Latest drivers DM8000HD 02/01/2010

[sonic1]

Here is the info about dreambox-dvb-modules-dm8000-2.6.12-5.1-brcmstb-dm8000-20090403.tar

- Fixed data corruption when BSBE1-D01A tuner was used in Slot-C
(fpga ver 0x2a)
- Fixed some radio services which had no valid PCR
- Improved IR reception: There should be no spurious zero-packets
anymore

ftp to:-

lib/modules/2.6.12-5.1-brcmstb-dm8000/extra/

Chmod 644

Reboot box

Make sure you put it in the flash image

[tomcat415]

ipk file dreambox-dvb-modules_2.6.12-5.1-brcmstb-dm8000-20090403-r0_dm8000 http://dreamboxupdate.com/opendreambox/1.5/dm8000/experimental/dreambox-dvb-modules_2.6.12-5.1-brcmstb-dm8000-20090403-r0_dm8000.ipk

[sonic1]

Latest drivers

[sonic1]

dreambox-dvb-modules_2.6.12-5.1-brcmstb-dm8000-20090602-r0_dm8000.ipk

[sonic1]

Update 12.06.2009

[sonic1]

- DVB-S2 on Alps-Tuner with SR=30000 on DVB-S2 transponder was fixed,
- vtuner: POLLHUP was changed to POLLIN, if you're using this,
please update your tool,
- vtuner: PVR playback now works together with vtuner
- DM8000/DM800: muted some noises while zapping channels. Due to a
workaround for Harman-Kardon-Receivers, noises when switching between
DTS and PCM might occur, we are investigating for a better fix.
- DM8000: ALSA playback was improved,
- 2D accel now support palettes - this will fix DVB Subtitles on HD-
Skins with recent enigma2,
- "dvbnet" was disabled previously, and is enabled now.
- DM800: some more checks

[sonic1]

changelog driver 07.07.2009

dreambox-dvb-modules.bb: update dm800 and dm8000 drivers
dm8000 changes: - fixed no more working ts playback after MPEG4 Part2 (Divx) playback - CI fix for Dre Crypt Module dm800 and dm8000 changes: - /proc/stb/audio/audio_delay_pcm/bitstream is now working in both directions.. negative offset now delays video

[sonic1]

dreambox-dvb-modules.bb: update dm800 and dm8000 drivers
- better H264 compatibility ... (higher bitrates, more reference frames) - dm800 fix for playback of MPEG2 HD 1080p (converted H264 file with mkv2vob was not working.. green screen) - add VTUNER_SET_FRONTEND_INFO ioctl (ioctl id 6) to set a struct dvb_frontend_info* to set frontend capibilities and frontend type THIS DRIVERS NEEDS AT LEAST SECONDSTAGE 74 !!!!!!!!!!!!

[oldfart]

Of course, If you have OozoOn and update it, these files will now be installed!

[NoMaD]

update drivers 22.08.2009
dreambox-dvb-modules.bb: update dm8000 drivers ... fix a deadlock in 4501 driver when tune to a invalid DVB-S2 FEC

[sonic1]

dreambox-dvb-modules_2.6.12-5.1-brcmstb-dm8000-20090907-r0_dm8000

dreambox-dvb-modules.bb: update dm800 and dm8000 drivers

fix 1080p24/30 synchronisation problems via AV Receiver

fix 720p24 output via dvi

fix loss of dvi(hdmi) audio on framerate change

another small deinterlacer auto handling fix

improved locking times for alps-bsbe1-c/d01a tuner

fix synchronisation problems on scart output in some cases

[sonic1]

drivers (20090822 -> 20090910)

fixed:
- deinterlacer handling in auto mode 2nd try
- 1080p24/p30 hdmi output via AV-Receiver
- 720p24 hdmi output

add:
- support for 4505/4506 tuner

[sonic1]

dreambox-dvb-modules.bb: update dm8000,

changes dm8000
------------------------
* fix strange audio noise on skip fast forward/backward
* improved position after seek/play transition a bit
* fix not working Gigaset Premium CI

[sonic1]

dreambox-dvb-modules.bb: update dm800/dm8000/dm7025 drivers

changes for all:

- buffer empty detection changes for /dev/dvb/.../videoX, audio0 and /dev/pvr (this is needed for current enigma2)

changes dm8000 and dm800:

- more acurate timestamp queries (fixes seeking in some conditions)

- video freeze fixes (this fixes black picture in timeshift start)

- faster audio/video resync in some playback conditions

[sonic1]

dreambox-dvb-modules.bb: update dm800/dm8000 drivers 16-12-09

changes all:
------------
* fixes for the new buffer empty / decoder finished detection

changes dm800/dm8000:
---------------------
* fix possible driver mem allocation problems
* more stable transition between different audio/video streamtypes (i.e. this fixes no more working mp3 output after playback a avi/mkv/mpg file)
* small fixes for more stable pcr/pts sync handling

changes dm8000:
---------------
* fix initialization of penthouse HD drecrypt CI

[juli13]

dreambox-dvb-modules.bb: update dm800 und dm8000 drivers

* small internal memory allocation speedup
* fix not working radio service with corrupt pcr again
* small change on alps_bsbe2 tuner 22Khz handling

[juli13]

dreambox-dvb-modules.bb:dm8000 drivers

changes
------------

* video and audio get pts ioctls now returns better timestamps in some conditions (this fixes skipping in radio ts recordings)

* work on ac3 -> pcm transition via spdif and hdmi ( this fixes sometimes not working ac3 -> pcm transition with some TVs / AV receivers)

[juli13]

24.03.2010

hopyfully fix locking problems since SMP changes (deadlock in some cases)

[sonic1]

For OE 1.6 not 1.5 so please check before you add these to your image.

[Melgas]

Dear Friends,
I've been making an urgent appeal.

I made this update the hardware drivers on my "DM8000HD DVR"
File: "dreambox-dvb-modules_2.6.18-7.4-DM8000-20120216-r0_dm8000.IPK"
Update DM500HD, dm800se, DM8000, and dm7020hd dm800 hardware drivers:
- Fixed overflow on this aspect ratio calculation Possible fixes wrong scaled content
- Fixed scale factor calculation for dm800 ie fixes wrong scaled IPTV services
- Fixed non transparent framebuffer bootup after this fixes not visible before bootlogo e2 starts on dm800

This update did not fix anything. Now I have these problems:
- Failure to accept access by DCC_E2 and Dreamset 1.44 v2.36 (x64).
- To accept the access DCC 2.96 and Dreamset v2.36 (x32).

Please, I need to get the original drivers for hardware to fix this update.

Hugs.