Bootloader modification?

[smogm]

Hello,

knows anyone which bootloader is used in the AZBox? Redboot or UBoot or something else?

On the AZBox Elite board, near the power pack are four not connected pins, which seems to be a internal rs232 port.



Connections from the white point (highest pin):
1. pin (white point) - VCC 3,3 V
2. pin - RX
3. pin - TX
4. pin - GND

Can someone connect these pins via a MAX232 with a serial terminal and making a boot log?

It should be possible to modify the bootloader, to boot from usb or network device (nfs).

http://www.nslu2-linux.org/wiki/HowTo/AddASerialPort

[nebu]

Is there already some do***entation (description/tutorial) released about the linux boot procedure on the AZbox (bootloader, settings....). Has already someone tried to build a customized linux kernel and is there a source for the kernel configuration (eg zcat /proc/config.gz) ? I would test this on my personal box if it would be there. I am still waiting :(

[netgic]

Bootloader ist Yamon.

We load a own Kernel last week.

Take a look to the Dev Board.

[goran]

Wow! Promising!

More teams writing would be good!!!

Especially if we could get Enigma 2 on it... somehow...

Plus, the latest kernel is not used by the official team, isn't it the case?

Good luck!

[nebu]

Where can I find the above mentioned development board?

[pr2]

Hello,

Here is an alternative developpers board:

h**p://www.azbox.hellfirenet.de/forum/index.php

Pr2