got box back y/day, all working fine now, 8days to send my box back, enuff moaning, still cant see how to enter 8281 in, tried it from the start ,wont enter in biss, errrrrr help,
got box back y/day, all working fine now, 8days to send my box back, enuff moaning, still cant see how to enter 8281 in, tried it from the start ,wont enter in biss, errrrrr help,
these tricks only work if the firmware is a patch, no patch no tricks.
Menu: submenu: System Information no p after the S/W version = not patched. When it shows the technomate logo in the menus: not patched! first load patch.
Code:https://www.satpimps.co.uk/showthread.php?t=92418
yes it is 679p,
when viewing on any channel and you enter 8 2 8 1 it should get you in the C S settings menu. Check if patch is on. goto menu to submenu system information. you should see these:
[C A S menu] [B I S S menu], if patch is not active press this sequence 2 0 0 4
B I S S menu on any channel: 8 2 8 0
C A S menu on l o c k e d: channel: [m u t e] [e x i t]
where [ ] represents the remote button
giving in the sequence should be rather fast, so you see in the top right hand corner the channel number
Last edited by Giga; 16-07-2009 at 09:57 AM.
yes, :respect-061:
in web settings, keep getting,network error, any input please g,
Last edited by drahcirk; 16-07-2009 at 01:37 PM.
@ drahcirk.
Hope you have lots of cheer this time. and no more serious problems. Good luck to you m8. :cheers2:
I suppose you have the TM hooked-up in your local computernetwork with straight (not crossover) ethernetworkcable Cat5:
to the router and the router is setup to distribute IP addresses.Code:http://en.wikipedia.org/wiki/Category_5_cable
IN the TM menu go to System Settings and submenu IP settings there you would find this setting:
DHCP usage = Off change this to On
Press the Red button to scan. If all is well the fields should be completed.
for usage on 8 2 8 1 I have to point you to this discussion:
Ethernet & Serial and hope you can figure this one out.
wow, thanks g, so much to learn, gonna give it a rest tonite me poor little brains hurting, still couldnt get it to connect, will try again tomorrow thanks,.:respect-037:
meant to ask, is there a free easy server i can put in to test my settings on?
no i mean a server free to everyone, anyone just to test on,
can a mod delete my post if iv done wrong please,
Last edited by drahcirk; 16-07-2009 at 07:39 PM.
can someone tell me if , in ip settings, should ip addy, be the same as gateway please,.
gateway should be address of the router: it is the gate to the WAN (Wide Area Network) in a normal home network.
In my case this would be 172.19.3.1.
In XP when you open the My netwerk locations and then select on the left hand side Show network connections. It will show the available network connections like LAN, Wireless, 1394 , ...
If you use LAN (cable) or Wireless right click on that icon for that connection and select in the popup menu Status Top Left corner you have 2 tabs, select the Support (or simular). this window will now show:
Address type (address type DHCP assigned) (router provided)
IP-Address: 172.19.3.3 (address for computer)
Subnetmask: 255.255.0.0 (must be the same for all devices in your home network. Could be 255.255.255.0 or 255.0.0.0)
Standard-gateway: 172.19.3.1 (address of gateway used)
all these addresses are mostly different and given by the router in your home network.
Last edited by Giga; 17-07-2009 at 05:22 PM.
cant believe my bad luck with these t/mates, me card reader just packed up on me 5400ci, thats both cam and card reader, box is about a year old, one crap box, dont know what to get to replace it,.forgot to say iv still got 6900 super,.
electronicslost the last couple of weeks 2 ADSL modems, outside DVB antenna with amplifier 20 db and a 8 port switch
Last edited by Giga; 31-07-2009 at 09:23 PM.
sorry too hear that g, and im moaning,.
Posting Permissions
Reply With Quote
Bookmarks