I wonder if any of you very helpful 8k experienced guys have any ideas on my sat positioning problems? I am using:

  • Nabilo Pureflash + Barry Allen
  • Nabilo Blackhole (running)
  • CCcam 2.1.2

On Tuner ‘A’ (Motorised) the Sat positioning menu is almost unusable in as much as:

  • 28e on a fixed Zone 2 dish shows 73% signal. The 7020 shows 92%.

  • It only moves the dish to find a satellite when it wants to.

  • Will only lock onto 28e (fixed dish Tuner ‘B’) and 13e (Motorised Tuner ‘A’) Will not lock onto 19e or 16e. Have not tried the rest up to 1w yet.

  • Transponder details entered for satellite required defaults continuously to a non-existing transponder on19e.

  • The manual transponder scan finds nothing even when locked on to a sat.

  • The Automatic Scan will scan 13e first with only half the transponders scanned in, try to do19e next (Sat not stored yet as it wont lock on) and 28e last (not stored either as a static dish is installed on 28e (Tuner ‘B’).

  • Blackhole boots up to a black/grey screen with ‘starting Enigma2’ message which sometimes just sits there until I manually select a channel which then works. Is this normal?

I am religiously following Oldfarts excellent sticky for instructions and settings including the bug re-boot sequence between sats.

Thanks,

Dave