1.100
    newcamd:192.168.1.100:12000:0/0000/0000:Name:Password:01020304050607 08091011121314
    #

    so thats newcamd : ip address : port number : 0/0000/0000 : name : pass : deskey 1 to 14 as above ( no spaces )

    substitute a host address for the ip address if the source is external

    paste the line into the bottom of the newcamd N section halfway down the actual file , below the examples that are in there

    and I can set the xcam to auto from manual in the plugin menu so a reboot activates it and shows newcamd in the server line

    obviously you have to have the server running newcs and add the name and pass etc to newcs in the newcs control panel

  3. The Following User Says Thank You to echelon For This Useful Post:

    Johndubai2014 (28-11-2015)

Similar Threads

  1. xCam / Mcas Installer V1.0 by KinkDink
    By kinkdink in forum Tools & Editors
    Replies: 1
    Last Post: 24-03-2010, 03:59 AM
  2. ICECRYPT S4000 octaCAM Auto Installer
    By kinkdink in forum Tools & Editors
    Replies: 0
    Last Post: 26-02-2010, 11:46 PM
  3. Replies: 0
    Last Post: 24-02-2010, 02:09 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •