Results 1 to 3 of 3

Thread: ***** enigma 1hd...out!!!

  1. #1
    V.I.P pipino's Avatar
    Join Date
    Dec 2004
    Posts
    598
    Thanks
    1
    Thanked 4 Times in 2 Posts

    ***** enigma 1hd...out!!!

    for all Cuberevo/IPBOX HD owners ...best regards

    _http://www.upload-drive.com/file/243/AB-Enigma1HD-120609beta-rar.html

    AB ENIGMA

    AB Enigma1HD_9xxx_120609beta

    This is Beta version of AB Enigma1HD for AB IPBox 9000HD/900HD/910HD and 91HD

    How to install:
    - unzip downloaded file to your PC
    - Copy file from your PC into USB flash memory and rename it into "usb_update.img"
    - IMPORTANT: Use "Safety remove USB device" function before disconnecting your USB flash memory from PC !
    - Turn off your receiver (Standby+OK on front panel) and connect USB memory to USB (host) connector on your receiver.
    - Press and hold Standby on front panel until "BOOTING" message appears on display,
    press Up button . "USB UPGRADE" message should appear on display of your receiver - software update performs automatically.
    - Wait until DONE message appears and restart your receiver.


    How to install E2 HD (USB stick version) via internet with E1 HD installed inside box (Multiboot function):
    - connect USB flash memory to receiver and formatt it to ext3
    - go to Menu - Setup - System settings - Harddisc setup - line "connected"and make sure if USB is mounted to /hdd or /mnt/sda (if you don΄t have installed HDD) or to /mnt/sdb (if you have installed HDD)!!!
    - press blue button and go to "tarx", press OK, and choose "Download Addon". You will see "Enigma2.sda" and "Enigma2.sdb" files for each model of HD boxes.
    "Enigma2.sda" - choose only when you don΄t have installed HDD
    "Enigma2.sdb"- choose only when you have installed HDD
    - after choosing correct file, download will start and after that confirmation window will appear - press OK on "yes"
    - when you will see window with "OK", you have successfully installed E2 HD on USB
    - if you want run E2 HD just turn box off (Standby+OK on front panel),that press standby button and press and hold number 2 or 3 (it depends of installed HDD)
    number 1 - booting from internal flash
    number 2 - booting from sda
    number 3 - booting from sdb
    number 4 - booting from nfs
    number9 - booting from set up enviroment 192.168.1.25 ipaddr,
    192.168.1.102 server ip, nfsroot
    /home/ipbox/rootfs


    This can be helpfull:
    - IMPORTANT: By manual searching of channels ever press "retune" after inserting all parameters.
    This behavior differs from original E1, so don't forget about it when you need to do manual scan
    - In Expert setup you can find "User reset" - this returns box to first setup with basic setting for 4 satellites
    - In menu "Common Interface" you can find this: "can handle two services" - when you marked it to on, it is possible one scrambled channel record and one scrambled channel from same TP watch.
    Note: this function must be also supported by CAM module!(e.g.Cryptoworks from Mascom supports this)
    - If use 720p or 1080i mode with teletext, after teletext switch on, press Menu button and activate "true type fonts" item.

    Please note that this is E1 HD, so in IP9000HD is supported only first tuner.

    Known issues:
    - DVB-C tuners not supported
    - internal card readers don΄t work (external USB card readers work)
    - works upper CI slot only, after inserting CAM module you have to restart it in menu of box. After every restarting of box you have to put out CAM from box and put in to box and reset CAM in menu of box.
    - DVB and TXT subtitles are not working
    - problem with formatting some 3,5" HDD΄s
    - some bugs by playback recordings from HDD
    - it is not possible timer recording from EPG
    - SD menu graphic supported only
    - installed games don΄t work in 720p and 1080i mode. (work in 576i and 576p mode)
    - signal indicators don΄t work
    - in some situations box doesn΄t present any channels, need reinsert CAM and reset CAM in Common Interface menu

    NOTE: Source code of AB Enigma1HD will be released ASAP. Stay tuned

  2. #2
    V.I.P catseye's Avatar
    Join Date
    Dec 2004
    Posts
    2,562
    Thanks
    4,534
    Thanked 6,189 Times in 1,180 Posts
    Here is the file

    Thanks to Abc*m for this & to the Sifteam who started the ball rolling

    Remember to use E1 settings files not E2!

  3. #3
    Verified Registered User
    Join Date
    May 2007
    Posts
    59
    Thanks
    4
    Thanked 0 Times in 0 Posts
    Hi,

    Any adavantage of using E1 over E2 image . I will stick with E2 image as running 9000HD so E1 will only do one tuner.

    Cheers
    Last edited by daxv8; 16-06-2009 at 11:34 PM. Reason: spelling

Similar Threads

  1. anyone tried enigma on kathrein?
    By halfax in forum HD Satellite Receivers Discussion
    Replies: 2
    Last Post: 11-05-2009, 01:02 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •