Printable View
Long time my spiderbox 9000 receiver in all my satellites seems to have a problem with signal:hurray::hurray::hurray:. It does not feel the installation or the lnb because I tested another acceptor and it works a favor. Is there anything to answer? thank you very much
Hi Do you get no signal on all satellites?? Are you using a motor??? If the satellites work on the spare receiver then they should work on the Spiderbox unless there is a setup problem or receiver problem. You need to provide more info regarding the Spider setup etc. Regards
I do not use a motor. My installation is very good. I have one of my dishes at 13, 16, and 19, and one second at 42, but I have minimum frequencies
Hi, are you using a Diseqc switch to select Satellites ? if so, can you try a straight hookup from say, 13E or 19E and see what you get.Quote:
Originally Posted by sakis123
Regards Mobley2
do as you told me using the diceqc for all four satellites and showed me 1350 channels around. Other times when I did not encounter this problem I had about 1000 channels above ..
Hi If you are getting 1000 channels. are they from 4 satellites ?? Also when did you do a blinds scan on the satellites???people tend to forget that channels come and go...i bit like us... in my opinion i would get a piece of paper and pen,, write down the following
Hotbird make a note of a channel thats working and write down the frequency for that channel. Then go into satellite settings and make a note of which switch position you are using for Hotbird and note the quality strength for that channel . Then repeat process for the other 3 satellites. If possible send photos of your setup and dish readings from satellites. In my opinion from 4 satellites you should be getting near 3000 channels,,,Regards
Are all of your Lnb's set to Universal ? if not you will be missing frequencies.
Regards Mobley2
All lnd 's is on universal.The frequency hotbird is 65% astra 72%,eutusat 70%...