Printable View
I have genuine dreambox HD 800 PVR. I had some issue with bootup, I decided to flash it with openpli.
As I NOT an expert, i mistakenly uploaded sim2 file which is designed for cloned box. Now I got error message of "sim 02 TeaM" No CA found.
I am quite worried and I will appreciate your help guys.... please
Attachment 65102
try getting the box into flash mode by booting it with the power button pressed and noting the local ip address etc
then try to flash a genuine dm800 image into the box over the lan (as usual)
if this fails , try a serial cable and dreamup
Thanks mate,
Thanks for your reply. I have tried to start with local IP address while pressing power button but it doesnt seems to work.
I think I have got right null cable to connect dreambox. I am attaching the picture and let me know if Its right or I need any other cable?
Secondly, I have no idea how to do it. Last time, a good gentle man did it remotely for me.Attachment 65103
that is a usb to 9 pin serial adapter, no good in my opinion , it is definitely NOT a null modem cable
you probably need a null modem cable, 9 pin both ends, and an old xp desktop or tower pc, in order to use dreamup
see this old thread here
https://www.satpimps.co.uk/showthrea...Com-port-setup
Yes you are right mate, its not a null cable, but It should be somewhere in my home....
Attachment 65135Attachment 65136Quote:
Originally Posted by echelon
have I got right cables to flash my dreambox through my laptop?
probably, depends how that 9 pin either end cable is wired internally , but if its a null modem cable then yes its correct
the usb adapter is the tricky one, as is your laptop
drivers usually need installing for a start , plus it all depends on the windows operating system being used as well
the cheaper oem versions of 7 , 8 or 10 may not work , maybe not vista home either
the ideal is an old xp pro desktop, tower or laptop that has a 9 pin com port fitted, I have at least one of each myself and so never use anything else
win 7 pro or ultimate should work, win 8.1 pro should work , win 10 full or pro version should work
the usb adapter and the windows os are your weak links and prone to failure
some of those usb adapters never work, yet will operate a serial mouse or a modem
I will appreciate if you can come Skype and help me please
no_786
Attachment 65144Quote:
Originally Posted by echelon
Now I have got an error message of
This device cannot start. (Code 10)
{Not Enough Quota}
Not enough virtual memory or paging file quota is available to complete the specified operation.
Your computer has run out of memory - shut some of the running programs from running - or better still install CCleaner and click on tools/startup and disable some start programs from running. If you don't want to do that - increase your pagefile size (google that).
Code:http://windows.microsoft.com/en-gb/windows/change-virtual-memory-size#1TC=windows-7
I manage to get PC and I have connect my laptop... what to do next?
is anybody there who can help via skype please
my skype is
no_786
I will appreciate your help matteAttachment 65163
I did manage to bring dreambox up to here but I dont know what else to do after that. now its gone back to same message
I seriously need your help guys.... come on... be gentle men
can anybody tell me what to do next?
please
I have never owned a Dreambox, my first foray, into Linux based receivers, was with the VU+ Duo 2, but it looks like you've repaired the problem, according to your attached picture.
Try loading an image, for your receiver.
Is it the Dreambox 8000 HD or Dreambox 8000 SE?
Here are the files for the Dreambox 8000 HD:
https://www.satpimps.co.uk/forumdisp...mbox-DM8000-HD
I didnt know what to do next, I just pulled off the main power cable and turned the dreambox, its back to same error. I dont know where to get right software and upload it to the box. otherwise I would have done it. I dont want to make my box a brick. :)
Looking at the image of the flash software you posted above you are using a sim2 flash software. Have you tried using the latest dream up software which can be found in the dream box section under dream box tools. Then try using a usb to mini usb cable to flash direct to your dream box. You may also need to flash it with the 2nd stage boot loader file first before putting your image file on.
what is bootloader, if you can come online and do it for me, I will appreciate it man.....
i also try using something else ....
Attachment 65169
As you have been told elsewhere
Use the dreamup software with a null modem cable which is what Echelon has already told you to doQuote:
Why are you flashing the sim2 secondstage loader if your receiver is a genuine dm800hd?
This will give you "no ca found".
you can download the dreamup software from here;
https://www.satpimps.co.uk/showthrea...l=1#post940278
You can download the genuine DM800HD secondstage bootloader from here;
You can download a genuine image from here:Code:http://www.dreamboxupdate.com/download/7020/secondstage-dm800-84.nfi
Once you have done all this you can then flash any Original DM800HD Image you like to the boxCode:http://www.dreamboxupdate.com/opendreambox/2.0.0/images/dm800/dreambox-image-dm800-20160105.nfi
BUT DO NOT PUT A CLONE IMAGE ON IT ONLY GENUINE IMAGES
If you do not use the right tools for the job you will never get the job done
@Mickha
that is the wrong info for this guy as he states he has a genuine DM800HD, not a DM8000HD
St.O
*** I want to say thanks to every body who helped me within their capacity to get my dreambox fixed. ***
Now I have couple of issues....
Since I uploaded Channels list,
- I cant find IPTV which was part of OpenPli image ----
- I cant find the feature of http://192.168.0.8:16003/servers anymore.
I will appreciate your help guysAttachment 65170
Your new channel list that you have uploaded has overwritten the PLi one so IPTV channels have goneQuote:
I cant find IPTV which was part of OpenPli image ----
you will need to reinstall CCcam and configs, the new image you have installed doesn't contain themQuote:
St.O