Results 1 to 2 of 2

Thread: Problem with Azbox and Diseqc 1.1

  1. #1
    Senior Member kleinerjunge's Avatar
    Join Date
    Apr 2009
    Posts
    99
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Problem with Azbox and Diseqc 1.1

    Hi!

    I have a big problem with my Azbox with Firmware 3501 and Diseqc 1.1!

    Here my config:
    Toroidal T90 with 8 LNB's. EMP Centauri Multiswitch 17/8, Spaun SAR 411 Diseqc 4in1 and a Spaun SUR 420 as uncommited Switch.

    1°W, 13°E, 19.2°E and 28.2°E are connected to the 17/8 switch.
    5°E, 7°E, 16°E and 23.5°E are connected to the Spaun SAR 411.

    To 2 of the 4 inputs of my Spaun SUR 420 (uncommited Switch) arrives a cable from 17/8 switch (output) and from SAR 411 (output). Then to output of my SUR 420 my Azbox is attached.

    If I config the Azbox as Goran described in his do***entation, I get no signal on the 4 satellites attached on SAR 411!

    I tried all other configs, but I get no signal on these for satellites!

    On my dream all goes fine with this config:

    LNB 0: 1°W, Switch A/A, uncommited Switch 1
    LNB 1: 13°E, Switch A/B, uncommited Switch 1
    LNB 2: 19.2°E, Switch B/A, uncommited Switch 1
    LNB 3: 28.2°E, Switch B/B, uncommited Switch 1
    LNB 4: 5°E, Switch A/A, uncommited Switch 2
    LNB 5: 7°E, Switch A/B, uncommited Switch 2
    LNB 6: 16°E, Switch B/A, uncommited Switch 2
    LNB 7: 23.5°E, Switch B/B, uncommited Switch 2

    Further the option "Sequence repeat" is switched on at Dreambox. No "Fast Diseqc" and no "Swap Commands"

    What am I doing wrong? Is there a bug on firmware 3501? Not yet tried another firmware...
    I also tried NOT to change "Committed/Uncommited" to "Uncommited/Commited" (as Goran said). But also no luck!!

    Please help...

    Thx in advance!

    cu
    KJ

  2. #2
    Senior Member kleinerjunge's Avatar
    Join Date
    Apr 2009
    Posts
    99
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hm, that's curious!

    Configured all satellites via MAZ2.0. After that deleted from Azbox the files antenna_list.dat, DVBS.dat and all_channel.dat. Transferred the three ones created by MAZ with a channel list of sofrenic, and now it works...

    cu
    KJ

Similar Threads

  1. New AZbox little help please
    By boblester40 in forum AZBox Premium Discussion
    Replies: 10
    Last Post: 01-10-2009, 10:21 AM
  2. help on cs in incubus
    By aqa in forum AZBox HD Newbie Questions
    Replies: 56
    Last Post: 19-05-2009, 02:46 AM
  3. To buy or not to buy Azbox premium, advice needed for newbie.
    By HotRock in forum AZBox HD Newbie Questions
    Replies: 6
    Last Post: 17-05-2009, 06:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •