this error make big problem on azbox newest generation :(
Please dont use option in Azbox menu HARDWARE ACELERATION, you will kill
your Azbox :ack2:
You must make now JTAG flash :(
this error make big problem on azbox newest generation :(
Please dont use option in Azbox menu HARDWARE ACELERATION, you will kill
your Azbox :ack2:
You must make now JTAG flash :(
Having the same problem here was doing a flash and it stopped in 4/5 @51% :willy_nilly:
no patch bin in USB storage used same storage before
Huh... I'm keeping H/A option ON and works smothly so far... been thru several fw upgrades since OpenSat included acceleration in their fw and got no probs whatsoever...
Hmm looks like I've killed my Premium :/ after trying to get back to original FW from Enigma2 azbox hangs and stucks now only in booting. Only jtag mode is a rescue?
It happend while I've uploaded original FW via AZup and after about hour I've plugged off the box now i get only booting on VFD :/
You refering to the E2 topic but sorry ther is 70% of crap posts so If you know wich post tells how to solve the problem pls send it here. TNX in advance.
I've tried that already few times with different images no luck :( only booting
EDIT:
Just tried other USB stick with LED (flashing while stick is working) and when I put it into AzBox it's not responding so I thing no power or usb slots are not active.
Last edited by naporex; 06-10-2010 at 10:12 PM.
My Azbox Premium+ only shows "BOOTING" and nothing else happends!
I have tried with different USB memory sticks and even a WD HDD formated in FAT32. I have run power off/on with USB sticked in place, no response on the LCD. Before I tested the Enigma firmware it worked OK.
I run the "AzboxEnigma2RESCUE" with no problem.:respect-063:
i cant load e2 on my premium. it gets stuck on booting after install. i have no problem rolling back to official fw. it was fine before i tested e2
Just get recovered my Premium from dead
CA-42 usb cable with switched Tx Rx pins worked! Now my box is fully operational again
Hi Naporex,
Can you plz explain the process? I also have a similar problem with my azbox. I installed the newest RTI core v1.2, and after reboot i hangs on 29%, and i am unable to come into rescue mode. The box will not respond to USB-stick with patch.bin, and i cannot obtain an IP-address from the box.
Thanks
Christian
imnot sure how many of these problems are simular to the ones i had but my my azbox power board was fluctuating power output . i chaanged the caps on the power board and now my poaer is stable and no more boot hanging from time to time , i also dont need to reboot as often .
using lastest beta original .
hello friends give her a reboot and then press the remote's V + to see if you get rescue mode, and there must leave the upgrade, format area, re-download the latest firmware and reloads it, I suggest you change pendrive, it gets a 1Gb and give slow fat32 format your pc, then you put the latest firmware here renaming will only patch.bin.
Bookmarks