CCcam 2.1.4 for azbox

[DeformE]

***DeformCCC ver 1.ab
improvements:
--more stable than ver 1.aa
--fakeroot was edited for better decoding performance
--unnecassary files were deleted
--handler v1.ab was added
--with handler cccam has beter performance for first decoding and give ecm information from dvbapi_module
--easy to install
thanks for hfmls
***DeformCCC ver 1.ac
--CCcam.prio and CCcam.channelinfo supporting has been added
--dvbapiCAS and DeformCCC have collected in a file in archive file
--to install easyier than ver 1.ab
********How to Install***********
--copyDeformeCCCV1ac.tar file to your main directory(/)
--if you have dvbapiCAS give that command "rm -r /PLUGINS/OpenXCAS/dvbapiCAS" and "rm -r /PLUGINS/OpenXCAS/DeformCCC"
--give tar xf /DeformeCCCV1ac.tar commands
--add dvbapiCAS your module.soq file and open it after that disable Multicas
--change CCcam.cfg file under cccam directory and give file permission as 755
--add your prio and channelinfo file under cccam directory
--open dvbapiCAS your openxcas menu and they should be active
...DeformE

http://www.mediafire.com/file/zyywym...rmeCCCV1ac.rar

[DeformE]

instruction is turkish im translate it english now

[DeformE]

Firstly /MMP path must be writable with mount -o remount,rw /dev/hda1 /MMP
after that newrootglibcbuydeforme.tar should be on main path(/) and with tar xf newrootglibcbuydeforme.tar open file
Files in lib.zip to put in /MMP/newroot-glibcv/lib path
give that to console mkdir /MMP/newroot-glibcv/libf and than Files in fornewroot.zip to move this path.
chmod 755 -R /MMP/newroot-glibcv change files permisson with this.
cp /MMP/newroot-glibcv/lib/ld.so.1 /lib copy ld.so.1 to /lib with that.
After that add libf to LD_LIBRARY_PATH with export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/MMP/newroot-glibcv/libf
enter in cd /MMP/newroot-glibcv/bin and give this command ./fakeroot -l /lib/ld-uClibc.so.0
now on console sh-3.00# should be written
After that change the library envoirment but after you do it some programs on AZbox might not work with new library just it affect only that console apart from this console nothing will affect that...
export LD_LIBRARY_PATH=/MMP/newroot-glibcv/lib change path with that
change LD_PRELOAD with export LD_PRELOAD=/MMP/newroot-glibcv/lib/libdvbapi.so
and than you can work cccam that is have file permission

--also i have compiled fakeroot for uclibc and it is in the rar file

Thanks...
DeforMe

[Carp95]

When a file is set to private by its owner only the owner of the file can access it. If you are the owner of the file please log into your account to access this file.
If you believe you have reached this page in error

Notting to get

[DeformE]

it is a misunderstanding sorry

[medmed]

the link is dead , the new link is :
http://www.sendspace.com/file/oiordi

[DeformE]

link is ok now...

[alcatel]

Firstly /MMP path must be writable with mount -o remount,rw /dev/hda1 /MMP
after that newrootglibcbuydeforme.tar should be on main path(/) and with tar xf newrootglibcbuydeforme.tar open file
Files in lib.zip to put in /MMP/newroot-gclibcv/lib path
give that to console mkdir /MMP/newroot-gclibcv/libf and than Files in fornewroot.zip to move this path.
chmod 755 -R /MMP/newroot-gclibcv change files permisson with this.
cp /MMP/newroot-gclibcv/lib/ld.so.1 /lib copy ld.so.1 to /lib with that.
After that add libf to LD_LIBRARY_PATH with export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/MMP/newroot-glibcv/libf
enter in cd /MMP/newroot-gclibcv/bin and give this command ./fakeroot -l /lib/ld-uClibc.so.0
now on console sh-3.00# should be written
After that change the library envoirment but after you do it some programs on AZbox might not work with new library just it affect only that console apart from this console nothing will affect that...
export LD_LIBRARY_PATH=/MMP/newroot-gclibcv/lib change path with that
change LD_PRELOAD with export LD_PRELOAD=/MMP/newroot-glibcv/lib/libdvbapi.so
and than you can work cccam that is have file permission

--also i have compiled fakeroot for uclibc and it is in the rar file

Thanks...
DeforMe

Could you please check this ?
i'm trying to install it,but it seems that the directory names are not correct.

after this command.

ar xf newrootglibcbuydeforme.tar

it extracts to /MMP but the directory name is.

newroot-glibcv

in your next steps,you mention the following directory

newroot-gclibcv

why are the lib directory apart in the zip file ?
isn't it simpler to put it already in the right dir ?

thanks for your work,i like to try some more!! :hurray:

[DeformE]

ahh sorry i meant glibc directory thaks for your notice i have fixed insturction

[alcatel]

i got it running,but it doesn't decode anything

[happyhammer]

i got it running,but it doesn't decode anything

i got it running also. just connects, dont send any requests


sh-3.00# ./CCcam.mipsel -d
17:22:23.506 CCcam: ================================= ===========================
17:22:23.511 CCcam: starting CCcam 2.1.4 compiled on Jan 30 2010@16:28:03
17:22:23.513 CCcam: ================================= ===========================
17:22:23.520 CCcam: online using nodeId ************
17:22:23.556 CCcam: DM7025 detected
17:22:23.557 CCcam: create 8 cam device(s)
17:22:24.500 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
17:22:24.502 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
17:22:24.504 CCcam: static cw not found or bad
17:22:24.507 CCcam: parsed 0 entries from /var/etc/CCcam.prio
17:22:24.648 CCcam: added 510 provider names from /var/etc/CCcam.providers
17:22:24.651 CCcam: added 4 channel names from /var/etc/CCcam.channelinfo
17:22:24.659 CCcam: server started on port 12000

[alcatel]

i got it running also. just connects, dont send any requests


sh-3.00# ./CCcam.mipsel -d
17:22:23.506 CCcam: ================================= ===========================
17:22:23.511 CCcam: starting CCcam 2.1.4 compiled on Jan 30 2010@16:28:03
17:22:23.513 CCcam: ================================= ===========================
17:22:23.520 CCcam: online using nodeId ************
17:22:23.556 CCcam: DM7025 detected
17:22:23.557 CCcam: create 8 cam device(s)
17:22:24.500 CCcam: readKeyfile: cannot open /var/keys/SoftCam.Key or not found
17:22:24.502 CCcam: readKeyfile: cannot open /var/keys/AutoRoll.Key or not found
17:22:24.504 CCcam: static cw not found or bad
17:22:24.507 CCcam: parsed 0 entries from /var/etc/CCcam.prio
17:22:24.648 CCcam: added 510 provider names from /var/etc/CCcam.providers
17:22:24.651 CCcam: added 4 channel names from /var/etc/CCcam.channelinfo
17:22:24.659 CCcam: server started on port 12000

Got the same output,only i got "CCcam: DM8000 detected"
i have a premium

[DeformE]

firslty you must move your cfg files correct path after that also you must work with dvbapi you should see dm800 not 7025 your ld_preload must work correctly and than dvbapi_modul and cccam_module should been killed with kill command you can use it #ps -all and with pid that is on ps -all #killl pid finally dvbapi_module must been opened again.

[DeformE]

in my internet some of port is closed so i cant try it no sharing prtokol doesnt work in my internet :(

[happyhammer]

i'm a little out of my depth at this stage, but i dont see any dvbapi_module. ????

[hanswurscht]

Does it read internal Card ? No?
Does it freeze ? yes?
Does it anything better then Multicas? no ?

[DeformE]

it is in /EMU you can find it find . | grep dvbapi_module and after that can you try with CCcam.mipsel -dv if i doesnt work you can try to delete and crate a new /var/etc direcory after you get backup

[DeformE]

has it decoded channels?

[killerno]

Hi

Is there any way to run 2.1.4 CCCam server on azbox?I do not want to decrypt any channel(use Multicas),i only want to run a 2.1.4 server with C and F lines.
Cheers

[DeformE]

im trying it but now n line seems ok it connect server correctly