Results 1 to 7 of 7

Thread: How to install latest patches on 6900 super hd

  1. #1
    Junior Member
    Join Date
    Dec 2004
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts

    How to install latest patches on 6900 super hd

    I haven't installed any new patches on my 6900 super hd for some time. Looking at the latest patches I am nervous about how to do these as they talk about factory resets etc. Before I have just put the new patch on with a usb stick.

    Before installing the the latest patch which I think is called a magic patch could someone give me step by step instructions on how it should be done please.

  2. #2
    V.I.P Giga's Avatar
    Join Date
    Feb 2009
    Posts
    4,161
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Patching

    use the latest patch!
    If you use a motorized dish take note on paper of its settings
    other settings you may take a look at and take note:
    System Settings
    Time Settings
    A/V Settings
    - Display Format
    RF Type & channel (if you use UHF antenne out to other TV's)
    Digital Audio: PCM/DOLBY SPDIF/DOLBY HDMI
    OSD Settings (on screen display)
    Front Display Settings (blue light on/off, ...)
    Password setting 0 0 0 0 (set yours and its behaviour)
    IP Settings

    use a fat32 formatted USB stick
    1 - Do backup by USB
    Main Menu
    USB
    Data Transfer
    If you get a choice [/USB1][/USB0] 1 is the stick, 0 would be the USB Harddisc, make your choice where to put your backup channellist
    Upload Channel
    after this you find your current channellist with this format Year Month Day- Time when recorded 20091129-134035.CNDF (keep always a safe copy on your computer.
    Upload Key
    after this you find your current softcam with this format Year Month Day- Time when recorded
    20091129-134035.key
    Exit to channel
    8 2 8 1 Server List Window opens
    (SAT) CSInfo Upload
    after this you find your current CSinfo with this format Year Month Day- Time when recorded
    CSInfo_20091129-134035.txt

    Unzip the PhantompatchTM6900HDSuper_ ###p.rar (7zip works with both: Rar & Zip)
    Code:
    www.7-zip.org
    put these files on the USB Stick
    • TM6900HDSuper_###-day-month-year.stb official firmware
    • PhantompatchTM6900HDSuper_ ###p.stb patched firmware
    • 2-ADDON_002p.stb

    put the stick in the TM
    Main Menu
    System Settings
    Factory Reset
    Enter Pin 0 0 0 0 if you did not change this!
    receiver reboots
    English or preferred language

    2 - load official firmware
    Main Menu
    USB
    Data Transfer
    select the stick if you have the choice
    in the file list select (move orange background on it with remote cursor keys) TM6900HDSuper_###-day-month-year.stb and press ok
    receiver reboots

    Main Menu
    System Settings
    Factory Reset
    Enter Pin 0 0 0 0 if you did not change this!
    receiver reboots
    English or preferred language

    3 - load patched firmware 1st
    Main Menu
    USB
    Data Transfer
    select the stick if you have the choice
    in the file list select (move orange background on it with remote cursor keys) PhantompatchTM6900HDSuper_ ###p.stb and press ok
    The writing process happens several times reaching 100% let the box finish its writing and it will reboot. After the reboot:

    Main Menu
    System Settings
    Factory Reset
    Enter Pin 0 0 0 0 if you did not change this!
    receiver reboots
    English or preferred language

    4 - load add on 2nd
    Main Menu
    USB
    Data Transfer
    in the file list select 2-ADDON_002p.stb and press OK
    wait until the box reboots.

    Main Menu
    System Settings
    Factory Reset press OK
    Enter Pin 0 0 0 0 if you did not change this!
    Factory Reset
    Saving Wait
    Menu Language: English OK (or your choice)
    Country: Europe OK (or your choice)
    Main Menu exit on remote

    5 - reload channellist, softcam, CSInfo
    No Channel:
    Main Menu
    USB
    Data Transfer
    If you get a choice [/USB1][/USB0] and left the USB stick on Technomate select [/USB0]
    you should see the patches and the channellist, softcam & CSInfolist you saved:
    20091129-134035.CNDF select it and press OK
    Select DB to Save: Default DB ok
    OK again
    Select DB to Save: Normal DB ok
    20091129-134035.key select it and press OK
    CSInfo_20091129-134035.txt select it and press OK

    take your paper notes and check the user settings
    Last edited by Giga; 17-09-2010 at 02:10 PM. Reason: updated procedure

  3. #3
    V.I.P Giga's Avatar
    Join Date
    Feb 2009
    Posts
    4,161
    Thanks
    0
    Thanked 0 Times in 0 Posts
    changed patching procedure <= click here to current situation:
    • backup what you can
    • factory resets
    • latest official firmware > patch > add on
    • reload backups

  4. #4
    Junior Member
    Join Date
    Sep 2010
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hi Giga,

    I'm a little confused by this part:-

    Main Menu
    USB
    Data Transfer
    If you get a choice [/USB1][/USB0] 1 is the stick, 0 would be the USB Harddisc, make your choice where to put your backup channellist
    ● Upload Channel
    after this you find your current channellist with this format Year Month Day- Time when recorded 20091129-134035.CNDF (keep always a safe copy on your computer.
    ● Upload Key
    after this you find your current softcam with this format Year Month Day- Time when recorded
    20091129-134035.key
    Exit to channel
    8 2 8 1 Server List Window opens
    (SAT) CSInfo Upload
    after this you find your current CSinfo with this format Year Month Day- Time when recorded
    CSInfo_20091129-134035.txt

    Unzip the PhantompatchTM6900HDSuper_ ###p.rar (7zip works with both: Rar & Zip)
    I saved the first two files, but when pressing 8281 and accessing the server list, there is no CSInfo upload option. What do I need to do to get that option? I've tried pressing the Sat button?

    I have a 6900 Super that was patched by the previous owner, so have no idea of what revision it is? Is there a list of what the later patches offer over the original?

    Also, are you able to describe how the filter works on the 8281 menu?

    Cheers, Lee
    Last edited by lscolman; 19-09-2010 at 08:00 PM.

  5. #5
    V.I.P Giga's Avatar
    Join Date
    Feb 2009
    Posts
    4,161
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Guess the patch on your TM 6900 HD Super is not recent. check what is loaded on your
    Main Menu -> System Information
    2nd Line: S/W Version:
    this feature appeared in 7.25p
    do***entation on patches is scarce:
    think you can find info in this posting:
    https://www.satpimps.co.uk/showthread.php?t=114462

  6. #6
    Junior Member
    Join Date
    Sep 2010
    Posts
    22
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Can you advise how to change com port settings on XP?

  7. #7
    V.I.P Giga's Avatar
    Join Date
    Feb 2009
    Posts
    4,161
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Quote Originally Posted by gogogunners View Post
    Can you advise how to change com port settings on XP?
    change properties of comport: <= click here
    comport settings: <= click here

Similar Threads

  1. Abracadabra and Alekto Cards..INFO's
    By Andrew007 in forum Echolink
    Replies: 10
    Last Post: 12-11-2009, 06:14 PM
  2. technomate 6900 super or technomate 6900
    By uki in forum 6000 series
    Replies: 2
    Last Post: 16-03-2009, 12:49 PM
  3. Eurosport2 Thursday 27th/Fri 28th No
    By rabbi in forum Whats on - TV Guide
    Replies: 0
    Last Post: 27-11-2008, 10:16 AM
  4. Techno 6900 Combo Super eSATA and Netwo
    By Alex10000 in forum 6000 series
    Replies: 0
    Last Post: 16-11-2008, 11:53 PM
  5. BBCPrime
    By stavros in forum Viaccess
    Replies: 12
    Last Post: 16-11-2008, 08:59 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •