Results 1 to 3 of 3

Thread: TTDT Enigma2 image for the TF7700HDPVR

  1. #1
    V.I.P elgeneral's Avatar
    Join Date
    Jan 2009
    Posts
    66
    Thanks
    2
    Thanked 0 Times in 0 Posts

    TDT Enigma2 image for the TF7700HDPVR

    ..,,,uuuuuuux-
    .XJ$$$$$$$$$$$$$R"
    :<?$$$P???" ... uuuux ,ucdL
    '''''` :<$$$: .dWWW>:;$$::$$F":J$$"''
    ,uuuouuu, .uu xcd:x$u.:J$$$ :J$P9$>;$$F.<$$h=`?$h
    :$$$$$$$$$$b, .uz ucd xJ$$$:J$6d$$F':$$$F:J$P;3$>J$P.:3 $,,,;J$$E
    :d$$$$$$$$$$$$c::$$F;$$FJ$$P":<$$ $$P` :J$$$:J$P???$>$$??:?`???"
    ::?"'<Xio::??$$$>J$$ :t$P;$P` :3$$P$$u::$$$P:??' `?F'
    '' :d$$P `:9$$>$$F;J$><$C,,u;$$P:?$$h:3$$>
    :<$$$' <8$$>$$X<J$$:<$$$$F:??' `"":J$$$
    :3$$P :d$$$:$$$$$P `:' :<P???"
    ::$$$' .d$$$$'`?" '::::
    .:d$$6ud$$$$F
    .;cJJ$$$$$$$PF'
    ::9$$$$$$$PF"
    `'??""''
    ,,, ::::::::::::..
    ,z$$$$$ :::::::::::::::::.
    e$$$$$$$$ ::::::::::::::::::::
    d$$$$$$$$$$;`::::::::::::::::::::
    ::."$$$$$$$$$ :::::::::::::::::::::
    :::::."$$$$$$$ ::::::::::::::::::::
    ::::::::."$$$$$b ::''''''''':::::::'
    `:::::::::`$$P" . :''''<<<<<<;. `'
    `:::::::: "".,.----=--..`'<<<<<<;
    `:::'',-'` .::::::::::`'- `<<<<; .::.
    `,-`.::::::::::' .. `::. .:::::::::
    ,-'.:::::::::::' dMMMMMMx :::::` .`::::::::
    ,'.::::::::::::: dMMMMMMMMMM ``` JMMM `:::::
    ,'.:::::::::::' . MMP',ccc "MMM Mb MMMMM `:::
    ; :::::::::::' nM MM',$$$$$$b "Mb4M,M c,`? :'
    ; ::::::::::: xMMMMM'J$$$$$$$$b )MMMMM.`$$.
    ' :::`::::::: dMMMMM'J$$$$$$$$$$F MMMMMM $$$.
    :: <`::::: JMMMMM',$$$$$$$$$$$P MMMMMM $$$$
    `:::`bc,.. ,edMMMM $$$$$$$$$$$$F MMMMMM $$$$ .
    ` ,nMMMMMMMMTMMMM P""?$$$$$$$$".MTT4MM ?$$F;P""?x_
    ,d)MMMMMMP'dMMMMM $$$$$$P .cCc. $ cCc L~
    ,MMMMMMM ,c, 4MMr $$$$$ .CCCC> 4 CCC> L"
    P)MMMMM> $$?$ "MM $$$$" CCCCC' ,, CC> % `
    ' MMMTMMM `b $$c.?b $$$" `CCC'-""___,,,,,__
    M" `?, ??$c,,,,,,cc$7= _,cc$$$$PP****"??$$$$
    " `"b,_ "?$$$$$$$$$$P"" .. ,d"
    `?$b `,,,,,,.`;;;;;;'j"
    n ?$c`;;;;;;;`',;;; F
    ,;-;MM "$b;;;;;,,;;;'j"
    ,!!!!! MMMM,`?$c,_`` _,,cd'
    !!!!!!!; MMMMMMn, `****"''
    . !!!!!!!!!, `"TT';!!!!>
    ,;!!!> !!!!!!!!!!!!! `<!!!! !;,
    !!!!!!!!! '!!!!!!!!!!! !!! !!> !!!!!!;;

    ################################# ########################
    # #
    # Team Ducktales' Enigma2 image for the TF7700HDPVR #
    # #
    # #
    ################################# ########################

    The provided image is based on the Linux operating system and includes
    the Enigma2 PVR application. Please read this do***ent carefully before
    installing the image.

    Unsupported features and known problems
    ---------------------------------------
    - CAM slots are not supported yet.
    - The only supported tuner type is DVB-S2 CX24116/CX24118.
    - Timeshift does not work yet.
    - Rewind does not work properly. Sometimes enigma2 freezes when rewinding.
    "Jump back" can be used instead (see playback keys).
    - Samsung LCD TVs will probably have problems with the default resolution
    576i.
    - There might be no video on the FIRST (!) start after installation - reboot
    the box.

    DISCLAIMER
    ----------
    The software is provided 'as is' without warranty of any kind.

    Please consider that you may lose manufacturer's warranty when installing
    this image.

    This is an alpha image. That is some functions may not be available or be
    buggy (causing crashes/freezes or loss of data).

    The installation of the Enigma2 image formats (ext2) the internal harddrive.
    ALL FILES ON THE HARDDRIVE WILL BE LOST.

    Installation instructions
    -------------------------
    You will need either a USB stick or a USB harddrive with FAT32 filesystem.
    - Copy the files Enigma_Installer.tfd, uImage and rootfs.tar.gz to the USB
    device.
    - Attach the drive to the USB slot.
    - Open the Topfield firmware update menu and select the image file
    Enigma_Installer.tfd on the USB drive.
    - Start the firmware update from USB.
    - After about 6-7 minutes the installation should be finished.
    DO NOT REMOVE THE USB DEVICE UNTIL the INSTALLATION HAS FINISHED.

    During the installation the VFD shows the current installation step and
    error messages (if any):

    "9 USB STCK" mouting USB stick
    "8 HDD PART" partitioning HDD
    "7 HDD FMT" formatting HDD (root fs)
    "6 HDD FMT" formatting HDD (data fs)
    "5 HDD SWAP" creating swap
    "4 ROOT FS" installing root file system
    "3 LOADER" flashing U-Boot settings
    "2 KERNEL" flashing kernel
    "1 FSCK" checking file system
    "0 REBOOT" rebooting within 2 seconds

    It is recommended to attach a cable to the serial port and log the output in a
    terminal program (e.g. TeraTerm) during the installation and the first start.

    The USB filesystem should be writable to prevent infinite installation loop.
    (The file uImage is renamed to avoid the infinite loop.)

    The first start usually takes approximately 3 minutes due to creation of
    device nodes.

    Enigma2 can be removed by flashing a regular Topfield firmware image using
    standard tools like TFD-Down or VegaPack.

    First start
    -----------
    On the first start the Enigma2 interactively configures the video output to be
    used. The following options are available:
    - Component
    - HDMI
    - Scart
    - HDMI-PC
    Each connection type is switched on for 30 seconds. The VFD displays the
    connection type which is currently active. You can either wait until the
    connection type you want is displayed and your TV shows a picture or you
    can select the connection type with Up and Down buttons on the remote control.
    Confirm the desired connection type with the Ok button. After that you can
    proceed with the configuration supported by the configuration ******.
    The image contains a default channel table. If you want to replace it You can
    perform a channel scan later.

    Network configuration
    ---------------------
    The U-Boot settings contain the following configuration by default:
    MAC address 00:3e:9e:11:22:33
    IP address 192.168.178.100

    That is after booting the image you can login via telnet if your computer is in
    the same subnet.

    These values are set up by the U-Boot. You can temporarily change the values
    in Enigma2 menu "Settings/System/Network.../Adapter settings" or change the
    U-Boot parameters.

    Default U-Boot bootargs:
    ba1=console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=192.168.178.100:192.168.178.10 :192.168.178.10:2 55.255.255.0:tf7700:eth0ff nwhwconf=device:eth0,hwaddr:00:3e :9e:11:22:33
    mem=128m bigphysarea=4000 coprocessor_mem=4m@0x10000000,4m@ 0x10400000

    To change the IP addresses interrupt the U-Boot countdown and execute the
    following command with replaced IP addresses:
    TF7700> set ba1 'console=ttyAS0,115200 root=/dev/sda1 rw init=/bin/devinit ip=<own IP>:<server IP>:<DNS IP>:255.255.255.0:tf7700:eth0ff nwhwconf=device:eth0,hwaddr:00:3e :9e:11:22:33
    mem=128m bigphysarea=4000 coprocessor_mem=4m@0x10000000,4m@ 0x10400000'

    Please note that the setting has to be split in two lines to bypass the
    limitation of U-Boot. The second line must start with a white space. The
    string is enclosed in single quotes. Any change is temporary unless the
    settings are saved to flash using the command "saveenv". Before saving
    settings to flash you should test whether the kernel boots with your settings.
    Enter "boot" at the U-Boot prompt to start the kernel. (After testing the
    settings without saving them you will have to enter your changes again.)

    Playback keys
    -------------
    Play - shows the file list
    Yellow - pause/unpause playback
    Green - continue playback
    Red - jump to the beginning
    Blue - jump to the next bookmark
    1/3 jump 15 seconds backwards/forwads (configurable in the settings menu)
    4/6 jump 60 seconds backwards/forwads (configurable in the settings menu)
    7/9 jump 5 minutes backwards/forwads (configurable in the settings menu)

    Full key map can be found in the file /usr/local/share/enigma2/keymap.xml.


    Team Ducktales

    ********TeamDucktales_Enigma2_4_tf7700hdp vr.zip<<<<

    Code:
    http://www.megaupload.com/?d=Z6G2KCUI
    Last edited by elgeneral; 20-03-2009 at 10:58 PM.

  2. #2
    V.I.P dxdy's Avatar
    Join Date
    Dec 2004
    Posts
    437
    Thanks
    0
    Thanked 3 Times in 2 Posts
    Rapidshare

    Code:
    http://rapidshare.com/files/212142918/TeamDucktales_Enigma2_4_tf7700hdpvr.zip
    Last edited by dxdy; 22-03-2009 at 02:16 PM.

  3. #3
    Junior Member
    Join Date
    Feb 2009
    Posts
    12
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Any recent image for this receiver?

Similar Threads

  1. Nabilosat Enigma2 Black Hole-DM800 v0.6
    By sonic1 in forum Dreambox DM800HD
    Replies: 0
    Last Post: 29-12-2008, 10:06 PM
  2. Nabilosat Enigma2 Black Hole DM800 v0.5
    By sonic1 in forum Dreambox DM800HD
    Replies: 1
    Last Post: 11-12-2008, 05:53 PM
  3. Newnigma 2.1 Out with USB support
    By mini__me in forum Dreambox DM800HD
    Replies: 7
    Last Post: 26-06-2008, 08:53 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •