Technomate 6800/6900 super

**KnockJohn** · 29-07-2009, 10:28 PM

Thanks Johntee - I got there in the end.

On a different point I have noticed that Rai, mezzo and Equidia PRO are not clearing now. DK and Globo are fine as are **** channels (with card)

Any advice on the softcam would be greatfully received

**Giga** · 30-07-2009, 07:06 AM

Originally Posted by holmroad

I would have thought it common courtesy to explain this to everyone rather than throw us all in at the deep end?
It farcical!:respect-057:

Sorry:

while viewing press green button

https://www.satpimps.co.uk/showthread.php?t=113360 <= click here for the posting.

everyone is out on factfinding for this one?

**drahcirk** · 30-07-2009, 07:17 AM

dont understand that one, u did say in an earlier thread to use the green button, but its gone, thats how i knew about it from u giga ,strange,.

**Giga** · 30-07-2009, 08:14 AM

it is still there, if you follow the link in previous posting. I also have to find out how it works, no do***entation found for it, yet.

**holmroad** · 30-07-2009, 09:00 AM

@Giga:
Sorry mate but wasnt having a 'go' at YOU, but the ORIGINAL perpetrator of this file and its new features - something as important (?) as this surely needs some serious explanation?
So YOU are a great guy who obviously tries as hard as the rest of us to fathom things out!
Thanks again for all your recent input, much appreciated!:respect-067:

**Giga** · 30-07-2009, 09:05 AM

the c a r d s h a r i n g menu's
S e r v e r L i s t

When you selected edit:

You have now 6 filters for the C S where you can filter on c a i d and i d e n t:

to

I'm sure we get further guidance on what we can further discuss on this item or if this was the limit?

**Giga** · 30-07-2009, 09:13 AM

Originally Posted by holmroad

@Giga:
Sorry mate but wasnt having a 'go' at YOU, but the ORIGINAL perpetrator of this file and its new features - something as important (?) as this surely needs some serious explanation?
So YOU are a great guy who obviously tries as hard as the rest of us to fathom things out!
Thanks again for all your recent input, much appreciated!:respect-067:

I understood that, your not taking a shot at me. We are all in a gray area regarding these. Thanks to fellow members, I became aware this was arround and had a go at it. Hope you like the new screen captures.

**holmroad** · 30-07-2009, 09:48 AM

Cheers mate - only prob is I never WAS very good with the 8281 option, although I did get a few 'feeds' ok - but never very good ones, or for very long!:respect-055:

**Giga** · 30-07-2009, 10:18 AM

LNB measurement (4 possible):
select your satelitte (multifeed)
22Khz: OFF Polarization: V: 10.700 ~ 11.700 HHz

22Khz: ON Polarization: V: 11.700 ~ 12.750 HHz

22Khz: OFF Polarization: H: 10.700 ~ 11.700 HHz

22Khz: ON Polarization: H: 11.700 ~ 12.750 HHz

The frequency range displayed is determined by a transponder list of a satelitte/satellite position.

**holmroad** · 30-07-2009, 11:19 AM

Thanx for all that mate - maybe you can PM me when you actually get one to work - with the settings etc?:respect-067:

**jblo** · 30-07-2009, 11:25 AM

hi

can anyone tell me how to get 8281 to work. I've connected up using a RS3232 cable and then I'm lost. I know I'm thick......alittle help would be appreciated.

Cheers

jblo

**drahcirk** · 30-07-2009, 12:40 PM

isthat an ethernet cable mate? and its nought to do with being thick jblo, were all trying to get to grips with this one, i dont know where host is yet ,.,.

**Giga** · 30-07-2009, 12:59 PM

protocol used: only N e w c a m d so you need details for that one:
ID = u s e r n a m e or l o g i n
password for that s e r v e r
D E S - K E Y needed to (en/de)c r y p t the trafic. That is all i figured out.
I think you can find additional information here:
Ethernet & Serial Treat <= click on there

KEEP in mind forum rules:
...

3) no discussion of any SKY TV hacks , or cable tv hacks , dboxes or any cable equipment whatsoever or of any forums that have that information on them
...
9) NO card share server requests.

Please do not post requests for card sharing servers etc
Any requests will be removed and the ppl involved banned.
Technical discussion on CS is ok
...

**drahcirk** · 30-07-2009, 01:11 PM

thanks g, i think i was being a bit naive b4 asking for a fta ser, dont think theres such a thing is there????:biggrinjester:

**jblo** · 30-07-2009, 01:46 PM

Hi

Thanks for your help so far. I was using the wrong cable. I now have an ethernet cable from stb to laptop. But still can't get connected. I try connecting and it stays disconnected.

Any further help will be appreciated

cheers

jblo

**Giga** · 30-07-2009, 02:51 PM

Originally Posted by johntee50

Menu
Instalation
Motorised Settings
Yellow button

that would be the Satfinder, the Analyzer can be accessed direct while viewing a channel by pressing the green button. Has some other functions available.

**Giga** · 30-07-2009, 03:07 PM

Originally Posted by jblo

Hi

Thanks for your help so far. I was using the wrong cable. I now have an ethernet cable from stb to laptop. But still can't get connected. I try connecting and it stays disconnected.

Any further help will be appreciated

cheers

jblo

If you go from laptop to the stb without passing a router or switch, you should use a crossover cable <= read here

**Giga** · 30-07-2009, 04:31 PM

if using a router:
DHCP usage <= click here
gateway, subnet mask, ... <= click here

**johntee50** · 30-07-2009, 04:49 PM

Connecting the STB direct to the router via ethernet cable only seems to work on connections number 1 to 4. I've tried several combinations of connections in tne various boxes, but only 1 to 4 seem to connect. The connections from 5 upwards may have to go through a computer, as you said earlier. Still a learning curve on this one. Can't seem to find any info on it anywhere. I'll keep plugging away.

Regards, JT.