NB:- the latest patches are dated march 2012

This is how to set it up the easiest way possible.
===============================
USALS motor setup.
_________________________________ __
Connect all cables.
LNB cable to LNB in
HDMI or Scart connected between the TV and the spiderbox
Network cable connected. One end to the spiderbox and the other to a suitable router.
Turn it on There IS a switch at the back.
press the power switch in your remote control to turn it on.

Press the menu button.

Select the Installation section by scrolling right/left

Go to motor setup, press OK

Enter pin code "0000"

Press the green button to allow you to enter your longitude and latitude.

Longitude is switched between E & W by pressing the < and > buttons.

Enter your longitude by using the number keys. Note: if your Longitude is 1.5W (for example) you must enter 001.5W in this field.

Enter your latitude, e,g, 55.6N. You can change N to S with the arrow keys too, but most of you won't want to do that.

Scroll down to save and press OK.

********************************* ***************** **
Apply a patch:
_______________

Get a USB stick.

Download a patch from here https://www.satpimps.co.uk/forumdisplay.php?f=579

EXTRACT the file (*.uad) from the rar file and copy it to your USB stick.
You must extract the file using winzip or winrar or a similar program as the rar file on a USB stick will not be of any use to you.

Insert the USB stick into one of the USB ports in your spiderbox.

Go to the Accessory Section of the menu and select USB.

Scroll to the .uad file you have copied there and press OK

In the popup window, select S/W Update

Wait for your box to load the patch.. DO NOT POWER OFF

The box will reboot by itself with the new patch installed.

=================================
Apply a settings list
_________________________________ ____

Following the same procedures as for loading a patch, load a settings file from here: https://www.satpimps.co.uk/forumdisplay.php?f=576
You are all set.

NB:-

the new versions of the 9000hd box & Combo box (september 2010) does not get activated via Neuvoxstream anymore as it does not work ..
you install your new patch and go to Ethernet+ and register there .. the key will pop up and say connected