Results 1 to 3 of 3

Thread: Spiderbox 9000HD Beginners Set-up Guide

  1. #1
    Member frunko's Avatar
    Join Date
    Sep 2008
    Posts
    27
    Thanks
    0
    Thanked 4 Times in 1 Post

    Spiderbox 9000HD Beginners Set-up Guide

    Seen this online, and thought it would be good to share with our fellow pimps!


    Setting up your Spiderbox
    This is how to set it up the easiest way possible.
    ===============================
    USALS motor setup.
    _________________________________ __
    Connect all cables.
    LNB cable to LNB in
    HDMI or Scart connected between the TV and the spiderbox
    Network cable connected. One end to the spiderbox and the other to a suitable router.
    Turn it on There IS a switch at the back.
    press the power switch in your remote control to turn it on.

    Press the menu button.

    Select the Installation section by scrolling right/left

    Go to motor setup, press OK

    Enter pin code "0000"

    Press the green button to allow you to enter your longitude and latitude.

    Longitude is switched between E & W by pressing the < and > buttons.

    Enter your longitude by using the number keys. Note: if your Longitude is 1.5W (for example) you must enter 001.5W in this field.

    Enter your latitude, e,g, 55.6N. You can change N to S with the arrow keys too, but most of you won't want to do that.

    Scroll down to save and press OK.

    ********************************* ***************** **
    Apply a patch:
    _______________

    Get a USB stick.

    Download a patch if you have not requested, or do not want the gift channels
    For a patch with the gift channels, download a gift patch.


    EXTRACT the file (*.uad) from the rar file and copy it to your USB stick.
    You must extract the file using winzip or winrar or a similar program as the rar file on a USB stick will not be of any use to you.

    Insert the USB stick into one of the USB ports in your spiderbox.

    Go to the Accessory Section of the menu and select USB.

    Scroll to the .uad file you have copied there and press OK

    In the popup window, select S/W Update

    Wait for your box to load the patch.. DO NOT POWER OFF

    The box will reboot by itself with the new patch installed.

    =================================
    Apply a settings list
    -----------------------------------------------------------------------------
    Fix Tools for SpiderBox HD and FORCE BOOT
    Fix Tools for SpiderBox HD and FORCE BOOT
    -----------------------------------------------------------------------
    Adding external servers
    If you have a patch loaded, and you want to add a CCcam or newcamd server to your spiderbox..

    In the Accessories menu, select Network
    the third entry down in the first colum is "Server" select "Server Setup" to the right of that field.
    You will see a column with "01.Off" to "08.Off"

    Select the field next to 01.Off.

    Type gives you the option of CCCAM or NEWCAMD
    The entried are almost identical for these setups

    Selecting CCCAM
    You must have a C-Line given to you by a friend with a server, or one you have created yourelf if you have your own server.

    If you have a line like
    C: friend.dyndns.org 12000 login password
    it may have other parameters beyond password, ignore them
    or
    C: friend.no-ip.tv 13000 login password { 0:0:2 } etc..

    Enter the name "friend.dyndns.org" or "friend.no-ip.tv" into the "Name or IP Address" field.

    Enter 12000 or 13000 etc. (it cna have whatever value the server owner sets) into the "Port" field

    ID and Password are obvious.

    For Newcamd, you must have been given an N-Line which looks like this

    N: friend,dyndns.org 11000 login password 01 02 03 04 05 06 07 08 09 10 11 12 13 14

    The only difference is that it starts with an "N" which is discarded for our purposes, and the string of numbers 01 - 14 (in this case) which is the DES Key.

    enter the sequence given to you by your friend in the DES Key field without spaces.
    The example above would look like this
    0102030405060708091011121314

    To save your CCCAM or NEWCAMD lines, select "Apply" at the bottom of each screen.
    -------------------------------------------------------------------------------------------------------------------------------
    Cfg for CCcam by usb.
    Cfg for CCcam only by USB
    This is another fantastic Option of SpiderBox,,,

    Putting The C line in Tex just by USB....
    Can be similar Text file like in DM..but in easy way not Ftp needed....ONLY USB 1 sec.



    You write in Text files your C line
    Like

    C: xxx-no-ip.info 12000 user1 user2



    Mean for CCcam for example

    CCcam

    Name or IP = xxx-no-i.info
    Port= 1200
    ID=user1
    Pass=user2

    Remember to unzip first.
    --------------------------------------------------------------------------------------------

    1) open the cfg file (it may open by clicking normally or you may need to open it with edit with notepad function or alike)

    2) make sure its empty inside

    3) open your do***ent that has your cline in it (it may open by clicking normally or you may need to open it with edit with notepad function or alike)

    4)copy your cline and paste it into cfg file

    5) close cfg file
    6) send cfg file to usb
    7) upload usb to spiderbox and you will be asked do you want to import cfg YES OR NO....naturally you select yes and job done...



    Any corrections, suggestions or tips on this receiver welcome.


    - Frunko
    Last edited by frunko; 22-01-2010 at 11:08 PM.

  2. The Following 4 Users Say Thank You to frunko For This Useful Post:

    deltec (20-06-2012), Dr. House (08-10-2011), spidersat (22-10-2013), staples (23-03-2015)

  3. #2
    Member
    Join Date
    Nov 2008
    Posts
    16
    Thanks
    0
    Thanked 1 Time in 1 Post
    One vital thing missing from this post is the info on how to access the server details from the Network menu

    When you want to start the gift patch for the first time or add a C line you must:

    Go into Network from accessory menu
    Type: ON (If you see off, scroll sideways to turn the network on)
    Network: IP Setup
    Home Stream server:

    With patch installed press 1111

    New options will appear

    Type
    Network
    Server
    Net SW Download
    Home Stream Server
    NuevoXstream (if you have a gift patch installed)
    Homeplus
    Service+
    NEWCAMD Server Setup


    On a box made before the deadline date of august 2010 , if you click on NuevoXstream you can activate the gift patch.
    If the box is produced after August 2010 then only the SERVICE+ gift is available to you and you should ignore Nuevoxstream completely


    The Server option above will let you enter the C line or N line of another external server if you wish, or you can also copy it from USB in a text file of course

    NEWCAMD is used for sending N lines out

    the NET SW update is not used as yet

  4. The Following User Says Thank You to deckymck For This Useful Post:

    spidersat (22-10-2013)

  5. #3
    Verified Registered User
    Join Date
    Dec 2004
    Posts
    103
    Thanks
    71
    Thanked 22 Times in 13 Posts
    only a small correction...
    quote:
    (For a patch with the gift channels, download a non gift patch.)
    end quote:
    should offcourse be,
    For a patch with the gift channels, download a gift patch.

  6. The Following 2 Users Say Thank You to chris-k For This Useful Post:

    deltec (15-09-2011), spidersat (22-10-2013)

Similar Threads

  1. 6900 super c s beginners guide
    By jaydee in forum 6000 series
    Replies: 2
    Last Post: 22-01-2010, 10:54 AM
  2. Beginners Guide to the Cuberevo/Ipbox
    By catseye in forum CubeRevo Newbie Questions
    Replies: 4
    Last Post: 19-05-2009, 07:20 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •