How to use the BISS plugin? Help
I have installed the BISS plugin but am stuck on the key entry page where it asks for PMT PID. I am trying to open Fox Sports on 8w 11106
What figure do I need to enter here? I cant seem to find it anywhere.
Also, I have a biss keys bin file. Which folder do I need to upload that to?
Many thanks
Can't get the data necessary from your AZbox HD? I beg to differ!!!
A way [internally, in your AZbox HD] to get all the necessary details from your AZbox HD, to mess with the BISS key.bin file, as indicated above...
As we have seen from the previous posts, it is necessary to create your own BISS encryption working key, because not all receivers find the same transponder/channel in the same way/with the same data...
So, one must put in the specific details for each BISS encrypted channel, according to how your own receiver finds those BISS encrypted channels - and those details [transponder frequency etc.] differ from receiver to receiver.
Hence one must note these details from your own receiver, and not from Lyngsat or some such website, giving the transponder approximate, general details of such channels. Here is how to do it in AZbox HD:
1) Find a channel encrypted in BISS CAS [system of encryption];
2) Press OK to get the list of channels and -> note the following:
-tuner A
-satellite position the transponder/channel is on
-the frequency of the transponder etc. and amongst other things
-SID, V-PID and A-PID
...as they are moving from right to left, at the bottom of the page...
3) Additionally [even though it might not be necessary at all]: go to Settings -> TV Channel -> right arrow -> Tuner A. DVB-S -> OK -> Advanced Scan -> OK -> you will find your AZbox HD will get you to that satellite position -> then go lower to the TP Frequency -> find the frequency of the transponder you previously noted down -> press OK -> go to PID Edit -> you will find ALL THE CHANNELS on that transponder and the following details for all of them: PCR, Video, Video Type, Audio and Audio Type.
As I said, just note the data for the channel encrypted in BISS CAS.
Now, I haven't done it yet but it seems reasonable that it should be possible to do it from the data one collects in this fashion... ;) :)
I presume you can do this with your AZbox Editor, too [by telesat]... ;)
Now, who's gonna be a brave soul to actually bother to try this and report back the results...?!?
:respect-051: