Navcore v8.204

**Russell1** · 01-03-2009, 12:01 AM

If you try this make sure you have got a full working back up copy first !!!!!

I've just got his copy of Navcore v8.204 working on my Go500 with the latest v825.2157 UK & RoI map

Code:

http://www.megaupload.com/?d=OR4Z0E9U

Extract zip file to your PC - open folder named ' Copy Contents To Tomtom Memory ' and copy all files to a blank memory card (or internal memory). If you are using a unit with a different screen size to the Go500 you will have to replace the 3 .BMP files with copies from your unit (antitheft, lowbattery & splash). Next stage is to add the new map folder and then activate it using the easyusetool - when I did all this I used a memory card reader to do everything. When you first start up your unit it will take a few minutes to boot up - & will do this every time you remove memory card or connect it to your PC, so don't worry if it's not an instant start up.

**pau1777** · 01-03-2009, 11:26 AM

Hi m8,
Which tomtom units will this work on? I have been reading that this is a better Navcore than the 8.300 and 8.301.
I am looking to update my 520 and am not sure if I should go with this one or use the latest 8.301.
I have the 8.300 installed now and have problems with stuttering voices and bluetooth disconections.

**Russell1** · 01-03-2009, 06:13 PM

This one should work on the 520, if not then try upgrading with an official software from Tomtom & then patch it using this :-
https://www.satpimps.co.uk/showthread.php?t=99320

**wwe** · 12-03-2009, 03:09 PM

Originally Posted by Russell1

If you try this make sure you have got a full working back up copy first !!!!!

I've just got his copy of Navcore v8.204 working on my Go500 with the latest v825.2157 UK & RoI map

Code:

http://www.megaupload.com/?d=OR4Z0E9U

Extract zip file to your PC - open folder named ' Copy Contents To Tomtom Memory ' and copy all files to a blank memory card (or internal memory). If you are using a unit with a different screen size to the Go500 you will have to replace the 3 .BMP files with copies from your unit (antitheft, lowbattery & splash). Next stage is to add the new map folder and then activate it using the easyusetool - when I did all this I used a memory card reader to do everything. When you first start up your unit it will take a few minutes to boot up - & will do this every time you remove memory card or connect it to your PC, so don't worry if it's not an instant start up.

will this work with tomtom 1 or will i need the se version
hanks

wwe

**Russell1** · 12-03-2009, 10:05 PM

This is the SE version (already patched) & yes it should work.

**clotted** · 20-03-2009, 11:06 PM

I installed this on my tt300 but it switches off when I try to use postcodes.
Any ideas?

**lynxman** · 21-03-2009, 12:31 AM

switch the key board to qwerty should be fine

**Russell1** · 21-03-2009, 08:56 AM

Originally Posted by clotted

I installed this on my tt300 but it switches off when I try to use postcodes.
Any ideas?

As Lynxman posted - set keyboard to QWERTY
Also - set keyboard to use Small letters.

**parts** · 21-03-2009, 12:55 PM

I have this working on a Go 500 OK ,but I keep getting messages that I should update my software to better use my hardware .

A} is it true ? and

B) can I stop the nag screen

Chris

**little devil** · 21-03-2009, 01:51 PM

well done Russell1 for posting this got it working on my tomtom one thank you

**Coppull Buster** · 21-03-2009, 07:52 PM

Originally Posted by Russell1

If you try this make sure you have got a full working back up copy first !!!!!

I've just got his copy of Navcore v8.204 working on my Go500 with the latest v825.2157 UK & RoI map

Code:

http://www.megaupload.com/?d=OR4Z0E9U

Extract zip file to your PC - open folder named ' Copy Contents To Tomtom Memory ' and copy all files to a blank memory card (or internal memory). If you are using a unit with a different screen size to the Go500 you will have to replace the 3 .BMP files with copies from your unit (antitheft, lowbattery & splash). Next stage is to add the new map folder and then activate it using the easyusetool - when I did all this I used a memory card reader to do everything. When you first start up your unit it will take a few minutes to boot up - & will do this every time you remove memory card or connect it to your PC, so don't worry if it's not an instant start up.

What are the benefits of Navcore v8.204 with v825.2157 map? What extra features do you get, and could I use this on my TomTom One XL ?

**Russell1** · 21-03-2009, 08:31 PM

Don't know what features you get on your One XL, but with this version & the 825.2157 maps you get the IQ routes & ALG (lane guidance). What version of Navcore have you got on there now & is it the latest official version for your XL ?

**Coppull Buster** · 22-03-2009, 12:39 AM

It's Navcore 8.01 (official)..

So would I get IQ routes and ALG if I updated to Navcore 8.204 then ??

**Russell1** · 22-03-2009, 08:11 AM

Originally Posted by Coppull Buster

It's Navcore 8.01 (official)..

So would I get IQ routes and ALG if I updated to Navcore 8.204 then ??

Yes (but make a full back up copy first).

**Coppull Buster** · 22-03-2009, 03:27 PM

I've made a full backup & I've downloaded the updated version from the URL you kindly posted...

I have a busy week ahead, London monday & tuesday, Hull wednesday, then York thursday, so I wouldnt want to accidentally screw something up now, when I havent got time to sort it out.. I will have a play with it next friday when Im not going anywhere, lol..

Thanks again Russell1 (the tomtom guru) :respect-060:

**clotted** · 22-03-2009, 08:50 PM

Originally Posted by lynxman

switch the key board to qwerty should be fine

Done that and it works fine now. Thanks

**doct140** · 22-03-2009, 09:27 PM

working fine on xl
good job thanks to russel

**Coppull Buster** · 28-03-2009, 07:54 PM

Just tried it...

Made a back-up of my SD card, then formatted it. Then copied the contents of the Navcore v8.24 folder to the SD card. Then copied the UK map v825.2157 onto the SD card, then used easytools to activate it, everything appeared to go successfully, however when I put the card into my TomTom XL, it would only boot so far, then a screen appears saying "planning cancelled...", this stays on for about a minute then it reboots.. Keeps going round & round like that..!

Any ideas what Im doing wrong ?

**Russell1** · 28-03-2009, 08:02 PM

Did you replace the .bmp files from the above copy - the screen size on your XL is different to my Go500 ?
Did you try to copy the mapsettings.cfg file from your old map folder ? If yu did then try deleting it.

**Coppull Buster** · 28-03-2009, 08:25 PM

Yeah I replaced the .bmp files just like you said... and I didn't try to copy the mapsettings.cfg file from my old map folder..

***UPDATE***
Ive got it booting ok now, I think I messed something up with the ttsystem file, but its booting up ok now..

Going to have a play with it to see how it goes..