Technomate 6900super

[RABBY]

drahcirk


[QUOTE][have u activated the part in ur computer,./QUOTE]


Think you meen the [Router] m8 Nothing to do with your computer!

[Giga]

Hi Giga,
Have followed all your advice but the router is still not recognising the TM. Does the LAN PORT IN THE tm NEED ACTIVATING? this is probably a stupid question.
Wink

no the port is active: if cable is connected a yellow led should light up at the back. Try red button and see if you get the addresses from the router?
If nothing happens, fill in by hand (select each field with remotes cursor, type digits in from remote:
IP address: 192.168.0.5
Subnet Mask: 255.255.255.0
Gateway: 123.168.0.1
DNS: 192.168.0.1
exit and confirm save.

you should now see the TM 6900 in the Viewing Attached Devices
for the ip address use one you don't see in Viewing Attached Devices

[wink]

I don't understand.
Wink

[holmroad]

Hopefully the new firmware posted by Compass today may help here?

[wink]

I am eternally grateful for all your help. I have now got an IP address fro my TM. A friend of mine sent his cabler around and he diagnosed a fault in the cable. However he changed a few wires around and finally got it to work. I only need to find a server now.
Wink:respect-066:

[Giga]

google is your best friend

[jok64]

can i just add to this ive never had that red scan button working up to this day has anyone else ? does it work ? ive always put ip in manually

[Giga]

yes the red button does work to obtain an IP if the router is set to provide one. Sometimes you need to switch off everything and restart everything. Most important thing that it works either manually or with the scan button.

[wink]

When I get the box up on the TM to put in a card share site I cannot match up the strings.

I have. Name

System

ID

Password

Address

Port

Deskey

When I download a cardshare I get,

Name

Protokol (system)

Host

Deskey

User

Pass

Port

CAID

Which of these goes where in the TM box. Please help

[Giga]

When I get the box up on the TM to put in a card share site I cannot match up the strings.

Name = Name (whatever you want to call it so you can recognise it)
System = Protokol (system) (newcamd or cccam)
ID = User (Login)
Password = Pass
Address = Host (name of server {www.satpimps.co.uk} or IP address {127.0.0.1})
Port = Port
Deskey = Deskey

CAID can be used in the filter

[sprouts]

Not getting any where with connecting to LAN port on the 6900

Both lights lit on my LAN port?

I am sure tat can't be right? Any LAN experts tell me if I have a faulty LAN port on my 6900?

Thanks

[Giga]

green steady, yellow blinking

[sprouts]

green steady, yellow blinking

Thank for such a quick reply, the problem was a bad hub.

Now for some serious reading on all of this to try to get up to speed.
I am sure I will be back soon

[gentlmen]

I do apologies if I steel the thread, I would like to know if I can connect my TM6900 super+ via wireless??
My PC upstairs xp sp3 connected with Safecom router which I can use laptops downstarts....
Regards...
Gen...

[fred fickle]

I do apologies if I steel the thread, I would like to know if I can connect my TM6900 super+ via wireless??
My PC upstairs xp sp3 connected with Safecom router which I can use laptops downstarts....
Regards...
Gen...

Yes just make sure all the settings on the router including encreyption keys are the same on any receivers/computers or wi-fi cams you want to connect.:respect-010:

[gentlmen]

Well I am very please about this, now I can start setting up with your help if its ok....
There is lots of thread about ip settings and Internet connection through Ethernet cables but I couldn't see any regrading wireless connection (unless I've missed)
TM patch is 688p ATM, do i need to install latest one 703p?
Is there any instruction how to on wireless?

Regards..
Gen...

[Giga]

I'm not 100% sure on this: I don't think TM6900 supports USB Wifi?
If you're using another kind of wifi where the ethernet port of the TM connects to this wireless, this wireless should provide the IP address and security settings like login and security key should be put in that device to make the connection to your home wifi.

So test before you buy Wifi equipment and find out it is not working as it should, if you are in doubt get some help with friends who have the networking and wifi knowledge.

The device needed might be a Wireless Ethernet Bridge, hope other members will report on the WiFi and Technomate 6000 HD Super

[gentlmen]

Well Giga, thats a bad news now, its shame TM has no Wireless option on it, is there way to add this via patch? maybe Magic guy can help on this, i am sure I am not the only one with this problem?


Gen...

[sprouts]

Well Giga, thats a bad news now, its shame TM has no Wireless option on it, is there way to add this via patch? maybe Magic guy can help on this, i am sure I am not the only one with this problem?


Gen...

Do a search for

WIRELESS LAN ETHERNET CONVERTER

:victory-045:

[Giga]

and don't go for these:
USB to Ethernet