Humax 2000HD Channel List motorised 43 east- 30 west with favs and ITV HD set to Usals my Usals so set to yours after loading all channels for Diablo 2 Dragon etc :respect-055:
Humax 2000HD Channel List motorised 43 east- 30 west with favs and ITV HD set to Usals my Usals so set to yours after loading all channels for Diablo 2 Dragon etc :respect-055:
Hi satpaul,
I'd like to thank you. I am sure I am not the only one who has been waiting for such a list.
Could you give us some more info on what it includes (or not)?
I guess only one way to find out... possibly at the weekend.
You say it is USALS, any problems if I do not use USALS?
Also what FW is it based on?
If you do not have the time to answer, do not worry.
I will try to upload it to my HDCI2000 at the weekend (after backing up my old one, of course).
Thanks.
tinto de verano
Version 16 firmware
all done today took 5 hours
all setup for Diablo cam or dragon
USALS set to
N53.1
W0.6
can be set to diseqc 1.2
thank you
great list, we should put our LAT y LONG first in the Humax
Hi All,
Its been so long, Is it Null or Serial cable to upload
to Humax Hd STB, Thanke.
BF...
Thanks satpaul. I needed a fixed dish version (DiseqC 1.0) for four LNB's, so I've taken the liberty of converting the file for my and anybody else's needs (cut and paste job in Formula).
_http://rapidshare.com/files/367274170/Humax_HDCI2000_23_03_10_Fixed_Dis h_DiseqC_1.0.zip
Last edited by Magwitch; 23-03-2010 at 11:26 PM. Reason: For some reason a space appears between 's' and 'h' in 'Dish'. Rectify that before downloading from Rapidshare.
What loader do you sue to load this settings from scratch?
Help!
Hi Pajao,
You need Formula EU (Channel Editor for HDCI-2000 Model), which you should be able to get from the Humax website.
tinto de verano
Added later:
Formula EU for European units, or
Formula ME for Middle East units
Last edited by tinto de verano; 22-04-2010 at 03:34 PM.
The receiver had to be reset when I had it repaired.
I used this but the reciever still stood in the Menu position when reconnected to the TV. What is going on?
Am I doing somthing wrong.
Sounds like you are doing something wrong m8,load programme to comp.then if I remember correctly you have to open it and turn on box,when loaded you then need the loader programme on you computorswitch off box on back,then open loader it will then ask for box to be switched on and it will connect,open new list and send to box,I think that you have to turn box off at rear even for loading first programme.
is this settings too big? I've deleted the Radio channels though before transfering data. This currently going but takes some time. I hope it works now.
I deleted the radio channels on Fomula and save the file before uploading. Will this still work after data transfer?
My experience of the loader is you need to save to desk top and then open that copy and send to receiver otherwise it seems to default to all again .
The uploading has now completed the satelite is back on standby. shall i see if there any channels loaded on the TV?
Have a go,always keep a copy of your list so you can always get back to it.
Sorry, my PC just crashed...
Anyway@ if it fails, hopefully not, try uploading SatPaus's original channel list, without editing/deleting any (radio) channels.
That might work.
Although it will hopefully work even if you deleted some.
You can always delet them, one by one, slow, painful in the HDCI.
Ermm... if all goes well, please, remember to press the Thanks button, please.
Thanks.
tinto de verano
Didn't work?
Sorry to hear that.
Maybe becuase you edited/deleted some (radio) channels?
As I was saying earlier, try to upload SatPaul's list as is.
Good luck.
tinto de verano
Surry, I have to leave now.
But I will try to be back tomorrow to try and help you.
tinto de verano
What proceedure are you following to upload new channel list and which programme are you using please.
Bookmarks