cams...working on azbox premium?

[mushroom]

hi
i want to update some cards i have on azbox premium and i must do it with the use of a viaccess and irdeto cam.can i use these cams on azbox? any configuration needed?

[mushroom]

thanx NeotionBox.do i need to configure any files? as i am completely noobie especially with updating cards

[mushroom]

well my first try gives the following output but then stucks

./emu_module &
1136
MMP[MultiCAS]$ [EMU_MOD] main: Init Key
Open 1st [at EMU] :: ok..
################################# #################################
################################# #################################
DefaultKeyDate :: Date 20090806
emu_all_ktbl->KeyDate :: Date 20090806
################################# #################################
################################# #################################
UpdateAllKeyFlash2Ram :: Date 20090806
################################# #################################
Viaccess MAX Index = 88
SECA MAX Index = 22
Irdeto MAX Index = 107
NAGRA MAX Index = 96
CrytoWorks MAX Index = 64
Conax MAX Index = 4
BISS MAX Index = 112
################################# #################################
Open 1st [at EMU] :: ok.. -/EMU/OpenXCAS/MultiCAS/card_key.bin-
################################# #################################
Define_CardKey_date :: Date 20090806
CARD_Key_Data->CardKeyDate :: Date 20090806
################################# #################################
**** NAIrd_Act = 0
**** NAEmmU_f = 1 | NAEmmS_f = 1 | NAEmmG_f = 1 || NAAutoRoll = 1 || ActiveBlocker = 0
**** Server-IP : 0.0.0.0 [Port = 3000]
**** LS_Mode = 0 | LS_Timeout_for_Recvfrom = 4 | LS_Sequence = 0 || LS_ClientIP_Count = 0
Open 1st [at EMU] :: ok.. -/EMU/OpenXCAS/MultiCAS/Data9F.bin-
[EMU_MOD] main: Init ecm/emm module
[EMU_MOD] main: Start EMU Module
[OPENXCAS_MOD] main: Start EMU Module(WORKING DIR = /EMU/OpenXCAS)
[OPENXCAS_API:Thu Oct 1 16:12:48.707] load_xcas_control:98 ## loaded controller ID = 0x19760507
osdep_msq_server_open : key_request 0x42E0AC94 key_response 0x42E0AC95
osdep_msq_server_open : request msq is already created
osdep_msq_server_open : response msq is already created
osdep_msq_client_connect : key_request 0x42E0AC94 key_response 0x42E0AC95
[EMU_MOD] main: Init SmartCard
-->Start init_sc_main()...
sc_card[0].opened = 0xFFFFFFFF[-1]
-->sc_main_Tid = 0xc04 [3076]
SamrtCard Open OK :: 9

--****> Cold Reset :: sc=0
card_mode_reset reset_status = 1
[EMU_MOD] main: START_PMT_ECM(sequence = 7)
[EMU_MOD] main Request_CAS_id[0] = 0x0
CheckBiss In>Service ID 3503 | VideoPid 2003 | AudioPid 3003 | SAT_Position 90
[EMU_MOD] main ****> biss_act = 0
[EMU_MOD] Take_ecm_pid_for_emu: SteamID = 0, Req_CAS_id = 0x0, Req_Prov_id = 0x0, Act_CA_CNT = 0 [PMTCasIDNum:3]
[EMU_MOD] main ****> ecm_pid = 0x68
[EMU_CTRL] main: START_CAT_EMM [stream_id = 0]
[EMU_CTRL] main: START_CAT_EMM :: New CAT.. [cat_ret:1]
********>[cat_arrive:0] last_cat_msg_size = 0x24[36]
[EMU_MOD] Emu_CallBackECM: Emu_CallBackECM : Emu_No = 0 <<< Channel_change=1 ****>
[EMU_MOD] Emu_CallBackECM: Emu_CallBackECM : Emu_No = 0 <<< Channel_change=1 ****>
[EMU_MOD]-->EMM_ECM_ACT is 0
<<< OD :: Module Name MultiCAS | Ver 1.57E-D04[with LS] | Date 2009-09-05 ****>
[EMU_MOD] Emu_Act_ECM**** Thu Oct 1 16:12:49.271 <SteamID:0> emu_card_mode = 0[emu_card_mode_emm=0]
Smart Card is inserted..
--> CARD_INSERTED...
[EMU_MOD] Emu_Act_ECM: do_ecm = 0 || ca_system_id = 0x624
[EMU_MOD] Emu_EnableMode: SteamID = 0 Act_CA_Count = 0 [Request_CAS_id = 0x0]
[EMU_MOD] Emu_EnableMode: ----- nPMT[SteamID:0].PMTCasIDNum = 3 -----
********>[cat_arrive is 1] Now Try to act about CAT...
CheckBiss In>Service ID 3503 | VideoPid 2003 | AudioPid 3003 | SAT_Position 90
[EMU_MOD] main ****> biss_act = 0
[EMU_MOD] Take_ecm_pid_for_emu: SteamID = 0, Req_CAS_id = 0x0, Req_Prov_id = 0x0, Act_CA_CNT = 1 [PMTCasIDNum:3]
[EMU_MOD] main ****> ecm_pid = 0x67
[EMU_CTRL] main: Nothing! Valid EMM PID..[Request_CAS_id[0]=0x0000
[EMU_MOD] Emu_CallBackECM: Emu_CallBackECM : Emu_No = 0 <<< Channel_change=0 ****>
[EMU_MOD]-->EMM_ECM_ACT is 0
<<< OD :: Module Name MultiCAS | Ver 1.57E-D04[with LS] | Date 2009-09-05 ****>
[EMU_MOD] Emu_Act_ECM**** Thu Oct 1 16:12:49.919 <SteamID:0> emu_card_mode = 0[emu_card_mode_emm=0]
[EMU_MOD] Emu_Act_ECM: do_ecm = 0 || ca_system_id = 0x622
[EMU_MOD] Emu_EnableMode: SteamID = 0 Act_CA_Count = 1 [Request_CAS_id = 0x0]
[EMU_MOD] Emu_EnableMode: ----- nPMT[SteamID:0].PMTCasIDNum = 3 -----
********>[cat_arrive is 1] Now Try to act about CAT...
CheckBiss In>Service ID 3503 | VideoPid 2003 | AudioPid 3003 | SAT_Position 90
[EMU_MOD] main ****> biss_act = 0
[EMU_MOD] Take_ecm_pid_for_emu: SteamID = 0, Req_CAS_id = 0x0, Req_Prov_id = 0x0, Act_CA_CNT = 2 [PMTCasIDNum:3]
[EMU_MOD] main ****> ecm_pid = 0x6f
[EMU_CTRL] main: Nothing! Valid EMM PID..[Request_CAS_id[0]=0x0000
[EMU_MOD] Emu_CallBackECM: Emu_CallBackECM : Emu_No = 0 <<< Channel_change=0 ****>
[EMU_MOD]-->EMM_ECM_ACT is 0
<<< OD :: Module Name MultiCAS | Ver 1.57E-D04[with LS] | Date 2009-09-05 ****>
[EMU_MOD] Emu_Act_ECM**** Thu Oct 1 16:12:50.269 <SteamID:0> emu_card_mode = 0[emu_card_mode_emm=0]
[EMU_MOD] Emu_Act_ECM: do_ecm = 0 || ca_system_id = 0x9af
[EMU_MOD] Emu_EnableMode: SteamID = 0 Act_CA_Count = 2 [Request_CAS_id = 0x0]
[EMU_MOD] Emu_EnableMode: ----- nPMT[SteamID:0].PMTCasIDNum = 3 -----
********>[cat_arrive is 1] Now Try to act about CAT...
CheckBiss In>Service ID 3503 | VideoPid 2003 | AudioPid 3003 | SAT_Position 90
[EMU_MOD] main ****> biss_act = 0
[EMU_MOD] Take_ecm_pid_for_emu: SteamID = 0, Req_CAS_id = 0x0, Req_Prov_id = 0x0, Act_CA_CNT = 3 [PMTCasIDNum:3]
[EMU_MOD] main ****> ecm_pid = 0x1fff
[EMU_CTRL] main: Nothing! Valid EMM PID..[Request_CAS_id[0]=0x0000
Start Smart Card is initialized
Found ATR length = 0
--> CARD_INIT_OK...
[EMU_CTRL] main: START_SMARTCARD(sc = 0)
card_set_param param_status = 0 || Mode = 0
[EMU_CTRL] main: sc_card[0].casystemid = 0x0000
[EMU_CTRL] main: STOP_PMT_ECM [stream_id=0]
[EMU_CTRL] main: ************ STOP_CAT_EMM [stream_id = 0] <<<<<<
[EMU_MOD] main: START_PMT_ECM(sequence = 8)
[EMU_MOD] Take_ecm_pid_for_Card: SteamID = 0 | Card = 0 | pCard_CAS_id = 0x0
[EMU_MOD] Take_ecm_pid_for_Card: Mode = 0
[EMU_MOD] main: CARD:: stream_id = 0, ECM_PID = 0x1fff, SYSTEM_CAS_ID = 0xffff
[EMU_MOD] main Request_CAS_id[0] = 0x0
CheckBiss In>Service ID 30 | VideoPid 1300 | AudioPid 1310 | SAT_Position 90
[EMU_MOD] main ****> biss_act = 0
[EMU_MOD] Take_ecm_pid_for_emu: SteamID = 0, Req_CAS_id = 0x0, Req_Prov_id = 0x0, Act_CA_CNT = 0 [PMTCasIDNum:2]
[EMU_MOD] main ****> ecm_pid = 0x6e
[EMU_CTRL] main: START_CAT_EMM [stream_id = 0]
[EMU_CTRL] main: START_CAT_EMM :: New CAT.. [cat_ret:1]
********>[cat_arrive:0] last_cat_msg_size = 0x17[23]
[EMU_MOD] Emu_CallBackECM: Emu_CallBackECM : Emu_No = 0 <<< Channel_change=1 ****>
[EMU_MOD]-->EMM_ECM_ACT is 0
<<< OD :: Module Name MultiCAS | Ver 1.57E-D04[with LS] | Date 2009-09-05 ****>
[EMU_MOD] Emu_Act_ECM**** Thu Oct 1 16:16:36.297 <SteamID:0> emu_card_mode = 0[emu_card_mode_emm=0]
[EMU_MOD] Emu_Act_ECM: do_ecm = 0 || ca_system_id = 0x4ae1
[EMU_MOD] Emu_EnableMode: SteamID = 0 Act_CA_Count = 0 [Request_CAS_id = 0x0]
[EMU_MOD] Emu_EnableMode: ----- nPMT[SteamID:0].PMTCasIDNum = 2 -----
********>[cat_arrive is 1] Now Try to act about CAT...
CheckBiss In>Service ID 30 | VideoPid 1300 | AudioPid 1310 | SAT_Position 90
[EMU_MOD] main ****> biss_act = 0
[EMU_MOD] Take_ecm_pid_for_emu: SteamID = 0, Req_CAS_id = 0x0, Req_Prov_id = 0x0, Act_CA_CNT = 1 [PMTCasIDNum:2]
[EMU_MOD] main ****> ecm_pid = 0x6f
[EMU_MOD]-EMM- Take_emm_pid_for_Card: SteamID = 0 | Card=0 | pCard_CAS_id = 0x0
[EMU_MOD] main: CARD:: stream_id = 0, SC = 0, EMM_PID = 0x1fff, SYSTEM_CAS_ID = 0x0fff
[EMU_CTRL] main: Nothing! Valid EMM PID..[Request_CAS_id[0]=0x0000
[EMU_MOD] Emu_CallBackECM: Emu_CallBackECM : Emu_No = 0 <<< Channel_change=0 ****>
[EMU_MOD]-->EMM_ECM_ACT is 0
<<< OD :: Module Name MultiCAS | Ver 1.57E-D04[with LS] | Date 2009-09-05 ****>
[EMU_MOD] Emu_Act_ECM**** Thu Oct 1 16:16:36.626 <SteamID:0> emu_card_mode = 0[emu_card_mode_emm=0]
[EMU_MOD] Emu_Act_ECM: do_ecm = 0 || ca_system_id = 0x4ae1
[EMU_MOD] Emu_EnableMode: SteamID = 0 Act_CA_Count = 1 [Request_CAS_id = 0x0]
[EMU_MOD] Emu_EnableMode: ----- nPMT[SteamID:0].PMTCasIDNum = 2 -----
********>[cat_arrive is 1] Now Try to act about CAT...
CheckBiss In>Service ID 30 | VideoPid 1300 | AudioPid 1310 | SAT_Position 90
[EMU_MOD] main ****> biss_act = 0
[EMU_MOD] Take_ecm_pid_for_emu: SteamID = 0, Req_CAS_id = 0x0, Req_Prov_id = 0x0, Act_CA_CNT = 2 [PMTCasIDNum:2]
[EMU_MOD] main ****> ecm_pid = 0x1fff
[EMU_MOD]-EMM- Take_emm_pid_for_Card: SteamID = 0 | Card=0 | pCard_CAS_id = 0x0
[EMU_MOD] main: CARD:: stream_id = 0, SC = 0, EMM_PID = 0x1fff, SYSTEM_CAS_ID = 0x0fff
[EMU_CTRL] main: Nothing! Valid EMM PID..[Request_CAS_id[0]=0x0000
[EMU_CTRL] main: STOP_PMT_ECM [stream_id=0]
[EMU_CTRL] main: ************ STOP_CAT_EMM [stream_id = 0] <<<<<<
[EMU_MOD] main: START_PMT_ECM(sequence = 9)
[EMU_MOD] Take_ecm_pid_for_Card: SteamID = 0 | Card = 0 | pCard_CAS_id = 0x0
[EMU_MOD] Take_ecm_pid_for_Card: Mode = 0
[EMU_MOD] main: CARD:: stream_id = 0, ECM_PID = 0x1fff, SYSTEM_CAS_ID = 0xffff
[EMU_MOD] main Request_CAS_id[0] = 0x0
CheckBiss In>Service ID 3503 | VideoPid 2003 | AudioPid 3003 | SAT_Position 90
[EMU_MOD] main ****> biss_act = 0
[EMU_MOD] Take_ecm_pid_for_emu: SteamID = 0, Req_CAS_id = 0x0, Req_Prov_id = 0x0, Act_CA_CNT = 0 [PMTCasIDNum:3]
[EMU_MOD] main ****> ecm_pid = 0x68
[EMU_CTRL] main: START_CAT_EMM [stream_id = 0]
[EMU_CTRL] main: START_CAT_EMM :: New CAT.. [cat_ret:1]
********>[cat_arrive:0] last_cat_msg_size = 0x24[36]
[EMU_MOD] Emu_CallBackECM: Emu_CallBackECM : Emu_No = 0 <<< Channel_change=1 ****>
[EMU_MOD] Emu_CallBackECM: Emu_CallBackECM : Emu_No = 0 <<< Channel_change=1 ****>
[EMU_MOD]-->EMM_ECM_ACT is 0
<<< OD :: Module Name MultiCAS | Ver 1.57E-D04[with LS] | Date 2009-09-05 ****>
[EMU_MOD] Emu_Act_ECM**** Thu Oct 1 16:16:48.150 <SteamID:0> emu_card_mode = 0[emu_card_mode_emm=0]
[EMU_MOD] Emu_Act_ECM: do_ecm = 0 || ca_system_id = 0x624
[EMU_MOD] Emu_EnableMode: SteamID = 0 Act_CA_Count = 0 [Request_CAS_id = 0x0]
[EMU_MOD] Emu_EnableMode: ----- nPMT[SteamID:0].PMTCasIDNum = 3 -----
********>[cat_arrive is 1] Now Try to act about CAT...
CheckBiss In>Service ID 3503 | VideoPid 2003 | AudioPid 3003 | SAT_Position 90
[EMU_MOD] main ****> biss_act = 0
[EMU_MOD] Take_ecm_pid_for_emu: SteamID = 0, Req_CAS_id = 0x0, Req_Prov_id = 0x0, Act_CA_CNT = 1 [PMTCasIDNum:3]
[EMU_MOD] main ****> ecm_pid = 0x67
[EMU_MOD]-EMM- Take_emm_pid_for_Card: SteamID = 0 | Card=0 | pCard_CAS_id = 0x0
[EMU_MOD] main: CARD:: stream_id = 0, SC = 0, EMM_PID = 0x1fff, SYSTEM_CAS_ID = 0x0fff
[EMU_CTRL] main: Nothing! Valid EMM PID..[Request_CAS_id[0]=0x0000
[EMU_MOD] Emu_CallBackECM: Emu_CallBackECM : Emu_No = 0 <<< Channel_change=0 ****>
[EMU_MOD]-->EMM_ECM_ACT is 0
<<< OD :: Module Name MultiCAS | Ver 1.57E-D04[with LS] | Date 2009-09-05 ****>
[EMU_MOD] Emu_Act_ECM**** Thu Oct 1 16:16:48.516 <SteamID:0> emu_card_mode = 0[emu_card_mode_emm=0]
[EMU_MOD] Emu_Act_ECM: do_ecm = 0 || ca_system_id = 0x622
[EMU_MOD] Emu_EnableMode: SteamID = 0 Act_CA_Count = 1 [Request_CAS_id = 0x0]
[EMU_MOD] Emu_EnableMode: ----- nPMT[SteamID:0].PMTCasIDNum = 3 -----
********>[cat_arrive is 1] Now Try to act about CAT...
CheckBiss In>Service ID 3503 | VideoPid 2003 | AudioPid 3003 | SAT_Position 90
[EMU_MOD] main ****> biss_act = 0
[EMU_MOD] Take_ecm_pid_for_emu: SteamID = 0, Req_CAS_id = 0x0, Req_Prov_id = 0x0, Act_CA_CNT = 2 [PMTCasIDNum:3]
[EMU_MOD] main ****> ecm_pid = 0x6f
[EMU_MOD]-EMM- Take_emm_pid_for_Card: SteamID = 0 | Card=0 | pCard_CAS_id = 0x0
[EMU_MOD] main: CARD:: stream_id = 0, SC = 0, EMM_PID = 0x1fff, SYSTEM_CAS_ID = 0x0fff
[EMU_CTRL] main: Nothing! Valid EMM PID..[Request_CAS_id[0]=0x0000
[EMU_MOD] Emu_CallBackECM: Emu_CallBackECM : Emu_No = 0 <<< Channel_change=0 ****>
[EMU_MOD]-->EMM_ECM_ACT is 0
<<< OD :: Module Name MultiCAS | Ver 1.57E-D04[with LS] | Date 2009-09-05 ****>
[EMU_MOD] Emu_Act_ECM**** Thu Oct 1 16:16:48.860 <SteamID:0> emu_card_mode = 0[emu_card_mode_emm=0]
[EMU_MOD] Emu_Act_ECM: do_ecm = 0 || ca_system_id = 0x9af
[EMU_MOD] Emu_EnableMode: SteamID = 0 Act_CA_Count = 2 [Request_CAS_id = 0x0]
[EMU_MOD] Emu_EnableMode: ----- nPMT[SteamID:0].PMTCasIDNum = 3 -----
********>[cat_arrive is 1] Now Try to act about CAT...
CheckBiss In>Service ID 3503 | VideoPid 2003 | AudioPid 3003 | SAT_Position 90
[EMU_MOD] main ****> biss_act = 0
[EMU_MOD] Take_ecm_pid_for_emu: SteamID = 0, Req_CAS_id = 0x0, Req_Prov_id = 0x0, Act_CA_CNT = 3 [PMTCasIDNum:3]
[EMU_MOD] main ****> ecm_pid = 0x1fff
[EMU_MOD]-EMM- Take_emm_pid_for_Card: SteamID = 0 | Card=0 | pCard_CAS_id = 0x0
[EMU_MOD] main: CARD:: stream_id = 0, SC = 0, EMM_PID = 0x1fff, SYSTEM_CAS_ID = 0x0fff
[EMU_CTRL] main: Nothing! Valid EMM PID..[Request_CAS_id[0]=0x0000