Technomate 6800/6900 super

[bob]

New update for Technomate 6800/6900 super DigiTV AU, ******** Analyzer. Farmware 687p

[holmroad]

Yes - latest patch seems to be working perfectly so far - except the DigiTv AU has not yet been tested of course!
Not really quite sure how to use the new spe ct r u m analyser - assume its for accurately locating satellites!:number-one-043:

[drahcirk]

loaded new file yesterday ,and some pretty weird stuff in 8281, dont know what thats about,???/

[holmroad]

loaded new file yesterday ,and some pretty weird stuff in 8281, dont know what thats about,???/

Havent really played about with it yet - will have a look at it later!:respect-050:

[Giga]

Yes - latest patch seems to be working perfectly so far - except the DigiTv AU has not yet been tested of course!
Not really quite sure how to use the new spe ct r u m analyser - assume its for accurately locating satellites!:number-one-043:

Could use this to test cable and LNB('s): loss of some frequencies.
Think you might need a prefabricated lab measuring grade sat cable for the lnb testing?

[holmroad]

So maybe its more for satellite engineers' setting up use?:respect-046:

[drahcirk]

got 4 up on yellow, how does that compare to urs h,.

[Giga]

if you are talking about the analyzer?
you should not have a sharp drop somewhere, could indicate some frequencies are not getting thru. Default it shows the low frequency using the 22Khz switch (ON/OFF), it shows the upper frequency of that lnb.
it shows sometimes in light blue, anyone have a clue what the difference is between yellow and light blue bar?
Anyone already found some instructions on this beauty?

[drahcirk]

in the menu, what does host relate to ,any idea,

[RABBY]

Just installed [ Firmware 687p ] As for the [ Analyzer ] Looks to me [ Yellow ] No Signal ??[ Light Blue] Good Signal ?? But I have Alse a [RED ]Bar ? Fook Knows what that is ??LOL:banghead:


P.S [ 8281, ] Lost with that one as well??

[Giga]

[ 8 2 8 1, ] Lost with that one as well??

well somewhere there, look at the bottom of the screen for getting in the filter screen where you can enter c a i d and i d e n t of the provider for the c a r d s h a r i n g
Think this only passes the correct demands to the c a r d s e r v e r and not passing incorrect requests from other providers. Also read this thread: Ethernet & Serial Treat

[johntee50]

8281 now shows 24 possible connections, but I can only get numbers 1 to 4 to actualy work. Do we still have only 4 usable connections ?

Regards to all, JT.

[Giga]

8281 now shows 24 possible connections, but I can only get numbers 1 to 4 to actualy work. Do we still have only 4 usable connections ?

Regards to all, JT.

could be a difference when used with serial or ethernet? think this was a fix for serial having working 4? I'm not in to this C S thing.

[Giga]

Astra 2 & Eurobird 1
Yellow: signal received
Light-blue: frequencies in the transponderlist
Red: current frequency
Green: lock frequency



1 West
Signal drop: LNB skew? Not used frequency? Bad LNB or cable?


normal signal?

red bar:


SVHS captures

[drahcirk]

my 28s the same as urs g, only mines a bit lower the rihgt hand side yellow that is,.

[Giga]

most likely, different LNB, different cable type and length and alligment of the dish.
TDS 110, ALPS twin BSTE5-101B, 30 meters Hirshman KOKA 799 & Nedis 1.0 4-way DiSEqC switch.

[KnockJohn]

Guys, How do you get to the analyzer?

[johntee50]

Menu
Instalation
Motorised Settings
Yellow button

Regards, JT.

[holmroad]

I would have thought it common courtesy to explain this to everyone rather than throw us all in at the deep end?
It farcical!:respect-057:

[Giga]

I would have thought it common courtesy to explain this to everyone rather than throw us all in at the deep end?
It farcical!:respect-057:

Sorry:

while viewing press green button

https://www.satpimps.co.uk/showthread.php?t=113360 <= click here for the posting.

everyone is out on factfinding for this one?