Stuck on loading

**ipuk** · 05-04-2009, 10:13 AM

Hi Guys,

Just received my AZBox HD Elite, when i turn it on it gets stuck on Loading...

Any ideas?

cheers

Ian

**valerica** · 05-04-2009, 10:31 AM

Use emergency procedure from here :
https://www.satpimps.co.uk/showthrea...ight=emergency

Cheers ,
Val .

**ipuk** · 05-04-2009, 03:58 PM

Mate,

You are a star!

Cheers

Ian

**ptr** · 24-05-2009, 07:05 PM

I've use emergency flash procedure but without success. the receiver is just new. just unpacked it from the original box switch on for the very first time it stays on Booting all the time. Can anyone help

**sofrenic** · 24-05-2009, 07:16 PM

Put USB in Azbox HD Turn Of Power and then turn on.
You get UPGRADE scren then select option 1. USB and booting start.

When finish proces 1-4 you get seam scren again and then you select option 5. Boot without udate

**Carp95** · 24-05-2009, 08:36 PM

@sofrenic:

Please explain wright:

When in upgrade screen first select option 4 ( format applecation area) and then option 1 ( upgrade firmware )

**ptr** · 24-05-2009, 09:46 PM

I've done that but nothing is working. usb does not even lit and AZBox still booting.

**cibernauta** · 24-05-2009, 09:46 PM

If the display goes ....... BOOTING... can not access the usb.

**cibernauta** · 24-05-2009, 11:36 PM

If the STB is in BOOTING not recognizing the usb.

**Rhodes** · 25-05-2009, 03:29 AM

Do the following:

On the remote control press exit, left button, and turn off (by remote control).

**slegs** · 25-05-2009, 09:19 AM

When stuck on booting (with the USB key in the port with patch.bin) prss the OK button on the front of the box a few times. This forces the box to read the USB.

**goran** · 25-05-2009, 10:08 AM

Maybe read the Sticky threads? Might be there for a reason...

**ptr** · 25-05-2009, 10:56 AM

Done all the above AZBOX HD Premium still stuck on Booting. USB does not lit at all.

**hanswurscht** · 25-05-2009, 12:20 PM

maybe incompatible Stick?
Wrong format?

**pr2** · 25-05-2009, 01:05 PM

- Do you try with another USB stick brand?

- Is your stick formatted in FAT32 with no other files on it?

- Do you try on the back USB just in case?

- Don't you misconnect the HDD while installing it and blow the USB and the DOM power supply?

**iko** · 25-05-2009, 04:45 PM

post it back and ask for repair or replacement with the good working one if it's brand new box and never worked for you...
good luck

**sofrenic** · 25-05-2009, 05:14 PM

Your USB most be in FAT file sys.

My Computer/right click/Manage/Storage/Disk Managament/Right click to USB and format in FAT

Then you put pach.bin in USB. POver OF/Pover ON
1.USB
.,,.,

**pr2** · 25-05-2009, 05:34 PM

Hello,

Before sending back for repair, open the box and check all the cable connection. Simply push on the cable connector just in case there was a problem during transport and give it a try again to update it.

If it still fails with all the tip published here, then you will have to return your box for repair.

Do you already sucessfully start your box or not?
What is the last operation you do before the box get stuck?

Just in case of, download this firmware via Firefox (not IE please!).

http://azupd.com/0.9.2032/patch.bin

Pr2

**cibernauta** · 26-05-2009, 03:35 PM

My usb is formatted in fat32, and there are several firms that I gave to azbox elite, and now with the firm the first premium is put on the same usb.

What is the last operation you do before the box get stuck?

I go to work........ and when go home.....BOOTING.

**pr2** · 26-05-2009, 03:43 PM

Hello,

If you really can't sort it out with all the explanations here then return the box for repairs.

Looks like the USB and DOM power supply is defective.

Pr2