BBC Package (BBC HD, BBC One, BBC One HD, ITV1 HD Biss keys

Keys attached.
Key Formats Modified By kargo25 and Informed®™ ;)


THX TO STarTIMES BISS TEAM

Quote:

---

Originally Posted by manic01

Keys attached.
Key Formats Modified By kargo25 and Informed®™ ;)


THX TO STarTIMES BISS TEAM

---

managed to scan these in on 27.5w using my spiderbox but unable to open with the key

not sure if its the symbol rate causing the problem, or if they changed the biss key ?

Keys is good mate.

Make sure pids have scanned ok.
Make sure no freq the same as spider is funny with biss.

Incorrect info, sorry.

Quote:

---

Originally Posted by manic01

Heres how to do it on spider
As you all will know BISS keys are available for PLTV, Chelsea TV and NBA TV.
The only trouble is theses channels are all on the same frequency 11387 and you can't enter all the sets of keys at the same time (you can only open 1 at a time)
The way round this problem is to scan 11382, 11387 and 11392 and use 1 of the above channels for each frequency (delete the rest) then enter the biss keys as normal. IE.
11382 0000 ** ** ** ** ** ** ** ** (Chelsea TV)
11387 0000 ** ** ** ** ** ** ** ** (PLTV)
11392 0000 ** ** ** ** ** ** ** ** (NBA TV)

---

that method is for when different keys are used but the channels are on the same transponder

these bbc and itv channels etc are all on one transponder with one key for all of them (same key)

tested fox sports on 30w and biss key works ok, as does mgm me on 10e too

still blank on 27.5w although signal and quality all good

edit , scanned pids are incorrect

You have pids ok mate?

Quote:

---

Originally Posted by manic01

You have pids ok mate?

---

no m8

scanned pids are different

if I try manual pid entry its numbers only, no letters allowed so cannot input the actual pids to scan manually on my spiderbox

I still think its either a symbol rate issue or down to this pid entry being digits only, no hex letters allowed

I also tried a few other biss channels from the post by mdt and all worked ok , like 10e and 8w and 30w

I have also checked the info with k o s and lyng sat and they show different details which correspond with my scanned channels and pids

like V not H and dvb-s2 etc

27.5°W Intelsat 907 11495.00 V 64 West DVB-S2 QPSK 44100 9/10

my scanned pids are the same as those listed on K O S too with good signal and good quality levels

Quote:

---

Originally Posted by echelon

no m8

scanned pids are different

if I try manual pid entry its numbers only, no letters allowed so cannot input the actual pids to scan manually on my spiderbox

I still think its either a symbol rate issue or down to this pid entry being digits only, no hex letters allowed

I also tried a few other biss channels from the post by mdt and all worked ok , like 10e and 8w and 30w

I have also checked the info with k o s and lyng sat and they show different details which correspond with my scanned channels and pids

like V not H and dvb-s2 etc

27.5°W Intelsat 907 11495.00 V 64 West DVB-S2 QPSK 44100 9/10

my scanned pids are the same as those listed on K O S too with good signal and good quality levels

---

The pids shown are in hexadecimal. There are 2 different ones shown. 4484 =17540, 19C9 =6601 and 19CA =6602.
1044 =4169, 0065 = 101 and 0066 =102
I've tried both lots without any success on my spider 9000.

hello,
before the new key change,had tried for weeks on spiderbox 9000hd but couldnt get the channels to clear.
tried next with vu solo,worked for a couple of weeks and then stopped clearing the channels . read that the technomate 5402hd ci
was the easiest receiver to set up for this package,so i bought one.works perfectly,living in tenerife and can view this package
with a 1 metre dish.

This will end up the same as PLTV!! to much about it on the net.

Thats life mate.
Buls*t lasting for many years so not always true.

Hi

Reviving this thread with a simple query. I'm not exactly at ease in the matter but I'm running both cccam 2.30 and mgcamd 1.38 in my Solo2. I have the first connected most of the time and it clears fox sports hd at 30ºW anytime but if I move to 27.5ºW, I need to start the latter in order to view what's there. Can someone please tell why this happens ??

Thanks

no one seems to know the answer to that question bud

the keys work fine in mgcamd but not in cccam,they also work fine in oscam y mod but not in the normal oscam when all other biss keys work without issue.

its just strange.

Ian.

Not strange matey..Cccam no longer opens b*lsat or csat with keys either,only mgcamd & oscamymod..I assume its because cccam hasnt been supported in years so it wont tackle the latest keys.

these channels are not clearing today.... looks like a key change although maybe a change in the stream as they have updated something,regards mdt

Quote:

---

Originally Posted by mdt

these channels are not clearing today.... looks like a key change although maybe a change in the stream as they have updated something,regards mdt

---

been told keys have changed. Need to wait for confirmation. At the moment I'm getting Service Invalid ! (timeout reading PMT)

Quote:

---

Originally Posted by kota

been told keys have changed. Need to wait for confirmation. At the moment I'm getting Service Invalid ! (timeout reading PMT)

---

seems the key is still working as its still clearing on TM6900HD SUPER and TM5402HD but it doesnt clear now on my DR-HD F15 which is 95% the same as a TM5402HD/BLADE 7000HD. has anyone got it clearing on a DR-HD D15/F16 regards mdt

Key still works 100% no change with biss key yet .

Change in PMT i had to manually Add channels and all sperate Pids on my Tm5402 M2 HD then add Biss key 8280 for every channel now all works just fine again .

---
Barney

Still clears as stated on TM5402, no need to scan or change pids.