It's no longer available for online download/upgrade . Considered 2 buggy , maybe .
It's no longer available for online download/upgrade . Considered 2 buggy , maybe .
Not sure why I am using it and had no real issues.
Yoda
Apparently it was too buggy and will be back up again late this week with (hopefully) all bugs sorted.
Just tried downloading again. Still booting into Settings so regressed it straight away.
MGcamd does work. The rest is OK, plus DiSEqC 1.1 is NOT yet fully implemented!!! Sadly...Code:http://www.myazbox.de/database/bugtracker/bugtracker0-9-1868.htm
We wait a bit longer and give the correct feedback...
0.9.1868 is available from the AZ Update List again. (setup information on the AZbox HD)
Diseqc 1.1 is fully implemented (committed and uncommitted, command order too)
Go to TV Channel -Antenna Setup, Diseqc, shortcut with left arrow to Combination, press OK and see the miracle. It is an intelligent solution.
YES, YES, YES, YEEEEESSSSSSSSSSSSS!!!!!!!!!!!!! :king-041: :respect-061: :respect-048:
OK, 8in1 older switches [v. 1] are now catered for, too.
Here is how I did it:
HOME button on your remote -> Settings -> TV Channel -> Antenna Setup -> DiSEqC -> hit the left arrow to get to the option named Combination -> press OK on your remote, then set it all up for your x amount of LNBs.
I have 8 LNBs on a toroidal dish, with an 8in1 switch, so here is how I got them all working [the first time, hehe!!], i.e. the winning combination for AZbox HD is:
Sat postion 1 = [I reversed the Command Order to] Uncommit./Commit. + [Committed DiSEqC] Switch A + [Uncommitted DISEqC] Switch 1
Sat postion 2 = Uncommit./Commit. + Committed DiSEqC Switch B + Uncommitted DISEqC Switch 1
Sat postion 3 = Uncommit./Commit. + Committed DiSEqC Switch C + Uncommitted DISEqC Switch 1
Sat postion 4 = Uncommit./Commit. + Committed DiSEqC Switch D + Uncommitted DISEqC Switch 1
Sat postion 5 = Uncommit./Commit. + Committed DiSEqC Switch A + Uncommitted DISEqC Switch 2
Sat postion 6 = Uncommit./Commit. + Committed DiSEqC Switch B + Uncommitted DISEqC Switch 2
Sat postion 7 = Uncommit./Commit. + Committed DiSEqC Switch C + Uncommitted DISEqC Switch 2
Sat postion 8 = Uncommit./Commit. + Committed DiSEqC Switch D + Uncommitted DISEqC Switch 2
It really seems to be the "intelligent solution", as it is touted!!!!! I just thought a little bit [and I am NOT an expert!!!], then made a few choices and voila! They were working!!!!
One great step forward for AZbox HD, as many types of HW are now "covered"!!! BRAVO!!!!!!!!!!!!!!!!!:respect-013:
Last edited by goran; 07-05-2009 at 10:48 PM.
Bookmarks