Results 1 to 6 of 6

Thread: How To Install Keys And Transponders?

  1. #1
    Junior Member
    Join Date
    Dec 2004
    Posts
    25
    Thanks
    0
    Thanked 0 Times in 0 Posts

    How To Install Keys And Transponders?

    I have the 900 HD Can install new images no probs but how do you install add-ons? Can the files be uploaded via a memory stick or do you need ethernet cable? Have tried via serial & PC Editor but no joy.
    Also, where do the files go? Do they have to be uploaded into a particular location?
    Trying to find info on this box is like pulling teeth. Beginning to think I have wasted my money.

  2. #2
    Member oulit's Avatar
    Join Date
    Dec 2004
    Posts
    86
    Thanks
    23
    Thanked 1 Time in 1 Post
    you need ethernet cable ,and you can upload via ftp.

    Do they have to be uploaded into a particular location?
    yes
    Also, where do the files go?
    emus /var/bin
    plugins /var/plug-in
    spftcam /var/keys
    Last edited by oulit; 09-03-2009 at 11:51 PM.

  3. #3
    Junior Member
    Join Date
    Dec 2004
    Posts
    25
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Hey Oulit. Thanks very much for taking the trouble to reply.
    I wonder if I might have a faulty box or lead. I have connected a crossed ethernet cable between the box and my laptop. I have manually entered the IP address, Subnet Mask and Gateway into the 900 from the manual (Auto DHCP just remains at zeros) but cannot get PC Editor or DCC to connect. Am I doing something wrong or do you think something is faulty?
    The amber "glimmer" from the ethernet socket in the laptop appears very intermittent. Should this be flickering constantly? DCC reports socket not connected. But my LAN connection reports 169.254.105.129
    I am struggling with this box without suspecting a fault too.
    Anyway, if this makes any kind of sense to you, I would appreciate your comments.
    I'll be back tomorrow if this box has not sent me completely loopy by then :-)

  4. #4
    Member oulit's Avatar
    Join Date
    Dec 2004
    Posts
    86
    Thanks
    23
    Thanked 1 Time in 1 Post
    bozz
    you need to configure laptop ip address ,and assign a fixed IP



  5. #5
    Junior Member
    Join Date
    Dec 2004
    Posts
    25
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Thans Oulit. Not had time to try anything yet but the penny is slowly beginning to drop. Thanks for the clues. I hope by next week I will be wondering why I thought this was so difficult.

  6. #6
    Junior Member
    Join Date
    Dec 2004
    Posts
    25
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Sorted!! Networking For Dummies was required :-)
    Now to see if the effort was worth it....

Similar Threads

  1. re TM 6800HD
    By rkbuttoo in forum 6000 series
    Replies: 22
    Last Post: 22-01-2009, 09:44 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •